Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
If you own a home in Fort Lauderdale with Barrette kitchen components and something has failed or is starting to fail, the short answer is this: we source and install Barrette-compatible kitchen remodeling parts throughout Broward County, and a typical Barrette-focused kitchen refresh in this market runs $14,000 to $45,000 installed, depending on cabinet line, countertop material, and how much of the existing layout we’re keeping. Most of our Fort Lauderdale clients discover a Barrette part has failed the same way: a soft-close hinge starts catching, a drawer front shifts out of alignment, or a cabinet door that once closed flush now hangs by a thread after years of coastal humidity doing its quiet work. Trevor Nash has been opening up kitchens across Fort Lauderdale long enough to know that what looks like a small part failure is often the first sign of a larger installation issue underneath.
Key Takeaways
- Barrette kitchen parts are widely compatible, but hinge models and drawer slides vary by cabinet series, so identification matters before ordering.
- In Fort Lauderdale’s salt-air climate, the first failures are almost always metal-on-metal: hinges, slides, and drawer brackets.
- Installed kitchen remodeling in Fort Lauderdale typically runs $14,000 to $45,000, with smaller scopes like backsplash or island work falling in the $800 to $10,000 range.
- Every job gets a written price before work starts and a written 365-Day Done Right Promise behind it.
Which Barrette Models This Applies To
Barrette is a name that shows up most often in Fort Lauderdale homes on cabinet hardware, drawer systems, and trim components. The compatibility question comes down to the cabinet series. Older Barrette lines used a standard 35mm cup hinge with a 1/2-inch overlay, while newer models moved to soft-close mechanisms built into the hinge itself rather than the door bumper. The quick way to identify what you have: open a working cabinet door and look at the hinge body. If there’s a small green or gray plastic clip on the inside, it’s a soft-close series. If the hinge is stamped with only a size and no clip, it’s the standard series and you’ll want to stay within that line for a clean match.
On drawers, Barrette commonly paired with side-mount slides in 16, 18, and 20-inch lengths. The compatibility gotcha: the length is measured by the slide itself, not the drawer box. A 20-inch slide needs a 22-inch drawer box. Getting that wrong means cutting into the cabinet frame, which is where DIY part swaps in Fort Lauderdale kitchens start multiplying in cost. We stock OEM Barrette hardware where available and use quality aftermarket equivalents from the same trade supply houses when OEM lead times run long. Both come back onto your kitchen under our 365-Day Done Right Promise.
Styles & brands we work with
Signs Your Barrette Kitchen Remodeling Is Failing
Barrette components tend to fail in a predictable order in Fort Lauderdale’s humidity. Here’s what we see most often when we open a cabinet door or a drawer that’s been fighting the homeowner for months:
- Soft-close hinge slams or won’t stay closed. The internal damper has worn out or the spring clip has cracked. This is the single most common Barrette failure we replace in Fort Lauderdale, and it’s usually isolated to the doors that get used multiple times a day.
- Drawer sticks halfway or rides at an angle. The slide bearing has rust or salt buildup from the coastal air, or one side of the slide has detached from the cabinet box. Left alone, this warps the drawer front and eventually cracks the box joints.
- Cabinet door drifts out of alignment. The hinge screw holes in the cabinet frame have stripped. Party damage from an earlier repair, but in older Barrette frames we see it from plain wood fatigue in humid conditions.
- Rough texture or bubbling under the cabinet finish. Moisture has found its way under the laminate or paint. In Fort Lauderdale, this is rarely a cosmetic issue alone; it means the cabinet box has been absorbing humidity for a while and the substrate needs inspection.
- Loose or cracked corner trim on the cabinet face. Barrette trim pieces are often the first to show movement because they’re end-grain cuts. When they split, the cabinet face loses structure and the door starts sagging.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, a full Barrette-compatible kitchen remodel runs $14,000 to $45,000 installed. A smaller scope, like swapping out failing cabinet doors and drawer fronts while keeping the existing boxes, falls on the lower end of that range. Cabinet installation alone runs $4,000 to $13,000, countertop installation $2,000 to $6,500, and a new kitchen island $3,000 to $10,000. Backsplash work is the most accessible at $800 to $2,500.
What pushes a Barrette kitchen job up or down in Fort Lauderdale comes down to four things: how much of the existing layout we’re changing, whether the cabinet boxes are salvageable, what countertop material you choose, and whether plumbing or electrical rough-ins need moving. We don’t hand out a verbal range and cross our fingers. You get a written price before any work starts, and that number is the number on the invoice. The warranty is written too: if any part we install fails inside 365 days, we come back and fix it at no charge. That’s the Kingswell standard Trevor has kept since 2004.
DIY or Call Us?
There’s real, honest work a Fort Lauderdale homeowner can do here. Adjusting a single soft-close hinge with a Phillips head is straightforward. Tightening a loose drawer slide screw is fine. Checking whether a door is out of alignment because of a stripped screw hole versus a warped frame is a five-minute inspection. None of those put you at risk. What we would not recommend is pulling apart an entire cabinet run, cutting new box panels, or replacing Barrette drawer slides if you’re not certain about the slide length going back in. Get the length wrong and you’re cutting into the cabinet frame, which turns a $200 part swap into a $4,000 cabinet repair. And in older Fort Lauderdale kitchens, we often find that once the cabinet boxes are opened up, the substrate behind them needs remediation before anything can be reattached cleanly. That’s where a trained eye saves you from a cascading repair bill.
If you’re on the fence, call (754) 551-2922 and describe what’s failing. Trevor and the Penhallow team will tell you over the phone whether it’s a job you can handle with a screwdriver or one that’s better left to a background-checked technician in uniform.
FAQs
In Fort Lauderdale’s coastal climate, well-installed Barrette hinges and slides typically last 10 to 15 years, while cabinet boxes can last 20 or more if the substrate was properly sealed and the original installation kept moisture out. Things fail sooner when salt air gets to bare hardware or when a previous contractor used the wrong fasteners for a humid environment. Call (754) 551-2922 and we’ll tell you whether what you’re seeing is normal wear or an installation problem.
Some parts can be repaired in place, like a stripped hinge hole that we can re-drill and dowel, or a drawer slide that just needs re-seating with the right screws. But if the hinge damper is cracked or the slide bearing has salt corrosion, replacement is the honest fix. We’ll give you a straight recommendation on the phone or during a free estimate visit.
A cabinet door and drawer front swap usually takes one week. A full kitchen remodel with new cabinets, countertops, and backsplash in Fort Lauderdale typically runs three to six weeks depending on material lead times and whether the walls need substrate work once we open things up. We’ll put the timeline in writing alongside the price and a defined arrival window for every workday. Call (754) 551-2922 for a project-specific answer.
We stock the most common Barrette hinge sizes, slide lengths, and trim profiles on our service vehicles, which lets us complete a straightforward hardware swap in a single visit for many Fort Lauderdale homes. If your cabinet series is less common or OEM parts are on backorder, we’ll order them and give you an honest arrival date. For an exact quote on the parts your kitchen needs, call (754) 551-2922; estimates are free.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
