Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Fence Installation: The Fort Lauderdale Owner’s Guide
Cambria fence installation in Fort Lauderdale typically runs $3,500 – $9,000, depending on the fence length, the Cambria profile you’re matching, and whether we’re setting new posts or working with what’s already in the ground. We stock Cambria-compatible fence panels and hardware locally, which means we can often get your fence rebuilt within a week of the estimate. Most owners discover a problem the way you probably just did: a section sags after a storm, a post leans overnight, or a panel cracks at the fastener line and suddenly the whole run looks tired.
Which Cambria Models This Applies To
Cambria’s fencing line breaks down by panel height and picket spacing, not by year, so matching a replacement panel to your existing run comes down to two measurements: the nominal panel height (typically 4 ft, 5 ft, or 6 ft) and the picket width, which runs either 5/8 in or 3/4 in depending on the series. The gotcha we see constantly in Fort Lauderdale is older installations where the original contractor used a generic panel from a different manufacturer that happens to look close from the curb. Put a Cambria panel next to it and you’ll notice the picket reveal is tighter, the top rail profile is slightly flatter, and the color match is about 80 percent on a good day.
We always recommend OEM Cambria panels when the rest of the fence is still Camria. Yes, aftermarket equivalents exist and they cost 15 to 20 percent less, but in coastal Florida air the color shift between OEM and aftermarket becomes obvious within two years. If you’re replacing a single damaged section, we’ll tell you straight: mixing sources will be visible. If you’re replacing a full run, aftermarket becomes a reasonable conversation. To identify what you have, look at the back side of any rail for a stamped code starting with “CBR” followed by four digits. No stamp? Send us a photo and we’ll identify it from the profile.
Styles & brands we work with
Signs Your Cambria Fence Installation Is Failing
- Post lean, especially after rain. In Fort Lauderdale’s sandy soil, a post set without enough concrete depth will start to list within three seasons. We dig to a minimum of 24 inches and use a concrete collar at the base, not just a bag dumped in dry.
- Panels pulling free at the rail brackets. The bracket screws backing out usually means movement somewhere else in the panel, and movement means the screws were driven into end grain or plain steel fasteners are rusting. We use stainless fasteners on every Cambria fence we install in Fort Lauderdale, period.
- Color blooming or chalky white residue on the picket faces. This is UV and salt breakdown of the vinyl capstock layer. Cambria’s warranty covers this, but only if the panels were installed to spec. We document every install so warranty claims actually go through.
- A rhythmic clicking or rattling sound when the wind picks up. That’s loose hardware working the pre-drilled holes wider. Leave it and the panel eventually cracks at the hole. Tighten it without addressing the underlying movement and you buy yourself maybe a month.
- Gaps opening at the ground line, especially on the gate side. Fort Lauderdale’s wet-dry cycle causes soil to swell and settle. A properly installed fence absorbs that movement at the post footing, not by the gate hinges pulling out of the frame.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a typical Fort Lauderdale property, a full Cambria fence replacement with new posts and hardware runs $3,500 – $9,000. The lower end covers roughly 80 to 100 linear feet with standard 4 ft panels and straight runs. The upper end reflects longer lots, 6 ft panels, ground that requires deeper post excavation, and gate retrofits. The factors that move your number: total linear feet (this is the biggest one), post replacement versus reusing existing concrete footings, panel height, and whether the old posts were set by someone who believed 12 inches of concrete was enough. It isn’t, not in this soil.
Every Cambria fence job we do in Fort Lauderdale comes with three numbers in writing before we touch anything: materials, labor, and waste removal. No change orders because we hit clay. No surprise “we need a new post digger” line items. The work is covered by our 365-Day Done Right Promise: if anything fails inside a year, we come back and fix it at no charge, and the promise is on the written estimate, not just in a handshake.
DIY or Call Us?
You can absolutely check a few things yourself, and we’ll never talk you out of it. Make sure the post caps are seated, hose down any dirt accumulating at the ground rail, and eyeball the gate for a sag you didn’t notice before. What you shouldn’t do is dig out an old post footing in Fort Lauderdale without knowing what’s under you: irrigation lines, landscape lighting, and cable conduits all run through fence lines here, and a broken PVC line three feet down turns a Saturday project into a Tuesday bill.
Where DIY goes wrong on Cambria fences specifically is the fastener spec. Use standard deck screws and you’ll see rust streaks within a year. Drive them too hard and the vinyl capstock spider-cracks. If you want to tackle a single picket, call us first and we’ll tell you the right fastener for your panel profile over the phone. If you’re looking at a full run or a leaning post, get a written number before you start renting post-hole diggers. Call (754) 551-2922 for a free estimate. Trevor Nash will tell you what you need, what it costs, and then we’ll get it done.
FAQs
A properly installed Cambria fence lasts 20 to 25 years in Fort Lauderdale, with UV exposure and salt air being the two biggest lifespan factors. The panels carry Cambria’s warranty, but only when installed to the manufacturer’s spec, which is exactly how we do it. Call (754) 551-2922 if you’re not sure whether your current fence was installed correctly, we’ll tell you honestly.
Yes, if the post itself is sound. We can reset posts in new concrete, re-secure panels, and bring the gate back to square without tearing out the whole run. If the post is rotted or the panel has cracked at the rail, replacement is the cheaper path. Call (754) 551-2922 and we’ll tell you which direction makes sense after looking at it.
Most Fort Lauderdale fence replacements take two to three days from post removal to final gate adjustment, assuming we’re not waiting on a special-order panel. We carry the common Cambria profiles on the truck, so same-week scheduling is usually realistic. Call (754) 551-2922 for a written timeline with your estimate.
We stock common Cambria panel sizes, post caps, rail brackets, and stainless hardware at our Fort Lauderdale shop. Less common profiles we order directly through Cambria’s distribution network, which typically adds three to five business days. Call (754) 551-2922 with your panel code and we’ll check stock while you’re on the line.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
