Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Roofing: The Fort Lauderdale Owner’s Guide
We stock and install ECO Window Systems-compatible roofing components across Fort Lauderdale, with typical installed pricing running $400 – $1,800 for most repairs and $8,000 – $20,000 if a full roof replacement is what the situation calls for. Most repairs are completed the same day we diagnose the failure. You usually find out something’s wrong the same way every Fort Lauderdale homeowner does: a water stain on the ceiling after a hard afternoon downpour, or a glance up from the driveway that catches a lifted flashing edge where the roof meets the skylight frame.
ECO Window Systems builds their roofing integration components to work as a sealed system, which means the flashing, curb mounts, and sealant channels are sized to that specific product line. That matters more than most people realize when a part fails and an off-the-shelf replacement gets installed that doesn’t quite match the original profile. We’re an independent service provider, not affiliated with ECO Window Systems, but we work with their components regularly enough to know exactly what fits and what doesn’t.
Which ECO Window Systems Models This Applies To
ECO Window Systems roofing components fall into two categories: the skylight and roof-window units themselves, and the mounting hardware that ties them into the roof deck. The compatibility gotcha most homeowners run into is the flashing kit. ECO Window Systems flashing is cut to match the specific glazing frame profile, and a flashing kit from another manufacturer won’t seat correctly against the frame rail. If you’re replacing a cracked flashing on an existing ECO unit, the part number is typically stamped on the underside of the aluminum, and we match it before ordering anything.
How to Identify What You Have
Look for the model label on the interior side of the frame, usually visible when the sash is opened. ECO Window Systems prints the series and size code there, something like a fixed curb-mount or vented deck-mount designation. If the label has faded, we measure the rough opening and the frame depth during the estimate visit so the replacement lands correctly the first time.
The OEM-versus-aftermarket question is straightforward on ECO Window Systems roofing parts. For structural components (flashing, curb mounts, sealant channels), OEM is the right call because the tolerances are tight and the corrosion resistance is matched to the frame alloy. For consumables like sealant beads and weatherstrip, a quality commercial-grade equivalent from a recognized trade brand performs as well and often saves money. We carry both and will tell you which situation you’re in before any invoice is written.
Styles & brands we work with
Signs Your ECO Window Systems Roofing Is Failing
- Water staining in a ring around the interior trim. This usually means the sealant bead between the flashing and the frame has dried and cracked, letting water ride the frame channel. In Fort Lauderdale’s heat, sealant around skylight frames typically loses flexibility within 5 – 7 years.
- Visible corrosion or white powder on the aluminum flashing. Salt air near the coast and west of Federal Highway accelerates oxidation, and once the pitting starts, pinholes in the flashing follow.
- Condensation between the glass panes. The insulating gas has escaped, which means the glazing seal on the ECO unit has failed. The frame and flashing may still be fine, but the unit itself is no longer doing its thermal job.
- A creaking or popping sound from the frame during temperature swings. Thermal movement is normal, but if the curb mount fasteners have loosened, the noise gets sharper and louder. That’s not just annoyance; a loose curb mount shifts the flashing seal.
- Debris building up in the drainage channels. If leaves and pine needles sit in the weep slots, water backs up and finds the next lowest point, which is usually the interior drywall. The channels need to remain clear, and if they’re too narrow for your tree cover, we can discuss adding retrofitted guards.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, an ECO Window Systems-compatible roof repair runs $400 – $1,800 depending on whether we’re replacing just a sealant run ($250 – $500 of that range) or pulling and replacing a full flashing kit ($600 – $1,400). Full roof replacements that include ECO-compatible skylight remounts run $8,000 – $20,000 and are priced by square footage, deck condition, and the number of roof penetrations.
Every quote is written before work starts. The number you get on day one is the number on the invoice. That includes the part, the labor, the disposal, and the written guarantee on the repair. If the repair fails, you call us and we come back at no charge under the 365-Day Done Right Promise. No service call fee, no re-inspection fee, no conversation about whose fault it is.
DIY or Call Us?
You can safely clean the weep channels and visually inspect the flashing from the interior side without touching the roof. That’s about where the do-it-yourself road should end. The reason is simple: the ECO Window Systems sealing system only works when the flashing and the frame are properly seated and torqued, and on a steep South Florida roofline, that’s roofer’s work. If you’re up on a ladder with a caulk gun trying to re-bead flashing on a pitched roof, you’re one wrong reach from a hospital visit.
The middle ground is the smart one. Call us at (754) 551-2922, describe what you’re seeing, and we’ll tell you whether it sounds like a sealant repair we can knock out in an afternoon or a flashing replacement that needs a full assessment. The estimate is free, and the price you get is written down before any tools come off the truck.
FAQs
Plan on 15 – 20 years for the frame and glazing, but 5 – 7 years for the sealant bead under South Florida sun, which is why we recommend an inspection during that window even if nothing looks wrong. Call (754) 551-2922 to schedule one.
A small, localized crack in a sealant bead can be re-beaded, but once the aluminum flashing itself is pitted or creased, patching it is a stopgap that typically fails again within a season. We’ll show you which situation you have before we recommend anything, and the written estimate keeps the decision yours.
Most flashing replacements and sealant repairs are finished in a single visit, typically 2 – 4 hours depending on roof pitch, access, and how many units are involved. A full roof replacement with skylight remounts is a 3 – 5 day project.
We carry the commercial-grade sealants, fasteners, and weatherstripping on the truck. Model-specific flashing kits are ordered by part number once we match your ECO unit, which usually means one quick follow-up visit for installation within the week.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
