Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ViewLux Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
If you own a ViewLux kitchen and something in it has failed, we stock and install ViewLux-compatible kitchen remodeling components throughout Fort Lauderdale, with typical installed work running $14,000 – $45,000 depending on scope. Most owners discover a failed part the hard way: a drawer face that won’t sit flush anymore, a hinge that lets a door droop and scrape the frame, or a pull-out track that binds halfway. You don’t need a full gut renovation to fix it, and you shouldn’t have to buy a whole new cabinet run to replace one failing component.
We’re an independent Fort Lauderdale remodeling company, not affiliated with ViewLux. What we are is familiar with their hardware, their cabinet construction, and the specific ways Florida humidity stresses the moving parts. Our trucks carry common replacement components and we can source the rest quickly. If you’re staring at a sagging drawer or a hinge that’s given up, the fix is usually more affordable than you think.
Which ViewLux Models This Applies To
ViewLux kitchens across their product lines use a mix of European-style hardware and standard American cabinet construction, and the compatibility question comes down to three things: cabinet depth, hinge cup diameter, and drawer slide rating. Most ViewLux cabinet boxes run 24 inches deep with a 35mm hinge cup, which is the industry standard. That’s good news, it means quality aftermarket hinges and slides from brands like Blum or Salice typically drop right in without redrilling.
We also work with KraftMaid, Cambria, and Silestone components on the finishing side, since many Fort Lauderdale homeowners have mixed-brand kitchens. The real compatibility gotcha with ViewLux is drawer slide length. We regularly see slides rated at 18 inches on older ViewLux lines where the drawer box is actually 21 inches, which means the drawer never opens fully, and the owner assumes the track is broken when really it’s the wrong spec. Measure the full extension of the slide, not just the drawer front, before you order anything. In Fort Lauderdale’s salt air, we lean toward stainless or polymer-coated hardware over bare steel, it lasts years longer within a few miles of the coast.
Styles & brands we work with
Signs Your ViewLux Kitchen Remodeling Is Failing
- Door won’t stay closed or won’t close flush. Usually the hinge spring has lost tension or the hinge cup plate has pulled away from the cabinet box. The door may look warped, but it’s often just a tired hinge holding it at a bad angle.
- Drawer scrapes or binds halfway out. That’s the slide bearing or ball track failing. In Fort Lauderdale humidity, old grease thins out and combined with dust becomes a gritty paste that eats the nylon rollers.
- Soft-close stops working, door slams. The dampener piston inside the hinge has blown its seal. This is one of the most common failures we see on ViewLux kitchens that have been through a few humid summers near the water.
- Pull-out shelf or trash drawer wobbles and drops. The undermount rail has bent or the mounting clips broke away from the base. Water exposure from a leaky sink is usually the culprit.
- Cabinet frame separating at one corner. That’s a structural issue, not a hardware swap. It means the box itself has been racking, often from a floor that settled or a countertop that was reset too tight. This one needs a carpenter, not a screwdriver.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full ViewLux kitchen remodel in Fort Lauderdale typically runs $14,000 – $45,000, while smaller component-focused jobs come in lower: cabinet installation alone runs $4,000 – $13,000, countertop installation $2,000 – $6,500, and backsplash work $800 – $2,500. What drives the range is the size of your kitchen, whether you’re replacing a single run of cabinets or the whole layout, and what countertop material you choose. Cambria quartz runs higher than laminate, but it carries its own lifetime warranty alongside our workmanship guarantee.
Every job with Penhallow Remodeling Fort Lauderdale includes a written price before any work starts. Not a range, not a ballpark, a number you can hold us to. The price covers parts, labor, haul-away of old material, and the 365-Day Done Right Promise: if the work fails inside that window, we come back and fix it at no charge. That’s in writing on every project we do in Fort Lauderdale.
DIY or Call Us?
There’s an honest split here. You can safely check whether a hinge is loose at the mounting screws, whether a drawer slide has visible debris in the track, or whether a door is out of alignment at the hinge adjustment points. Those are inspection steps, not repairs, and they’ll tell you what you’re dealing with. Where DIY goes wrong fast is trying to redrill hinge cups, replace undermount slides without the right jig, or force a cabinet box back into square. That last one can crack the face frame and turn a $200 hardware fix into a $1,500 cabinet replacement.
Kitchen remodeling components under tension, like self-closing hinges and heavy drawer slides, can pinch hard and strip out screw holes when installed wrong. Our background-checked, uniformed technicians do this work every week in Fort Lauderdale, and we carry common ViewLux-compatible parts on the truck. Call (754) 551-2922 and describe what’s failing. We’ll tell you what it costs and when we can get there.
FAQs
In Fort Lauderdale’s coastal humidity, most ViewLux drawer slides and soft-close hinges last 7 – 12 years before the dampener seals degrade or the bearings wear out. Kitchens within a mile of the ocean tend to hit the shorter end of that range due to salt air corrosion on exposed metal parts. If your kitchen is past the ten-year mark and multiple components are failing, replacing all hinges and slides at once is often cheaper than doing them one at a time. Call (754) 551-2922 for an exact quote on your kitchen.
A failed soft-close damper can be replaced independently of the hinge in some cases, and a sticky drawer slide can sometimes be cleaned and re-lubricated, but a slide with a broken ball bearing or a hinge with a stripped mounting plate needs full replacement. We’ll inspect it and tell you honestly which path applies to your situation. Call (754) 551-2922 and we’ll walk through what you’re seeing.
A full hinge and slide replacement across a standard Fort Lauderdale kitchen with 20 – 30 doors and drawers takes us one day, sometimes two if the cabinet boxes need repair before the new hardware mounts. A single drawer or single door fix is usually under two hours. You’ll get a defined arrival window and a written price before we start.
Our trucks carry common 35mm soft-close hinges, undermount drawer slides in standard lengths, and mounting hardware compatible with most ViewLux cabinet lines. For less common ViewLux-specific pieces, we source from regional suppliers, typically within a few business days to Fort Lauderdale. You don’t need to pre-order anything, we handle sourcing and confirm the part number and price with you before installing.
If you’ve got a drawer that’s grinding, a door that won’t close square, or a cabinet run that’s showing its age somewhere in Fort Lauderdale, call (754) 551-2922 and tell us what you’re seeing. Trevor Nash and the team will give you a straight answer and a written number before any work begins. Tell me what you need, I’ll tell you what it costs, then we’ll get it done.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
