Tamko Roofing Nationwide

Tamko Roofing: The Fort Lauderdale Owner’s Guide

If your Tamko roof is leaking, lifting, or showing granule loss after a South Florida storm, we can match the exact Tamko shingle line, underlayment, or flashing detail and install it correctly, usually within a few days of your call. Typical Tamko roof repair in Fort Lauderdale runs $400 – $1,800, while a full Tamko roof replacement on a standard single-family home falls between $8,000 and $20,000 depending on square footage, pitch, and the specific Tamko line you have. Most homeowners discover a Tamko failure the hard way: a water stain on the ceiling after heavy rain, shingle granules collecting in the gutter after a wind event, or a home inspector flagging lifting tabs before a sale. Fort Lauderdale’s humidity, salt air, and afternoon thunderstorms punish roofing materials faster than almost anywhere else in the country, and Tamko products are no exception. The good news is that Tamko’s line is broad enough that the right repair, done with matching materials, can add years to the rest of the roof.

Call (754) 551-2922

Key Takeaways:

• Tamko roof repair in Fort Lauderdale typically costs $400 – $1,800; full replacement $8,000 – $20,000.
• We match your existing Tamko line (Heritage, Elite Glass-Seal, Titan XT, or MetalWorks) so the repair doesn’t look like a patch.
• Fort Lauderdale salt air and UV exposure shorten shingle life by 20 – 30% compared to inland Florida.
• Penhallow Remodeling Fort Lauderdale gives you a written price before work starts and a written guarantee on the repair.

Which Tamko Models This Applies To

Tamko builds several distinct roofing product lines, and the repair path depends on which one is on your Fort Lauderdale home. The most common residential lines we see are Heritage (their architectural asphalt shingle, available in Heritage 30 and Heritage 50 with different wind ratings), Elite Glass-Seal (a three-tab shingle that is now largely retired but still on thousands of older Fort Lauderdale roofs), Titan XT (a heavier architectural shingle with a 130 mph wind rating, popular in hurricane-prone zip codes), and MetalWorks (stone-coated steel shingles, a different animal entirely). There is also Tamko’s TW-60 and TW-80 underlayment lines, which appear on many Fort Lauderdale roofs installed after the 2017 code updates. If you’re not sure which Tamko line you have, check the packaging left behind from the original install, look for a printed label on the underside of a lifted tab, or have us measure the shingle exposure and count the tabs. A Heritage shingle has a different exposure and profile than Titan XT, and installing the wrong one is a cosmetic and functional mismatch. For Tamko specifically, we use OEM material whenever it is available because Tamko’s color blends and granule mixes vary subtly by lot, and a close-but-not-exact aftermarket match shows up as a patch job within a year of sun exposure.

Signs Your Tamko Roofing Is Failing

Here is what we actually see on Fort Lauderdale roofs, and what each symptom tells us:

• Granules in the gutter or at the downspout outlet. Tamko shingles shed granules as the asphalt begins to break down under UV exposure. Heavy granule loss means the shingle’s protective layer is gone and the underlying mat is exposed to moisture. This is the earliest and most reliable warning sign, and it is the one most homeowners ignore.
• Curling or lifting tabs, especially near the roof edges. South Florida’s heat and humidity cause the asphalt to dry and the shingle to curl at the corners. Once a tab lifts more than about a quarter inch, wind-driven rain can get underneath it and work its way to the underlayment. On Tamko Heritage specifically, we see this most often on the west-facing slopes that take the afternoon sun.
• Water stains on the ceiling that appear 12 – 24 hours after heavy rain. This is rarely a single shingle failure. It usually means water has breached the shingle layer, saturated the underlayment, and found a gap at a seam, nail penetration, or flashing transition. By the time you see the ceiling stain, the leak path is established and will recur with every storm.
• Failing flashing at roof-to-wall transitions, chimneys, or pipe penetrations. The shingles may be fine, but the metal or sealant at the transitions has degraded from salt air and thermal cycling. Fort Lauderdale is hard on flashing; we replace more rotted pipe boots and re-seal more wall flashings than we do entire shingle fields.
• Moss, algae, or lifting along the drip edge and rake edges. The constant humidity in Fort Lauderdale, especially on shaded north-facing roofs or under tree canopy, feeds algae growth that holds moisture against the shingle. Once moisture sits on the shingle edge, the adhesive strip loses its grip and the shingle becomes a wind catch.

Replacement Cost & What’s Included

Roof repair on a Tamko roof in Fort Lauderdale runs $400 – $1,800 for typical leaks, flashing repairs, or isolated shingle replacement. A full Tamko tear-off and replacement on a standard Fort Lauderdale home runs $8,000 – $20,000, and the biggest drivers are roof square footage, pitch (anything over a 7/12 starts adding labor cost), the Tamko line you are installing (Heritage is less than Titan XT which is less than MetalWorks), and whether the existing decking needs replacement. Every quote you get from us is a written, line-item number: materials, labor, disposal, and any decking repair, listed separately so you can see exactly what you are paying for. We don’t give verbal ballparks that shift once the old shingles come off. If we open the roof and the decking is rotted, we stop, show you the plywood, and give you a new written price before we go further. The repair and the replacement both carry our 365-Day Done Right Promise in writing. If the repair fails within the guarantee period, we come back and fix it at no charge, and that includes a free second visit with no service call and no re-inspection fee.

DIY or Call Us?

There is a small amount of checking you can safely do from the ground, and that is genuinely useful. Look at your gutters for granules, walk the perimeter with binoculars to spot lifting tabs, and check the attic after a storm for damp insulation or dark streaks on the underside of the decking. What you should not do is get on a Tamko roof in Fort Lauderdale and start pulling shingles. Asphalt shingle roofs here are hot, often algae-slick, and the pitch on most Fort Lauderdale homes is steep enough that a fall is a real possibility. Beyond the safety issue, the practical problem is that a homeowner patch rarely works: you need the correct Tamko color lot, the correct sealant, the correct nail pattern, and the correct underlayment detail, and a single missed step puts the leak right back in the same spot. Trevor Nash has spent the better part of two decades repairing and replacing South Florida roofs, and his policy is simple: tell me what you need, I’ll tell you what it costs, then we’ll get it done. If you are seeing any of the failure signs above, call us at (754) 551-2922 and we will put a background-checked, uniformed technician on the job with a written price before any work starts.