Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The Fort Lauderdale Owner’s Guide
KraftMaid windows and doors are cabinet-grade components built for kitchens, baths, and built-ins, not full exterior replacement windows. Most Fort Lauderdale homeowners find us because a hinge has sagged, a glass insert is fogged, or a door no longer sits square in its frame. We match KraftMaid parts by series, finish, and dimension, and we install them for a typical cost of $180 – $520 per door or window assembly, including the hardware and labor. If you’re standing in your kitchen right now looking at a door that won’t close, here’s the short version: we can almost certainly get the right part, and we’ll give you a written price before we touch anything.
What usually happens first is subtle. A hinge pin works loose, or you notice the door rubs the frame on the bottom corner. In Fort Lauderdale’s humidity, wood-grained MDF doors from older KraftMaid lines absorb moisture unevenly, and that’s when the geometry starts to drift. By the time most people call, the part has been failing for months. Trevor Nash has pulled enough of these apart across Broward County to know that the fix is usually simpler than the damage it causes when it’s ignored.
Which KraftMaid Models This Applies To
KraftMaid has produced several cabinet lines over the years, and the windows and doors that come up most often in Fort Lauderdale homes are from the KraftMaid Venicia, KraftMaid Passport, and the current KraftMaid Vantage series. The Venicia line is the one to watch: it used a European-style frameless design, and its hinge plates and glass door inserts are not interchangeable with the Passport or Vantage lines. If you have a Venicia glass door that’s cracked or fogged, you need a Venicia-specific insert. An aftermarket glass panel will not seat correctly because the door profile is milled to accept a specific gasket depth.
To identify your part, open the door and look for a white or silver label on the hinge-side edge or on the interior of the frame. KraftMaid stamps a manufacturing code there that includes the line and production date. If the label is gone, measure the door’s height and width to the nearest 1/16 inch, and note the hinge spacing. Hinge screws on KraftMaid doors are typically spaced 100mm apart on European-style lines and 2.5 inches on framed lines. That spacing tells us which hardware family you need before we ever place the order. We’re an independent service provider, not a KraftMaid dealer, which means we can match both OEM parts and quality aftermarket equivalents and recommend the right one without a sales agenda.
Styles & brands we work with
Signs Your KraftMaid Windows & Doors Is Failing
- The door rubs or won’t close fully. This is usually hinge wear or a frame that’s shifted slightly out of square from humidity cycling. In Fort Lauderdale, the wet season does this to cabinet doors every year.
- Glass is fogged between the panes. Once a KraftMaid insulated glass insert loses its seal, moisture gets trapped between the lites. This cannot be polished out, and it’s the single most common reason we replace glass door inserts in kitchens near Las Olas and Victoria Park.
- The hinge pin keeps backing out. KraftMaid hinges are pressed or screwed into the door and frame; once the receiving threads strip, the pin will not hold. Retightening works for a week, then it’s loose again.
- The door sags visibly when open. This points to a worn hinge cup or a cracked door panel at the hinge mount. Clamping and gluing can buy time, but a new hinge plate is the lasting fix.
- The corner joint is separating. Fort Lauderdale’s humidity has a way of finding any weak glue line. If you can see daylight through a corner joint, the panel has moved beyond adjustment, and it’s time to replace the door rather than chase it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, expect to pay $180 – $520 for most KraftMaid door or window replacements installed. The low end covers a standard framed door with matched hinge hardware. The high end covers Venicia glass inserts, doors with specialty glazing, or units that need frame correction before the new part goes in. The range shifts on three things: whether the part is OEM or a quality aftermarket match, whether the hinge plates need replacing along with the door, and whether we’re also adjusting the adjacent doors so the whole run sits even.
Here’s the line-by-line transparency you get from us:
- Part: $90 – $320 depending on series and glazing
- Hardware (hinges, plates, catches): $20 – $60 per door
- Labor, including fit adjustment: $70 – $140 per unit
Every job gets the written price before work starts and the 365-Day Done Right Promise in writing: if the door doesn’t sit right inside the guarantee period, we come back and make it right at no charge.
DIY or Call Us?
You can check the obvious things: confirm the hinge screws are tight, note the label info, and measure the door. What you shouldn’t do is try to force a misaligned door back into plane with longer screws or shims. KraftMaid doors, especially the frameless Venicia line, rely on precise hinge geometry. When a homeowner drives a 2-inch screw into a stripped hinge cup, the door is usually ruined, and now we’re replacing the whole unit instead of a hinge plate. Glass inserts are another spot where we’d tell you not to learn by doing: removing a cracked insert without the right gasket tools leaves sharp edges and a frame that won’t seal.
If the door is binding, sagging, or fogged, call us at (754) 551-2922. We’ll ask for the measurements, tell you whether it’s a stock part or a special order, and give you a written number before we schedule. No charge for the estimate.
FAQs
KraftMaid doors and glass inserts typically last 10 – 15 years in Fort Lauderdale before the hinge hardware or the insulated glass seal gives out. Homes without consistent air conditioning see failures sooner because the humidity cycles are harder on the glue joints and the gaskets. Coastal-zone homes east of US-1 also deal with salt-air corrosion on metal hinge components. Call (754) 551-2922 for a free estimate, and we’ll tell you whether the door is worth saving or if replacement is the smarter money.
No, once the seal fails, the inert gas between the glass lites has escaped and the fogging will not clear permanently. Drilling and drying a pane is a temporary trick that fails again within a season. The correct fix is a new insert matched to the door’s profile, and that’s a job we do regularly in Fort Lauderdale for $180 – $320 depending on the door line and glazing. Call (754) 551-2922 to get a written price for your specific door.
If we have the matched part on the truck or on order locally, the swap takes 45 minutes to two hours per door or insert. Special-order KraftMaid Venicia inserts can take five to ten business days to arrive at our Fort Lauderdale shop, and we’ll tell you that timeline before you commit. Once the part is in hand, we schedule around your day and show up in the arrival window we give. Call (754) 551-2922 and we’ll check stock before you hang up.
We keep the most common KraftMaid hardware on our trucks: European hinge plates, standard hinge cups, catches, bumpers, and a range of gasket profiles for glass inserts. Full doors and inserts are matched to your measurements and ordered as needed. We also maintain a working list of parts for Cambria, Silestone, and Kohler fixtures, because a kitchen rarely has just one thing going wrong at a time. Call (754) 551-2922 with your door dimensions and we’ll tell you right away what’s stopping the fix.
Tell me what you need, I’ll tell you what it costs – then we’ll get it done. That’s been the rule on every job we’ve run in Fort Lauderdale, and it’s the rule on a $200 hinge replacement too.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
