Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Vinyl Fence Installation Cost in Fort Lauderdale?
Vinyl fence installation in Fort Lauderdale typically costs between $3,500 and $9,000 for a standard residential yard, with most homeowners paying around $5,000 to $6,500 for roughly 150 to 200 linear feet of quality vinyl fencing. The final number depends on fence height, total linear footage, the condition of your soil, whether you need old fence removal, and which vinyl product line you choose. This guide breaks down exactly where the money goes, what drives the price up or down, and how to get a written number you can hold us to before any work starts.
If you’re comparing bids right now, start with our Vinyl Fence Installation in Fort Lauderdale service page, then come back here for the full pricing picture. We write the price down before we dig the first post hole, and that number doesn’t change at the door.
Key Takeaways
- Typical range: $3,500 – $9,000 for a standard Fort Lauderdale residential vinyl fence.
- Per-linear-foot pricing: Most vinyl fence jobs in Broward County run $35 – $65 per linear foot installed, depending on height and style.
- Biggest cost drivers: linear footage, fence height (4 ft vs 6 ft), gate count, old fence removal, and soil conditions.
- Hurricane code matters: Fort Lauderdale’s wind load requirements mean deeper post settings and sometimes more concrete than inland Florida cities.
- Written price before work starts: You get a fixed number, not a ballpark, and the 365-Day Done Right Promise in writing.
Vinyl Fence Installation Cost Breakdown (2026)
Here’s where the money actually goes on a vinyl fence installation in Fort Lauderdale. These are line-item ranges we see across Broward County in 2026, calibrated for local material costs, labor rates, and the wind-load requirements that come with coastal installation.
| Line Item | Typical Cost Range (Fort Lauderdale, 2026) | Notes |
|---|---|---|
| Vinyl fence materials (per linear foot) | $22 – $38 | Basic 4 ft picket to 6 ft privacy; premium privacy panels run higher |
| Labor and installation (per linear foot) | $13 – $27 | Includes digging, setting posts, rails, panels, cleanup |
| Concrete footings (per post) | $12 – $25 | Deeper settings for Broward wind-load code |
| Gate (single walk gate, 4 ft) | $250 – $450 | Hardware included; double driveway gates cost more |
| Old fence removal and haul-off | $300 – $900 | Depends on fence type and linear footage |
| Permit and inspection fees | $100 – $350 | Varies by municipality and fence height |
| Total project (typical 150 – 200 linear ft) | $3,500 – $9,000 | Most homes land around $5,000 – $6,500 |
The single biggest driver is linear footage followed by fence height. A 4-foot picket fence around a small Victoria Park front yard runs at the low end. A 6-foot privacy fence wrapping a full quarter-acre lot in Riverside Park or Shady Banks pushes toward the top, especially with multiple gates and an old wooden fence that needs to come out first.
One thing we tell every Fort Lauderdale homeowner: vinyl costs more up front than pressure-treated pine, but you’re not paying for staining every two years or replacing rotted pickets after a wet season. Salt air near Las Olas or Harbor Beach accelerates wood decay fast. Vinyl doesn’t care about salt, termites, or the afternoon thunderstorms we get from June through October.
What Affects Vinyl Fence Installation Pricing in Fort Lauderdale
- Linear footage: This is the obvious one. A 100-foot fence around a small Imperial Point courtyard costs less than 300 feet wrapping a corner lot in Sailboat Bend. Most quotes are built per linear foot, so every foot counts.
- Fence height and style: A 4-foot picket fence uses less vinyl and fewer materials than a 6-foot privacy panel. Posts for a 6-foot fence also need to be set deeper, which means more concrete and more labor.
- Wind-load requirements: Fort Lauderdale sits in a high-velocity wind zone. The Florida Building Code requires fence posts here to be set deeper and with wider concrete footings than in, say, Orlando or Gainesville. We typically go 30 to 36 inches deep with 8-to-10-inch footings. That’s more concrete, more digging, more time, and a sturdier fence that doesn’t lean after the first summer squall.
- Soil conditions: Parts of Fort Lauderdale, particularly near the New River and the canals, sit on sandy or mucky soil verging on water table. Digging in loose sand means wider holes and sometimes more concrete per post. We’ve hit saturated ground in Rio Vista and Sailboat Bend that needed extra fill and compaction.
- Old fence removal: If you’re replacing a rotted wooden fence or a rusted chain-link, demolition and haul-off add $300 to $900 depending on how much is there and what it’s made of. Concrete-set wooden posts take longer to pull than chain-link posts in soil.
- Gate count and hardware: Every gate adds material, hinges, latch hardware, and install time. A single walk gate runs $250 to $450. A double-wide driveway gate with heavier posts and hardware can add $800 to $1,500 or more on its own.
Vinyl vs. Other Fence Materials: Cost in Context
If you’re on the fence between vinyl and something else, here’s how the numbers compare in the Fort Lauderdale market as of 2026. These are installed price ranges for a typical 150-to-200-linear-foot residential fence.
- Pressure-treated pine: $2,800 – $5,500 installed. Cheapest up front, but you’ll stain or seal it every two years in this humidity, and salt air eats pine posts.
- Vinyl: $3,500 – $9,000 installed. Higher front-end cost with almost no maintenance beyond an occasional rinse.
- Aluminum: $4,000 – $10,000 installed. Great for pool code and beachside modern look, but it doesn’t give you privacy.
- Composite: $5,000 – $12,000 installed. Closest to wood in look, premium material, heavier than vinyl and slower to install.
Vinyl lands in the sweet spot for most Fort Lauderdale homeowners who want privacy, no upkeep, and a clean look that holds up to salt, sun, and hurricane season. The UV stabilizers in modern vinyl keep white fences from yellowing, and the panels flex instead of cracking when debris hits them during a storm.
How to Save on Vinyl Fence Installation
Saving money doesn’t mean cutting corners. It means making smart calls before the crew shows up.
- Get the fence line surveyed or marked. If you know your exact property line, we don’t have to guess or run a new survey. That saves time and keeps your neighbor relationship intact. In Fort Lauderdale’s older neighborhoods like Poinsettia Heights or Lake Ridge, property lines don’t always match where the old fence sits.
- Do the demo yourself: If you have a pickup truck and a weekend, pulling an old chain-link fence before we arrive saves $300 to $900. Call us first and we’ll tell you exactly what to leave in place for a clean install.
- Bundle gates: If you’re adding two walk gates and a driveway gate, we can sometimes reduce hardware costs by standardizing gate sizes and hardware packages. Same quality, less custom ordering.
- Choose off-peak months: Fence crews in South Florida book heaviest in the fall after hurricane season and in early spring. Scheduling between April and June, when the afternoon rains haven’t peaked, can sometimes mean faster scheduling and occasionally a small seasonal break.
- Standardize panel height: Sticking with a standard 6-foot privacy panel rather than a custom height keeps material costs predictable. Custom heights mean custom post depths and panel cuts, which cost more.
The surest way to avoid surprise costs is a written price before work starts. Call (754) 551-2922 and we’ll schedule a walk-through, measure the line, check soil and access, and hand you a fixed number. No verbal ballpark, no day-of upcharge. If the estimate says $5,800, that’s what you pay unless you change the scope.
Permits and Code Requirements in Fort Lauderdale
Fort Lauderdale and most Broward County municipalities require a permit for any fence over 4 feet tall, and in many cases for any fence at all in a front yard or corner lot. We handle this as part of the installation. The permitting process typically adds $100 to $350 to your project, depending on the city and the fence’s location on your property.
Two local code points worth knowing before you plan:
- Height limits: Fort Lauderdale generally caps residential fences at 6 feet in rear and side yards, and 4 feet in front yards or anywhere within a front setback. Corner lots in neighborhoods like Croissant Park and Tarpon River often have visibility triangles where the city requires shorter fence sections so drivers can see around the corner.
- Wind-load ratings: Vinyl fence products sold here need to meet Florida Building Code wind-load requirements for the High Velocity Hurricane Zone that covers Broward and Miami-Dade. The cheap big-box vinyl you see online often doesn’t carry the right product approvals for a Fort Lauderdale permit. We source vinyl with proper Miami-Dade and Broward approvals so the permit passes inspection the first time.
We pull the permit, schedule the inspection, and stand for the inspection if the city requires someone on site. If we take on the permit, it’s our responsibility to make sure the fence passes.
What Happens When the Fence Fails? Our Guarantee in Plain Terms
Every Penhallow Remodeling vinyl fence installation carries the 365-Day Done Right Promise. Here’s exactly what that means, in writing, before the first post goes in the ground:
- Written price before any work starts. Not an estimate range, not a verbal ballpark. A fixed number on paper that we’re bound to.
- A defined arrival window, and we show up when we said we would.
- A clean job site when we leave. You shouldn’t find concrete bags, vinyl scraps, or leftover post holes in your yard after we’re gone.
- If something fails within 365 days, we come back and fix it at no charge. A leaning post, a sagging gate, a cracked panel that never should have cracked. If it’s not done right, we make it right, covered in writing on every project.
- If a repair fails, the second visit is free. No service call, no re-inspection fee, no negotiation. We just come back.
This is the home standard set by the Kingswell family of companies, operating to The Kingswell Way since 2004: say the price before the work, show up in the window we gave, clean up behind ourselves, and put the guarantee in writing. Each Penhallow location is independently owned and operated. We’re held to the same standard here in Fort Lauderdale as every other Kingswell location across the country.
Your project is led by Trevor Nash, who oversees every vinyl fence installation we take on in Fort Lauderdale. Trevor has been setting posts in South Florida soil long enough to know what sand, water table, and wind load do to a fence. He’s the one who reviews your written price before it lands in your hands, and he’s the one who answers for the guarantee if something isn’t right.
FAQs – Vinyl Fence Installation Cost
How much does a vinyl fence cost per linear foot in Fort Lauderdale?
Installed vinyl fencing in Fort Lauderdale runs $35 to $65 per linear foot in 2026, with materials accounting for $22 to $38 of that and labor and installation making up the rest. A 200-foot fence at $45 per foot lands at $9,000; a smaller 100-foot job at $38 per foot lands near $3,800. Call (754) 551-2922 for a per-foot quote on your specific fence line, and we’ll put the written number in your hands before work begins.
Is vinyl fence cheaper than wood in Fort Lauderdale?
Wood is cheaper up front, with pressure-treated pine running $2,800 to $5,500 installed compared to $3,500 to $9,000 for vinyl. But over ten years in Fort Lauderdale’s salt air and humidity, vinyl usually costs less because you’re not paying for staining every two years, replacing rotted pickets, or rebuilding posts after termites. If you plan to stay in the house more than five years, vinyl wins on total cost of ownership.
How much does it cost to replace an old fence with vinyl?
Replacing an existing fence with vinyl adds $300 to $900 for removal and haul-off of the old fence, on top of the $3,500 to $9,000 installation range. A straightforward chain-link removal runs closer to $300, while a rotted wooden fence with concrete-set posts pushes toward $900. We include demolition in the written price so there’s no surprise line item on invoice day.
Do I need a permit for a vinyl fence in Fort Lauderdale?
Yes, for most residential vinyl fences over 4 feet tall, and often for any fence in a front yard or corner lot. Permit fees typically run $100 to $350, and we handle the application, the inspection scheduling, and the inspection itself as part of the job. We only install vinyl products with Broward and Miami-Dade wind-load approvals so your fence passes inspection the first time.
Can you install a vinyl fence the same week in Fort Lauderdale?
In most cases, yes. After your written estimate is approved and the permit is pulled, a standard residential vinyl fence install takes one to three days on site. Permitting can add a few days to a couple of weeks depending on the city’s current turnaround. A live person answers our phone 24/7 at (754) 551-2922, so you’ll get a straight answer on scheduling the first time you call.
How long does a vinyl fence last in South Florida?
A quality vinyl fence installed to Broward wind-load code in Fort Lauderdale lasts 20 to 30 years, often longer with minimal care. Modern vinyl is formulated with titanium dioxide UV inhibitors that resist yellowing from the intense South Florida sun, and the material doesn’t rot, warp, or attract termites like wood does. The posts and concrete footings are the structural core; set them correctly and the fence will outlast two or three wooden fences in this climate.
Get Your Written Vinyl Fence Price in Fort Lauderdale
The only way to know what your vinyl fence will cost is to have us walk the line, measure it, check the soil, and give you a number in writing. No vague ranges, no day-of surprises. That’s the Kingswell standard, and it’s the way Trevor Nash runs every Penhallow Remodeling Fort Lauderdale project: written price before work starts, a real arrival window, a clean job site, and the 365-Day Done Right Promise in writing.
Call (754) 551-2922 for a free estimate. A live person answers, day or night, and we’ll get your fence measured and priced. If you’re still exploring what vinyl can look like on your property, start with our Vinyl Fence Installation in Fort Lauderdale page to see how we handle fencing projects from first measurement to final walkthrough.
Pricing reflects the Fort Lauderdale market as of 2026. Penhallow Remodeling Fort Lauderdale offers free estimates – call (754) 551-2922.
Written by Trevor Nash, Owner at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and surrounding Broward County communities.
What Our Customers Say
"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike"We'd been burned by a contractor before who disappeared halfway. Penhallow finished on time and stood behind everything. The written price gave me peace of mind the whole way."
- Simone Clarke"Redid two bathrooms at once. The crew protected the floors and cleaned up every single day before leaving. Quote was detailed and there were no mystery charges at the end."
- Tricia Dawson
