Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Roofing: The Fort Lauderdale Owner’s Guide
We stock and install Mr-Glass-compatible roofing components in Fort Lauderdale, with most replacement jobs running $400 to $2,500 installed depending on the part and roof access. If you’ve got a Mr-Glass roof panel, flashing, or fastener system that’s leaking, lifting, or showing rust bloom after a South Florida storm season, we can usually match it and have it sealed the same week. Most owners discover the failure the same way: a water stain creeping across the ceiling two days after a hard rain, or a panel edge flapping when the wind picks up off the Atlantic.
Trevor Nash has seen enough Mr-Glass failures across Fort Lauderdale to know the failure pattern before the ladder goes up. We’re an independent service provider, not affiliated with Mr-Glass, but we’ve worked on enough of their systems to know which parts fail first and which generic substitutions cause problems down the line.
Which Mr-Glass Models This Applies To
Mr-Glass roofing systems in Fort Lauderdale split into two camps: the glass-panel patio or sunroom roofs common on mid-century ranch homes, and the newer polycarbonate or fiberglass panel systems on pool enclosures and carports. The compatibility gotcha worth knowing: Mr-Glass has changed their panel profile twice in the last 20 years, so a 2015 panel won’t always seat into a 1998 frame without an adapter channel. We measure the rib spacing and panel thickness before ordering anything, because guessing wrong means a second trip and a second leak.
For most Fort Lauderdale homeowners, a quality aftermarket panel matched to the Mr-Glass profile performs as well as OEM and costs 20 to 30 percent less. The exception is the flashing and end caps, where the OEM tolerances are tighter and the aftermarket versions tend to pull away in the heat. For those small pieces, we recommend staying with Mr-Glass or a manufacturer that cuts to the exact factory spec.
Styles & brands we work with
Signs Your Mr-Glass Roofing Is Failing
- Water stains on the ceiling or wall below the roof. Usually a failed seam gasket or a panel that’s shifted enough to open a gap. The longer it runs, the more the substrate underneath rots, and rot repairs in Fort Lauderdale humidity move fast.
- Lifting or rattling panels in the wind. Mr-Glass panels rely on edge clips and screws with rubber washers. When the washers split from UV exposure, the panel works loose and wind gets underneath it. That’s how a panel turns into a sail during a summer squall.
- Cloudy, yellowed, or brittle panel sections. Polycarbonate degrades faster in Fort Lauderdale’s UV than it does up north. Once a panel loses its flex, it’s a matter of months before a branch or a ladder bump cracks it through.
- Rust staining along the frame or fasteners. Salt air from the Atlantic accelerates corrosion on Mr-Glass aluminum frames. The rust is cosmetic at first, but the bigger problem is the stainless-to-aluminum contact point failing where the screw threads have stripped out.
- Condensation or fogginess between glass layers. On the older glass Mr-Glass sunroom roofs, a failed seal lets moisture between panes. You can’t dry it out, and the panel’s insulating value is gone. Replacement is the only honest fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, Mr-Glass panel replacement typically runs $400 to $1,800 for a single panel or a small section, with full roof system overhauls landing between $8,000 and $20,000 depending on the square footage and whether the frame needs realignment. Roof repair work follows the same $400 to $1,800 range when it’s a flashing failure or isolated fastener problem. The price driver isn’t usually the panel itself; it’s roof access, the condition of the frame beneath it, and whether we’re sealing one seam or rebuilding the drainage path.
Every quote is a written number before we start, and it includes the part, labor, and disposal of the failed section. We also stand behind the work with our 365-Day Done Right Promise: if the repair fails within that year, we come back and fix it at no charge, no service call fee, no re-inspection charge. That’s in writing on every Mr-Glass job we take in Fort Lauderdale.
DIY or Call Us?
You can safely check the obvious things from the ground: loose panels you can see flapping, missing end caps, visible rust streaks running down the frame, or a panel that’s shifted out of its channel. What you shouldn’t do is get up on a Mr-Glass roof to swap a panel yourself. Glass and polycarbonate roofing panels are slick when damp, they’re not rated for foot traffic, and there’s no safe place to brace a ladder against a curved or sloped sunroom roof. A fall off even a single-story Fort Lauderdale patio roof is a hospital trip or worse.
That’s the honest split. If you can describe what you’re seeing and send us a photo, we can price the repair over the phone and schedule a time that works. Call us at (754) 551-2922 and we’ll walk through what you’re dealing with.
FAQs
Glass Mr-Glass panels can last 25 to 40 years in Fort Lauderdale if the frame stays square and the seals are maintained, but the polycarbonate versions usually give you 12 to 18 years before UV damage and salt air make them brittle. If your panels are clouding or cracking, it’s time to price a replacement. Call (754) 551-2922 for an exact quote.
Small leaks around flashing or edge clips can often be repaired with new gaskets, screws, and sealant, and that’s a $400 to $1,800 fix. A cracked or clouded panel itself can’t be repaired, only replaced. We’ll tell you which one you’re looking at. Call (754) 551-2922 and we’ll give you a straight answer.
A single panel or flashing repair usually takes one visit, typically a few hours once we’re on site and the part is matched. Full section rebuilds can run two to three days depending on the frame condition. We’ll give you a written arrival window before work starts. Call (754) 551-2922 to schedule.
We keep the common fasteners, gaskets, and flashing profiles on the truck for the Mr-Glass systems we see most in Fort Lauderdale, and we order the larger panels to spec once we’ve confirmed the rib spacing and thickness. Most parts arrive within a few days. Call (754) 551-2922 and we’ll confirm availability for your model.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
