Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Roofing: The Fort Lauderdale Owner’s Guide
KraftMaid doesn’t manufacture roofing, which means if you’re holding a part stamped with that name, you’re likely dealing with a mismatched component, a product rebrand, or a contractor who used the wrong material on your Fort Lauderdale home. Roof replacement in Fort Lauderdale typically runs $8,000 – $20,000, and most roof repairs land between $400 and $1,800 depending on what’s actually failing. Here’s what usually brings homeowners to us: a leak shows up near a valley or flashing point, the roofer who did the last patch is no longer answering, and someone told them the material was “KraftMaid-rated” without explaining what that means.
We’re an independent Fort Lauderdale contractor, not affiliated with KraftMaid. What we can do is identify what’s actually on your roof, match it to the right replacement material or part, and give you a written number before any work starts. If your roofing issue traces back to a cabinet maker’s brand name, something got crossed in translation and we should sort it out before you spend another dollar.
Which KraftMaid Models This Applies To
KraftMaid builds cabinetry and millwork: wall cabinets, base cabinets, vanities, pantry units, and drawer systems. None of those products are rated for exterior roofing use in Fort Lauderdale’s sun, salt air, and hurricane-season rain. If you have a KraftMaid label on a roofing component, it’s almost certainly a packaging mix-up, a distributor’s internal code, or a label from a different product line entirely that got misread.
The practical step is to match what’s actually on your roof, not the label. We check the material type first: asphalt shingle (three-tab or architectural), concrete tile, clay barrel tile, standing-seam metal, or flat-roof membrane. For asphalt shingles, the brand usually appears on the underside of a spare bundle or on the selvage edge; architectural shingles from GAF, Owens Corning, and CertainTeed dominate Fort Lauderdale roofs because they handle wind uplift better than builder-grade three-tab. For tile, the manufacturer’s stamp is often faint but checkable on the underside of a broken piece. For metal, the profile and seam spacing tell us more than any label. We measure, we match, and we write down exactly what we’re installing before you pay anything.
One compatibility gotcha we see often: homeowners assume a “lifetime” shingle means the underlayment and flashing last as long. They don’t. In Fort Lauderdale’s humidity, peel-and-stick underlayment typically needs evaluation at the 15 – 20 year mark even when the shingles above it still look fine. The roof is a system, not a single part.
Styles & brands we work with
Signs Your KraftMaid Roofing Is Failing
- Water staining on ceilings or upper walls. This usually means a flashing point or valley has separated, not that the whole roof failed. In Fort Lauderdale, afternoon thunderstorms find the weak spot fast, and the stain is often far from the actual leak because water travels along rafters before it drops.
- Granules collecting in gutters or at downspout outlets. Asphalt shingles shed granules as they age, but a sudden heavy accumulation after a storm usually means hail or wind damage. South Florida gets both, and granule loss shortens the shingle’s UV protection, which accelerates cracking.
- Curling or lifting shingle edges. Heat and humidity cause the asphalt to dry and shrink, especially on south-facing roof planes in Fort Lauderdale. Once edges lift, wind-driven rain gets underneath and the underlayment starts working harder than it was designed to.
- Tile cracks or slippage after a storm. Concrete and clay tiles are heavy and durable, but the fasteners and mortar that hold them fail before the tile itself does. A slipped tile exposes the underlayment, and three slipped tiles in a row is a sign the whole field needs fastener evaluation.
- Rust on metal flashing or roof-to-wall joints. Fort Lauderdale salt air corrodes galvanized flashing faster than inland areas. Once rust eats through a flashing joint, water follows the fasteners into the decking. This one looks small and costs more than you’d expect when it’s ignored.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fort Lauderdale roof repair runs $400 – $1,800 for most single-issue fixes: a failing section of flashing, a handful of broken tiles, a small shingle patch, a rusted pipe boot. A full roof replacement runs $8,000 – $20,000 depending on square footage, roof pitch, material choice, and whether the existing decking needs repair once the old roof comes off. Metal roof installation runs higher, $15,000 – $40,000, because the material and the labor to seam it correctly both cost more.
What drives your number up or down: the roof’s slope (steeper costs more in labor and safety equipment), the number of penetrations like vents and skylights, the condition of the decking beneath, and whether we’re reusing existing flashing or replacing it. Every quote we write includes the parts, the labor, the dump fees, and the warranty. We don’t quote a range and then “discover” problems after the tear-off. The number you see on day one is the number on the invoice, in writing, before any work starts.
DIY or Call Us?
There are things on a roof you can check from the ground: missing shingles after a storm, a visible tile out of place, rust staining on flashing, granules in the gutter. There are things you should not do yourself: walk a steep roof, remove tiles or shingles to look underneath, or use roofing cement as a “temporary” patch that then becomes permanent. Roofing in Fort Lauderdale involves fall risk, heat exposure, and the very real possibility of making a small leak bigger by stepping in the wrong place.
If you can see the problem from the ground, snap a photo and call us at (754) 551-2922. Trevor Nash will look at what you’re describing and give you an honest read on whether it’s a repair or a replace situation before anyone climbs a ladder. If you can’t see water but you know it’s coming in, that’s also a call us situation. We find leaks by tracing water, not by guessing.
FAQs
Asphalt shingle roofs in Fort Lauderdale typically last 15 – 25 years, concrete or clay tile 30 – 50 years with proper underlayment replacement, and standing-seam metal 40 years or more. The underlayment is the part that fails first in our climate, usually well before the visible surface material. Call (754) 551-2922 for an in-person assessment if your roof is past the 15-year mark.
Yes, in most cases a failed flashing point, a small tile cluster, or a damaged shingle section can be repaired without replacing the roof. The caveat is that repeated repairs in different spots often signal the roof has reached its useful life. We’ll tell you straight: repair what’s fixable, replace what isn’t worth patching again.
Most single-issue repairs take a half day to a full day on site, weather permitting. A full replacement typically runs 2 – 5 days depending on size and material. We give you a defined arrival window before we start, and we leave the job site cleaner than we found it, per The Kingswell Way.
We source materials from recognized trade brands and match what’s already on your roof: asphalt shingle, concrete or clay tile, standing-seam metal, and flat-roof membrane. If your roof uses a material we don’t install regularly, we’ll tell you that before we quote the job, not after we’ve started it. Call (754) 551-2922 and tell Trevor Nash what you need; he’ll tell you what it costs, then we’ll get it done.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
