Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Fort Lauderdale Owner’s Guide
Boral roofing replacement in Fort Lauderdale typically runs $800 – $2,500 for a targeted repair and $8,000 – $20,000 for a full roof replacement, depending on whether we’re swapping a section of tile or addressing the underlayment beneath it. We stock Boral-compatible tile, ridge caps, and flashing, and we can usually match your profile within a day or two of inspecting the roof. Most Fort Lauderdale homeowners discover a Boral part has failed the hard way: a dark water stain on the ceiling after an afternoon thunderstorm, or a tile that slid off during a summer squall and landed in the yard.
Here’s the thing about Boral in South Florida. The product itself is solid, it’s a concrete tile that shrugs off sun and salt air better than most. What fails first is almost never the tile. It’s the fasteners, the underlayment, or the flashing around penetrations, because our humidity and rain cycles work on those materials year-round. By the time you see a cracked or missing tile, the water has often already found its way to the deck below. That’s why we don’t just replace the visible part; we inspect what’s underneath it before we quote a number.
Which Boral Models This Applies To
Boral’s concrete tile line includes several profiles you’ll see across Fort Lauderdale roofs: the flat shake, the barrel (also called the mission profile), and the slate-look profiles. The flat and barrel profiles are the most common in Broward County, and they’re not interchangeable. A barrel tile has a curved profile and needs a specific nose-to-pan layout, while a flat tile installs in a shingle-like overlap. If someone hands you a flat tile to replace a barrel tile, it won’t seat properly and water will get behind it.
To identify your Boral part, flip over a loose tile if you can safely reach it. Boral stamps the underside with the profile name and often a manufacturing date code. The profile name is the critical piece. For ridge caps and hip caps, measure the width across the top and the angle of the bend. Boral caps come in standard angles, but the barrel-profile cap is noticeably wider than the flat-profile cap. The third gotcha is color. Boral colors fade slightly over a decade in Florida sun, so a brand-new tile next to a ten-year-old one will show a visible difference. When we match a repair, we order from the same color run when possible, or we’ll pull tiles from a less visible roof slope and install the new ones there.
Aftermarket Boral-compatible tiles from companies like Eagle or Entegra can work in a pinch, but the profile has to be measured precisely. We generally recommend OEM Boral for top-facing repairs where the color and profile are most visible, and we’ll use quality aftermarket only when the homeowner asks us to keep the repair budget tight and the tile is on a low-visibility section like the back slope.
Styles & brands we work with
Signs Your Boral Roofing Is Failing
- Water stains on ceilings or walls after rain. This almost always means the underlayment has a breach. The tile above may look perfectly fine. The leak is usually at a penetration: a vent pipe, a skylight, or the chimney flashing where Boral tile meets a vertical surface.
- Cracked, chipped, or sliding tiles. A single cracked tile from a fallen branch is a simple repair. Tiles sliding out of position in a pattern usually means the fasteners are corroding or the original install used nails instead of the proper tile screws. In Fort Lauderdale’s salt air, that corrosion happens faster than inland.
- Granules or concrete dust in the gutters. Boral tile sheds a small amount of surface material over time, but if you’re finding piles of sandy grit after every rain, the tile is spalling. That’s the concrete breaking down, and it means the tile’s protective surface is failing.
- Missing ridge caps or broken hip lines. Ridge caps are the Boral pieces that sit on the peak. They take the most wind uplift, and in a hurricane or strong thunderstorm they’re the first to go. A missing ridge cap exposes the mortar bed and the fasteners underneath to direct rain.
- Visible dark lines or moss growth along tile overlap lines. In Fort Lauderdale’s wet season, organic growth in the overlap channels means water is lingering there. The tile’s drainage pattern has been compromised, usually by a broken tile above or debris buildup.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Boral roof repair in Fort Lauderdale, you’re looking at $600 – $2,500 installed depending on what we find. A single tile swap at a valley or field area is on the low end. Replacing a section of ridge cap with re-mortaring runs higher. The price jumps when we have to pull back tile to replace underlayment or re-flash a penetration, because that’s real labor and the materials underneath matter more than the tile itself.
Every repair quote from Penhallow Remodeling Fort Lauderdale includes the tile or component cost, the fastener and underlayment materials, labor, and cleanup. It’s a written line-item number, not a range, and the number you approve on day one is the number on the invoice. We don’t do change orders unless you ask us to expand the scope, and we’ll tell you before we touch anything extra. The work carries our 365-Day Done Right Promise in writing: if the repair fails inside a year, we come back and fix it at no charge. No service call fee, no re-inspection fee, no argument.
| Boral Repair Type | Typical Installed Range in Fort Lauderdale |
|---|---|
| Single tile replacement | $400 – $800 |
| Ridge cap repair or re-mortar | $600 – $1,400 |
| Flashing repair at penetration | $500 – $1,200 |
| Underlayment section replacement | $1,200 – $2,500 |
| Full roof replacement (Boral tile) | $8,000 – $20,000 |
DIY or Call Us?
You can safely check a few things from the ground: count missing tiles, note where water stains appear inside, and check if ridge caps look shifted after a storm. What you shouldn’t do is walk a Boral tile roof after repairs. Concrete tile is strong in compression but brittle under point loads, and a misstep cracks tiles you weren’t planning to replace. More importantly, a roof leak is rarely where the stain is. Water travels along the underlayment and shows up feet away from the actual breach.
If you’ve got a water stain, a missing ridge cap, or tile shifting after a storm, call us at (754) 551-2922. We’ll send a background-checked, uniformed technician out to inspect the roof properly, identify the actual source of the problem, and hand you a written price before any work starts. Trevor Nash has been running crews across South Florida long enough to know that a quick roof patch in this climate usually isn’t quick, and it’s never worth doing twice.
FAQs
Boral concrete tile typically lasts 40 to 50 years in Fort Lauderdale, but the underlayment beneath it generally needs replacement every 20 to 25 years. The tile itself is highly durable; the failure point in our climate is almost always the water barrier underneath. Call (754) 551-2922 if you’re seeing leaks on a roof that’s 15 years old or older; the tile may be fine and the underlayment may not be.
Small hairline cracks can sometimes be sealed, but a cracked or spalled Boral tile is usually replaced because the crack allows water to reach the deck below. Replacing one tile is cheaper than repairing water damage inside the home. For an exact diagnosis and a written quote, call (754) 551-2922.
Most single-tile and ridge cap repairs take two to four hours on site once we have the matching tile in hand. Repairs that involve underlayment or flashing work typically take a full day. We’ll give you a defined arrival window and a written scope before the crew starts, so you know exactly what’s happening and when.
We keep common Boral flat and barrel profiles, ridge caps, and flashing on the truck, and we maintain relationships with Boral suppliers in South Florida for less common colors and profiles. If we have to order, we’ll tell you the lead time before we quote the job. Call (754) 551-2922 and tell us what you need; we’ll tell you what it costs, then we’ll get it done.
Penhallow Remodeling Fort Lauderdale is an independent service provider and is not affiliated with Boral. We also stock parts for KraftMaid, Cambria, and Silestone products.
If you’re dealing with a Boral roof problem in Fort Lauderdale, call (754) 551-2922 to schedule your free estimate. A real person answers, and you’ll get a written price before any work begins.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
