Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Lauderdale Homeowners Choose Cambria Construction
We’re Penhallow Remodeling Fort Lauderdale, an independent contractor that offers our General Contractor services to install and service Cambria quartz across Broward County. A Cambria countertop or island top in a Fort Lauderdale kitchen typically lands between $2,000 and $6,500 for installation, and our team handles everything from chip repair and edge polish to full slab replacement. We are not affiliated with or authorized by Cambria, but that independence lets us give you an honest repair-first quote without a manufacturer’s bias. Call (754) 551-2922 and we’ll tell you what the job costs before anyone picks up a tool.
We’ve worked with Cambria in Fort Lauderdale long enough to know how this American-made quartz behaves in salt air, hurricane-window sunlight, and high-humidity kitchens. We work with the Brittanicca, Torquay, Ella, and Portrush series weekly, which means we know their seams, their edges, and their failure points before we walk in your door. Whether you’re replacing a cracked island overhang in Rio Vista or adding a matched remnant to a 1950s ranch kitchen near Sailboat Bend, we quote Cambria work the same way: a written price up front, a real arrival window, and a 365-day promise to make it right.
Why Trust Penhallow Remodeling Fort Lauderdale for Your Cambria Construction?
Trevor Nash, our owner, learned the trade at Los Angeles Trade-Technical College before spending the better part of two decades swinging a hammer and running crews across South Florida. He’s handled everything from full gut-renovations near Las Olas Boulevard to modest bathroom updates for longtime Fort Lauderdale homeowners who just want the tile done right the first time. That experience matters when it comes to Cambria because this material is not forgiving of shortcuts, and Southeast Florida’s climate finds every shortcut eventually.
We service Cambria with a repair-first mindset. Our technicians know which chipped edges can be polished out and which fractures near a sink rail or cooktop mean the slab has lost structural integrity. We use genuine Cambria remnants or full slabs for any repair or addition because aftermarket quartz never matches Cambria’s exact pattern or depth. And every Cambria job we touch carries our written guarantee: if it fails inside a year, we come back and fix it at no charge. Not a verbal promise. In writing, on every project. That’s the Kingswell standard our company has followed since 2004, and it applies to your Cambria work like everything else.
Styles & brands we work with
Common Cambria Construction Problems We Fix in Fort Lauderdale
- Chipped edges on eased-edge profiles. Cambria’s matte finishes, like the kind you see on Brittanicca and Torquay, chip more easily along sink and faucet cutouts than polished edges do. A dropped cast-iron pan or a careless plumber’s wrench is usually the culprit. We fill and polish these chips using color-matched quartz filler, and when the chip is small enough, the repair is nearly invisible.
- Faded inkjet patterning near west-facing windows. Cambria’s veining is printed onto the quartz surface, and while the material itself is UV-stable, prolonged direct sunlight through hurricane-impact glass can reduce contrast in busy patterns like Ella. It’s not a defect, it’s a reality of the Florida sun. We tell homeowners this before they buy, and we recommend deeper overhangs or window film in kitchens where an entire slab will bake for six hours a day.
- Stress cracks from unsupported overhangs. This is the one we see weekly in Fort Lauderdale condos and waterfront homes. A fabricator skips the steel corbel or hidden bracket under a 14-inch island overhang, and the slab eventually shows hairline deflection cracks. Cambria requires proper support at any overhang beyond 12 inches. If the corbel isn’t there, the crack will come back no matter how many times you patch it.
- Seams opening up in humid kitchen environments. Cambria seams are joined with color-matched adhesive, but Fort Lauderdale’s humidity plus seasonal wood-frame movement can make a seam open slightly over time. We re-tighten seams, clean the joint, and re-bond with adhesive matched to your slab’s exact pigment. Done right, the seam disappears again.
- Veined slabs with fill lines or resin pools. Portrush and other dramatic veined designs can show visible fill lines if the fabricator didn’t lay out the slab directionally before cutting. You can’t un-cut a slab, but you can replace a disappointing section with a properly matched remnant. We template the area, order a matched piece from the same batch if possible, and install it with grain direction running the way it should.
Cambria Parts & Our Repair-vs-Replace Approach
Cambria doesn’t sell “parts” the way an appliance brand sells a burner or a switch. What matters is the slab itself, and the reality is simple: aftermarket quartz never matches Cambria’s exact pattern, depth, or finish. We use genuine Cambria remnants or full slabs for any repair, extension, or addition. That’s not a sales pitch, it’s a fact of the material. A mismatched patch on a Brittanicca peninsula looks exactly like what it is: a mismatched patch.
We quote repair first whenever it makes sense. Polishing a chipped edge, filling a small fissure, re-tightening a seam, re-leveling a section of countertop – these are all done on site, often in a single visit. But when a slab is fractured near a cooktop or sink rail, or when an overhang has cracked through to the substrate, we’ll tell you straight that replacement is the only honest fix. We don’t patch something that will fail again before hurricane season ends. Call (754) 551-2922 and we’ll walk you through what we’d do and what it costs.
Our Cambria Service Process – Step by Step
- 1
Diagnosis. We measure the slab, check the substrate and supports, and identify the exact Cambria series and finish. If it’s a chip or seam issue, we note the edge profile because eased and polished edges repair differently.
- 2
Written quote. Before any work begins, you get a written price in hand. Not a verbal ballpark. If we need to order a matched remnant, we include that cost and the lead time in the quote.
- 3
Repair or install. For chip fills and seam work, we color-match on site. For new Cambria installation, we template, fabricate, and install with the manufacturer’s recommended support, including steel corbels or hidden brackets on overhangs over 12 inches.
- 4
Test and walk-through. We check every seam, every edge, every overhang. You walk the slab with us before we call the job done.
- 5
Written warranty. Every Cambria job comes with our 365-Day Done Right Promise in writing. If it fails inside a year, we return and fix it at no charge, no service call, no re-inspection fee.
See the difference
Before
After
Before
After
Before
AfterCambria Products We Service & Install in Fort Lauderdale
We install and service the full Cambria quartz lineup, but the series we see most often in Cambria in Hollywood and Fort Lauderdale kitchens are Brittanicca, Torquay, Ella, and Portrush. Brittanicca and Torquay are the workhorses of the coastal kitchen: matte to low-sheen finishes, forgiving veining, and a depth that hides daily wear. Ella and Portrush pull in bolder veining for homeowners who want a statement island. We stock common Cambria remnants for small repairs and can source full slabs through local distributors, which keeps lead times shorter than you’d expect in South Florida.
We also handle Cambria Construction in Oakland Park, FL and surrounding areas, including work around the slab itself: kitchen islands, full kitchen remodels, backsplash work, and cabinet installation that carries the weight of the stone properly. If the cabinets aren’t level, the slab tells you within a year. We build the substrate right the first time.
We Also Service These Brands
Cambria is one of several lines we work with, and that multi-brand experience matters when you’re comparing surfaces. We also install KraftMaid cabinetry, Silestone quartz, and Kohler and Toto fixtures, so your Cambria countertop sits on a foundation and beside fixtures we know just as well. You’re never locked into one brand’s ecosystem with us.
FAQs – Cambria Construction Service in Fort Lauderdale
Yes, in most cases a chipped edge on a eased or pencil profile can be filled with color-matched quartz filler, sanded to the original profile, and polished to blend with the surrounding surface. Chips under a quarter-inch are routine repairs for us. Larger fractures near a sink rail or cooktop cutout, where the slab’s structural strength is compromised, usually require replacement. Call (754) 551-2922 for an honest assessment, and if we can repair it instead of replacing it, we’ll quote you the repair first.
That roughness is usually micro-etching plus a residue buildup from cooking oils, acidic spills, and aggressive cleaners, and it concentrates near the stove because that’s where the most contact happens. Cambria’s matte finishes in the Brittanicca series show this more than polished surfaces do. We deep-clean and re-hone the affected area to restore the original finish, then recommend a maintenance routine that won’t dull the surface again in six months.
Yes. Any overhang beyond 12 inches needs steel corbels or hidden brackets anchored to the cabinet or framing below. We’ve pulled cracked island overhangs in Fort Lauderdale condos where the fabricator skipped the steel. The slab deflects under its own weight, and quartz doesn’t flex – it cracks. When we install a Cambria island top, we build the support into the quote so the number you see on day one includes everything the job actually needs.
Cambria’s warranty does not cover outdoor installation, and for good reason: prolonged direct UV exposure degrades the inkjet patterning, and Fort Lauderdale’s salt air and daily summer thunderstorms punish any outdoor surface without regular sealing and care. Quartz outdoors in this climate will fade and lose contrast faster than indoors. If you want an outdoor countertop, we’ll steer you to a material built for that environment and be straight with you about the trade-offs.
We order a remnant or new slab from the same Cambria series and, when possible, the same production batch as your existing countertop, then template the extension so the veining direction runs the way the eye expects. Exact pattern matching is not always possible because no two slabs are identical, but same-series, same-batch remnants get you as close as the material allows. We show you the remnant before cutting so you know exactly what’s going in.
Here’s what we quote in Fort Lauderdale for Cambria quartz work. These ranges include material and labor, and the final number depends on slab series, linear footage, edge profile, and whether we’re building new substrate or working over existing cabinets.
| Project | Typical Range |
|---|---|
| Countertop Installation (Cambria quartz) | $2,000 – $6,500 |
| Kitchen Remodel (with Cambria countertops) | $14,000 – $45,000 |
| Kitchen Island Installation (Cambria top) | $3,000 – $10,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Backsplash Installation | $800 – $2,500 |
Call (754) 551-2922 and we’ll give you a written quote with your exact number. That’s the only way pricing works with us: you get the number before the work starts, and that’s the number on the invoice.
Book Your Cambria Service in Fort Lauderdale, FL
Tell me what you need, I’ll tell you what it costs, then we’ll get it done. That’s how Trevor Nash runs our jobs. Call (754) 551-2922 to schedule your free Cambria estimate in Fort Lauderdale. A real person answers, and your written quote is on its way.
Written by Trevor Nash, Owner at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale, FL since 2004.
