







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
We stock and install Toto-compatible kitchen fixtures as part of full and partial kitchen remodels throughout Fort Lauderdale, with most projects landing between $14,000 and $45,000 depending on cabinet line, countertop material, and the scope of work around the Toto components themselves. We can typically assess your existing Toto setup, confirm what’s reusable, and give you a written number within one site visit. What usually brings Fort Lauderdale homeowners to this page is a Toto kitchen faucet or fixture that has started leaking, lost pressure, or failed entirely, often after years of hard water mineral buildup or a cartridge that finally wore out. The good news is this: if the Toto fixture is the only thing failing, you may not need a full remodel at all. If you’re already planning the remodel, integrating new Toto fixtures is straightforward.

We’re an independent remodeling contractor serving Fort Lauderdale, not a Toto dealer or factory rep. That matters because we don’t have a brand agenda. We’ll recommend a Toto replacement where it makes sense, and we’ll tell you plainly when a less expensive aftermarket part will hold up just as well in South Florida conditions.
Which Toto Models This Applies To

Most of what we run into in Fort Lauderdale kitchens falls into two Toto families: the pull-down and pull-out faucet lines in the Aimes, Promenade, and Legato series, and the touchless/sensor models like the TOTO GG and the EcoPower self-generating lines. Each series uses its own cartridge and hose assembly with slightly different thread pitch and length. Here’s the compatibility gotcha worth knowing: a Toto pull-down spray head from a Legato will not seat properly on a Promenade hose, even though both look nearly identical at arm’s length. The quick-connect collar diameters differ by about 2 millimeters, and forcing it damages the O-ring seat. We tell every Fort Lauderdale customer the same thing before ordering a part: check the model number printed on the tag attached to the supply line under the sink, not the name on the faucet body.
For older Toto installations, particularly anything installed before 2015, the original cartridge design used a ceramic disc stack that is genuinely rebuildable. Newer Toto fixtures still use ceramic discs, but the internal housings are press-fit plastic and aren’t meant to be taken apart. In practice, rebuilding the old ones works, and rebuilding the new ones doesn’t. We keep OEM Toto cartridges, hoses, and spray heads on the truck for the most common Fort Lauderdale callouts, along with quality aftermarket equivalents from a supplier we’ve used for years. The aftermarket parts run 30 to 40 percent less and we’ve seen them last just as long. The one thing we won’t do is install a no-name cartridge off a marketplace site. In a humid kitchen with hard water, a cheap rubber seal fails inside six months and the customer blames the remodel, not the $9 part.
Styles & brands we work with







Signs Your Toto Kitchen Remodeling Is Failing
- Dripping from the spout after the water is off. This is almost always the ceramic cartridge. Toto cartridges are durable, but Fort Lauderdale’s hard water leaves calcium deposits that score the ceramic surface over 5 to 8 years of daily use.
- The pull-down hose won’t retract cleanly. The internal weight has either slipped off the hose or the hose itself is binding against the under-sink plumbing. We see this constantly when a previous installer routed the hose too sharply around the shutoff valve.
- Weak or pulsing water flow. Usually a partially clogged aerator or a kinked hose, but on sensor models it can also mean the flow control solenoid is starting to fail. Toto’s sensor faucets draw very little power and the solenoids do wear out, typically around the 6-year mark in Fort Lauderdale’s mineral-heavy water.
- Water pooling at the base of the faucet. The O-ring deck seal has flattened. This isn’t catastrophic, but if left unaddressed in a humid kitchen, water slides under the deck plate and rots the cabinet top. Fort Lauderdale’s ambient humidity means that particleboard absorbs the moisture and doesn’t dry.
- The spray button sticks in spray mode. The diverter inside the spray head has a small spring that corrodes over time. This is a quick head replacement, and it’s the one repair we’d tell a handy homeowner they can handle themselves if they’re comfortable under the sink.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
If your Toto fixture is failing and you want it replaced without touching anything else, expect to pay between $300 and $700 for the part and labor depending on whether we’re swapping a cartridge, a hose, or the entire faucet assembly. That’s typically a two-hour job with a written guarantee on the work. If the fixture replacement is part of a larger kitchen remodel in Fort Lauderdale, the Toto plumbing work folds into the overall project range of $14,000 to $45,000. What drives that number up or down isn’t the Toto hardware itself, which is a few hundred dollars, but the surrounding work: cabinet line, countertop square footage, whether we’re moving plumbing rough-ins, and the condition of the existing sink base.
Every estimate we write in Fort Lauderdale includes the parts, the labor, and the cleanup. You get the number before we start, and that number does not change at the door unless you change the scope. Our 365-Day Done Right Promise applies to every faucet, cartridge, and fixture we install. If it drips, cracks, or fails inside a year, we come back and fix it on our dime, no service fee.

DIY or Call Us?
Replacing a Toto spray head or cleaning a clogged aerator is reasonable DIY work. You can unscrew the old head, thread on a matching replacement, and be done in ten minutes. Changing a cartridge on a newer press-fit Toto is a different story. Getting the retaining nut off usually requires a specialty wrench, and forcing a plastic housing that’s seated with mineral deposits cracks the body faster than most people expect. If you’re dealing with a sensor model, stop there. The electrical connection under the counter runs to a control box that’s mounted out of sight, and shorting it means replacing the whole unit. Trevor Nash has pulled too many cracked faucet bodies out of Fort Lauderdale sinks that started as a Saturday afternoon cartridge job. The honest rule: if it unthreads with your fingers or a basic tool, give it a go. If it involves the word “solenoid,” call (754) 551-2922 and let us look at it before you make it worse.
FAQs

A properly maintained Toto faucet typically lasts 8 to 12 years in Fort Lauderdale before the cartridge or hose needs attention, though the hard water in certain neighborhoods like Victoria Park and Rio Vista can shorten that to 6 or 7 years without periodic descaling. The faucet body itself will outlast the internal parts in almost every case. Call (754) 551-2922 if you’re unsure whether yours is worth repairing or replacing.
Yes, and we do it regularly for older Toto models with rebuildable cartridges and for newer models that just need a cartridge, O-ring, or hose swap. We’ll always quote the repair first if it’s viable, because a $300 cartridge replacement beats a $700 faucet swap when the body is still in good shape. If we think a replacement is the smarter money, we’ll say so plainly.
A straightforward cartridge or spray head replacement takes about an hour to ninety minutes once we’re on site. A full faucet swap with new supply lines runs two hours. If it’s part of a larger kitchen remodel, the plumbing work is sequenced into the overall project schedule and typically doesn’t add more than a day to the timeline.
We keep common Toto cartridges, hoses, spray heads, and O-ring kits on the truck, along with compatible aftermarket options we trust. For less common model-specific parts, we source them through our local supply partners and can usually have them in hand within one business day. If you’re calling about a faucet we don’t have parts for, we’ll tell you that in the first conversation, not after we’ve opened the sink.
If your Toto fixture is failing and you want someone in Fort Lauderdale who will give you a real number before touching a wrench, call (754) 551-2922. Tell me what you need, I’ll tell you what it costs, then we’ll get it done. Estimates are free, and the guarantee comes with the work.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.


