Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
Jerith kitchen remodeling in Fort Lauderdale typically runs $14,000 to $45,000 depending on cabinet line, countertop material, layout changes, and the condition underneath what you already have. We handle the full scope: pulling the old kitchen down to the studs when needed, matching new work to what remains, and installing cabinetry, countertops, and fixtures that actually hold up in South Florida humidity. Most homeowners call us because a cabinet hinge stripped out, a drawer glide snapped, or a countertop seam opened up, and they’re not sure whether they’re looking at a repair or the start of a full remodel. We’ll tell you straight, in writing, before anything gets torn out.
Which Jerith Models This Applies To
Jerith cabinetry and kitchen components don’t use a universal parts system the way some big-box lines do. What matters most when matching parts is the year the kitchen was built, the cabinet box dimensions, and the hinge mounting pattern. Older Jerith cabinet lines used face-frame construction with exposed hinges, while their newer frameless lines use concealed cup hinges with a 35mm bore. You can’t swap one for the other without drilling new holes, and in a humid climate like ours, misplaced hinge holes become a moisture entry point faster than you’d think.
OEM Jerith parts are the safest match when they’re available. They’re machined to the same tolerances and finishes. Quality aftermarket equivalents from Blum and Salice work well for hinges and drawer glides, provided you match the overlay and bore pattern exactly. We measure on site before ordering anything, because a quarter-inch difference in overlay changes how the door sits, and you’ll notice it every time you open the cabinet. Penhallow Remodeling is an independent contractor, not affiliated with Jerith, but we work with their cabinetry regularly across Fort Lauderdale homes.
Styles & brands we work with
Signs Your Jerith Kitchen Remodeling Is Failing
- Doors that won’t stay closed or aligned: This usually means the hinge screws have stripped out of the particleboard stile. In Fort Lauderdale’s humidity, particleboard swells and the screw holes lose their grip. The door isn’t just annoying; it’s slowly pulling itself apart.
- Drawers that stick or drop on one side: The glide on that side has likely bent or the nylon wheel has worn flat. Once one side drops, the drawer rides crooked and every open-close cycle makes it worse.
- Countertop seams opening or discoloring near the sink: Water got under the seam or into the substrate underneath. In older Fort Lauderdale kitchens, that substrate is often particleboard, and once it swells, the countertop can’t sit flat again without replacing the support layer.
- Soft-close mechanisms that slam: The damper inside the hinge or glide has failed. These are replaceable as individual units, but you need to match the brand and clip style, not just the size.
- Visible rust on hinges or handles: Coastal air in Fort Lauderdale accelerates corrosion on any exposed metal. Once pitting starts, the finish is compromised and the part will keep degrading even with cleaning.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Jerith kitchen remodel in Fort Lauderdale runs $14,000 to $45,000. The big drivers are cabinet line, countertop material, and whether we’re changing the footprint. KraftMaid and Wellborn cabinets land on the lower-to-mid side; custom builds push higher. Countertops follow the same pattern: laminate starts around $2,000 installed, Cambria or Silestone quartz runs $4,000 to $6,500, and Caesarstone falls in the same range depending on the slab.
Every quote we write includes parts, labor, demolition, disposal, and the written guarantee. The price we put in front of you before work starts is the price on the final invoice. No change orders because we found termite damage and decided it was your problem. If something in the work fails inside 365 days, we come back and fix it at no charge, in writing, every time.
DIY or Call Us?
You can safely check a few things yourself: read the labels inside the cabinet boxes, measure the door overlay, and look for a brand stamp on the hinge or glide. That information helps us quote accurately. What we don’t recommend is attempting to replace cabinet hardware on your own, especially on frameless cabinets where the hinge cup is bored into the door itself. One misaligned bore and you’re replacing the door, not the hinge. Countertop work is firmly in the call-us category, since removing stone without damaging the cabinets underneath takes experience and the right lifting gear.
Trevor Nash walks every Jerith-related kitchen estimate in Fort Lauderdale personally. He grew up in Los Angeles, learned the trade at Los Angeles Trade-Technical College, and has spent the better part of two decades running crews across South Florida. He’s seen what happens when a previous contractor used the wrong fasteners in this humidity, and he’ll tell you plainly what needs replacing and what can be saved. Call (754) 551-2922 and ask for a written estimate. Tell me what you need, I’ll tell you what it costs, then we’ll get it done.
FAQs
In Fort Lauderdale’s humidity and coastal air, Jerith hinges and drawer glides typically last 10 to 15 years before showing wear, while cabinet boxes and doors can last 20 to 30 with proper ventilation. Call (754) 551-2922 for an exact assessment of what’s worth saving and what’s worth replacing. Estimates are free.
Sometimes, yes. A stripped hinge screw can be repaired with a threaded insert or a larger screw, and a misaligned drawer can often be re-leveled. If the metal itself is bent or the damper is shot, replacement is the honest fix. Call (754) 551-2922 and we’ll tell you which one you’re dealing with before you spend a dollar.
A full Jerith kitchen remodel in Fort Lauderdale typically runs 6 to 10 weeks from demo to final walkthrough, depending on cabinet lead times and whether plumbing or electrical moves are involved. We’ll give you a written arrival window for every phase before work starts, not after you’ve been waiting three weeks with no sink. Call (754) 551-2922 for a timeline specific to your project.
We stock common Blum and Salice hinges, drawer glides, and soft-close dampers on our trucks, and we can source OEM Jerith parts for direct matches within a few business days in Fort Lauderdale. If it’s a standard 35mm cup hinge or a full-extension glide, there’s a good chance we can fix it the same day. Call (754) 551-2922 and tell us what you’re seeing.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
