Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
A Tremron kitchen remodel in Fort Lauderdale typically runs $14,000 to $45,000 depending on cabinet line, countertop material, and whether you’re moving plumbing or walls. We install Tremron-compatible kitchen components and can usually have a crew out within a week of your written estimate. Most homeowners contact us when a Tremron product has failed or worn out: a cabinet face pulling loose in the humidity, a countertop seam separating, or hardware that simply gave up after years of salt air and daily use.
Here’s what you need to know before you call: we’re an independent Fort Lauderdale remodeling company, not affiliated with Tremron. But we work with Tremron products regularly, we know how they behave in South Florida’s climate, and we’ll give you a written price before any part gets ordered or any cabinet gets pulled.
Which Tremron Models This Applies To
Tremron’s kitchen product line spans several series, and the compatibility question matters more than most homeowners expect. The key gotcha in Fort Lauderdale: Tremron cabinetry manufactured before 2018 used a 32mm European hinge boring pattern, while newer lines shifted to a 35mm cup depth for soft-close hardware. If you’re replacing hinges or drawer slides, that 3mm difference means the wrong part will bind, sag, or strip the mounting screws within weeks. We check the boring pattern before ordering anything.
For countertops, Tremron pairs with quartz and granite fabricators using 2cm and 3cm slab thicknesses. In Florida homes built on slab foundations, 2cm is common on vanity tops but 3cm is the standard for kitchen runs longer than 8 feet. If a seam has separated on an older Tremron top, the fix depends on whether the original installer used polyester or epoxy adhesive. Epoxy holds better in humid Fort Lauderdale air; polyester gets brittle and fails at the seam line. We’ll tell you which one you have before we quote the repair.
The OEM-versus-aftermarket decision for Tremron parts is simpler than most brands: Tremron’s OEM hardware is solid, but their 2015-2019 era soft-close hinges had a plastic damper clip that fails predictably at year six or seven in coastal humidity. Quality aftermarket equivalents from Blum or Salice typically outlast the original by several years. We stock both and will show you the difference in person if you want to see it.
Styles & brands we work with
Signs Your Tremron Kitchen Remodeling Is Failing
- Cabinet doors that won’t stay closed or drift open halfway. This usually means the hinge damper clip has cracked. In Fort Lauderdale’s salt air, the plastic gets brittle faster than inland. One door starts it, then the rest follow within months.
- A countertop seam you can catch with a fingernail. This is the earliest sign of adhesive failure. Left alone in Florida humidity, the seam widens, darkens, and eventually lets water into the substrate below.
- Drawers that stick on humid mornings but slide fine by afternoon. Wood expansion from moisture is the culprit. If your Tremron drawers are made from MDF rather than plywood, the swelling is permanent once the coating wears through.
- Loose cabinet pulls or handles that spin when you tighten them. The threaded insert has stripped out of the door face. Over-tightening makes it worse. We can repair with a steel insert rather than replacing the whole door.
- Discoloration or bubbling at the edge of a sink cutout. Water has breached the seal and is working into the countertop core. This is the one you shouldn’t ignore, because the damage spreads under the surface where you can’t see it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest math for Fort Lauderdale, using the pricing we put in writing before work starts:
- Full kitchen remodel with Tremron-compatible cabinets and new countertops: $14,000 – $45,000 depending on kitchen size, cabinet line, and countertop choice
- Cabinet installation including new Tremron-compatible boxes, doors, and hardware: $4,000 – $13,000
- Countertop installation for a typical Fort Lauderdale kitchen: $2,000 – $6,500
- Backsplash installation tied into existing Tremron cabinetry: $800 – $2,500
- Kitchen island installation or rebuild: $3,000 – $10,000
Every quote includes the part itself, the labor to install it correctly, cleanup, and our 365-Day Done Right Promise in writing. What drives the range most is whether we’re repairing a failing component or replacing the whole kitchen. A hinge swap is a different project than pulling cabinets. We’ll tell you which one you actually need, not which one is more profitable for us.
If a part we install fails within a year, we come back and fix it at no charge. That’s not a verbal promise. It’s on the written guarantee you get with every job.
DIY or Call Us?
You can safely check a few things yourself: find the manufacturer label inside a cabinet door or drawer (it’ll have the Tremron series name and a date code), measure the hinge cup diameter if you’re replacing hinges (32mm or 35mm), and photograph the seam or failure point so you can describe it accurately over the phone.
What you shouldn’t DIY: anything involving cabinet removal near plumbing or electrical runs, countertop seam repair (the adhesives are finicky, and a bad seam repair makes the original problem worse), or hardware replacement on doors that hang on wall cabinets with visible stress at the mounting points. Fort Lauderdale homes built in the 1970s and 80s often have framing quirks that make a “simple” cabinet swap turn into a structural conversation.
If you’re not sure, call us. We’ll ask a few questions, tell you what we think, and give you a written price before we ever walk through your door. That’s (754) 551-2922.
FAQs
Boxes typically last 15-25 years if they’re plywood construction; MDF boxes in humid Fort Lauderdale homes without good ventilation often show swelling at the sink base and dishwasher opening by year 8-10. Hardware like hinges and drawer slides is the short-lived part, usually failing at the 6-8 year mark in coastal air. Call (754) 551-2922 and we’ll tell you honestly whether you need hardware replacement or box replacement.
Yes, if the seam is the only problem and the substrate underneath is dry. We open the seam, clean the old adhesive, re-bond with a marine-grade epoxy, and color-match the fill. If water has already breached the substrate, a patch repair won’t hold, and you’ll need a new top. The free estimate includes the inspection that tells you which situation you’re in.
A hardware swap on 10-15 doors takes one day. A countertop seam repair takes about 4 hours including cure time. A full cabinet replacement runs 3-5 days depending on how much plumbing and electrical work is involved. We’ll give you an arrival window and a completion window in writing before we start.
We stock Tremron-compatible hinges, drawer slides, and mounting plates on our trucks, plus the aftermarket Blum and Salice equivalents we’ve found hold up better in Fort Lauderdale humidity. For larger components like cabinet doors or countertop slabs, we order from our Florida suppliers and typically have them in within 5-10 business days. If you also have KraftMaid, Cambria, or Silestone surfaces or components in your kitchen, we work with those in the same project without skipping a beat.
Tell me what you need, I’ll tell you what it costs, then we’ll get it done. Call (754) 551-2922 to schedule your free estimate in Fort Lauderdale.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
