Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Windows & Doors: The Fort Lauderdale Owner’s Guide
ActiveYards window and door replacement in Fort Lauderdale typically runs $4,500 – $15,000 installed, depending on the model line, opening size, and local wind-load requirements. We stock common ActiveYards-compatible hardware, rollers, locks, and weatherstripping on our trucks, and most single-unit swaps are done in a day. Homeowners usually discover a problem the same way: a door suddenly drags on the track, a window won’t stay open, or a latch spins without catching. After a few Florida summers, salt air and humidity find every weak point in a window or door system.
Which ActiveYards Models This Applies To
ActiveYards builds aluminum and vinyl window and door lines in a range of frame depths and glazing options, and the part that fits one series often will not fit another. The models we see most in Fort Lauderdale are the Classic, Professional, and Architect Series sliding doors and single-hung or horizontal slider windows, though older installations along the canals and beachside neighborhoods turn up discontinued profiles. The fastest way to identify your model is the small etched or printed code on the frame corner or the edge of the sash; measure the visible glass, then the frame depth (the distance from the exterior face to the interior face of the profile). That frame depth matters more than the glass size because it determines which roller, lock, and weatherstripping profiles fit. For most ActiveYards hardware, genuine OEM parts are still available through authorized distribution, and we install OEM whenever the original warranty is still active. Where the line is discontinued or OEM lead times stretch to four or six weeks, we use aftermarket equivalents that match the frame profile and load rating. One compatibility gotcha we see regularly: ActiveYards door rollers changed bearing diameter between the 2010-era and current production runs, so a roller that looks identical will sit 1/16 inch low and drag. We carry both.
Styles & brands we work with
Signs Your ActiveYards Windows & Doors Is Failing
- Door drags or grinds on the track. The rollers are worn flat or their bearings have seized from sand and salt grit in the track. You will hear it before you see it, and the door gets harder to move by the week.
- Window sash won’t stay up or closed. The spring balances or block-and-tackle carriers have lost tension. This is a common failure on horizontal sliders after years of dust and humidity.
- You can feel air moving around the closed panel. Weatherstripping has compressed or torn, and the wool pile along the frame has worn down. In Fort Lauderdale, this also means your AC is escaping at the same rate.
- Latches or locks don’t catch, or they catch halfway. Frame settlement or a misaligned strike plate is the usual cause. Forgetting to fix it means the door is closed but not actually secured.
- Condensation or haze between the glass panes. The insulated glass unit’s seal has failed. You cannot repair the seal; the glass unit gets replaced with a new sealed unit.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, replacing a single ActiveYards door panel with new rollers, track adjustments, and a lock typically lands between $800 and $2,200 installed. A full door system swap ranges from $4,500 to $15,000, and full window replacements run $4,500 – $15,000 depending on how many openings and what glazing you choose. The biggest cost drivers are frame size, whether the opening needs hurricane impact-rated glass (a code requirement in many coastal zones), and whether the substrate, the framing around the opening, is rotted and needs repair. We write a line-item price before any work starts, so you will know the part cost, labor, and any permit work separately. Every repair and installation comes with a written workmanship warranty and our 365-Day Done Right Promise: if something fails within the guarantee period, we come back and make it right at no charge.
DIY or Call Us?
For a dragging door or stubborn lock, you can safely clean the track, clear debris from the rollers, and check for loose screws in the handle and strike plate. That solves maybe one in ten cases. What you should not do is pull the door panel off the track by yourself. A sliding glass door panel runs 80 to 120 pounds, and with the wrong lift angle the roller carrier will snap, the panel will drop, and the glass will shatter. Window spring balances are under tension and can release hard enough to break a hand or face. Trevor Nash has handled thousands of these repairs across South Florida, and he will tell you the same thing he tells every homeowner: if the part holds tension or weight, call us. Most calls take one visit, and we arrive with the common ActiveYards hardware on the truck. Call (754) 551-2922 for a free estimate.
FAQs
You can expect 12 to 20 years from an ActiveYards aluminum or vinyl window or door in this climate, though rollers and weatherstripping commonly need replacement every 5 to 7 years because of salt air and sand. Coastal homes within a mile of the beach often see hardware wear at the shorter end of that range. Call (754) 551-2922 for an exact inspection and quote, estimates are free.
Yes, in most cases hardware failures like rollers, locks, balances, and weatherstripping are repairable without replacing the whole unit. The exception is failed insulated glass, which requires replacing the sealed glass unit rather than repairing the seal. We’ll tell you which path costs less before any work begins.
Most single-door or single-window hardware repairs take one to two hours, and many are completed on the first visit because we stock common ActiveYards-compatible parts on our trucks. Full system replacements usually take one day for the install, with any stucco repair or trim work scheduled shortly after. We’ll give you a written window for arrival and a written price before we start.
We keep common ActiveYards rollers, locks, latches, and weatherstripping on our trucks for same-visit repairs, and we can order OEM parts quickly when a warranty is involved. If that line is discontinued, we match aftermarket equivalents to the frame profile and load rating. Call (754) 551-2922 and describe your model, and we’ll tell you what’s in stock before we arrive.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
