Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tuff Shed Roofing: The Fort Lauderdale Owner’s Guide
We stock and install Tuff Shed-compatible roofing panels and trim in Fort Lauderdale, with most full roof swaps running $800 – $2,500 installed depending on shed size and material. Most owners call us after noticing water stains on stored items or daylight showing through a seam. The good news: if we confirm the panel dimensions and profile on your first call, we can usually have the right material on the truck and the shed dry again within a day or two. Penhallow Remodeling Fort Lauderdale is an independent service provider, not affiliated with Tuff Shed, but we have worked on enough of their structures across South Florida to know exactly what holds up here and what does not.
Which Tuff Shed Models This Applies To
Tuff Shed builds several lines, and the roofing differs between them. The Premier Series and Pro Series typically use painted steel panels with a specific rib profile, while the Sundance Series and older Garden Series models often shipped with asphalt shingles over plywood decking. The compatibility gotcha we see regularly in Fort Lauderdale: two sheds can look identical from the driveway but have different panel widths, and a mismatched replacement panel will leak at the overlap no matter how much sealant you apply. Before you order anything, look for the manufacturer label inside the door frame or on the underside of a roof panel. If it is gone, measure the full panel width including the rib, not just the flat section. Tuff Shed steel panels for most current models run roughly 36 inches wide with a ¾-inch rib height, but there are enough exceptions that we always measure before ordering. For OEM versus aftermarket: Tuff Shed’s branded panels are no longer available for many discontinued models. In those cases, a quality aftermarket panel in the correct gauge and profile is the better fix, and we can match the color well enough that only you will know the difference. That said, if your shed carries an active warranty, check the terms first. A patch with the wrong part can void coverage on the whole roof.
Styles & brands we work with
Signs Your Tuff Shed Roofing Is Failing
- Water stains on stored items or the shed’s interior walls. This is usually the first sign, and by the time you see it, the panel seam or shingle underlayment has likely been compromised for weeks. In Fort Lauderdale’s wet season, a small seam gap becomes a steady drip fast.
- Daylight visible through the roof from inside. Shut the door, look up, and if you can see sky through a seam or around a screw head, the fastener has backed out or the panel has shifted. That opening will let in every afternoon thunderstorm we get from June through October.
- Rust streaks or bubbling paint along panel edges. Coastal air here is salt-heavy, and Tuff Shed panels that looked fine their first three years can start rusting at the cut edges by year five. Once rust perforates the steel, the panel is done; surface rust can sometimes be treated, but pinholes cannot.
- Screws backing out or missing from the panel surface. Tuff Shed roofs use self-tapping screws with rubber washers, and the rubber dries and cracks in the Florida sun. A screw without a functioning washer is a leak waiting to happen, even if the panel itself is still solid.
- Granules collecting at the base of the shed (shingle roofs). If your Sundance or Garden Series shed has shingles, granule loss means the shingle is past its useful life. Shingle shed roofs in South Florida rarely make it past 12 years, even with good ventilation.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Fort Lauderdale Tuff Sheds, a full steel panel roof replacement typically runs $800 – $2,500 installed. A partial panel or seam repair usually lands between $400 and $1,800, per the standard Roof Repair range we quote across the site. What moves the number: shed size (a 6×8 costs far less than a 12×16), roof pitch (steeper is slower, safer work), steel versus shingle material, whether the underlying framing or decking has rot that needs addressing, and whether we need to remove and dispose of the old roof. Every quote is written, line-itemed, and given to you before any work starts, so the number we hand you on day one is the number on the invoice. The work itself carries our 365-Day Done Right Promise: if a leak returns within a year, we come back and fix it at no charge.
DIY or Call Us?
You can safely check a few things yourself: look for daylight through the seams from inside, inspect screw heads for missing rubber washers, and note where rust is forming. That information helps us quote accurately over the phone. But replacing a Tuff Shed roof panel is not a simple swap. The panels interlock, the fasteners must hit the framing underneath, and working on a pitched shed roof in Fort Lauderdale’s afternoon heat is harder than it looks from the ground. We have corrected more than a few DIY panel swaps where the owner stripped screws into open air and sealed every seam with half a tube of caulk. If the job involves panel removal, a fall from even a 8-foot shed eave is a real injury risk. Let us handle the work at height. Call (754) 551-2922 and we will give you a straight price.
FAQs
A steel Tuff Shed roof in Fort Lauderdale realistically lasts 10 to 15 years before needing panel replacement, and sometimes less if the shed sits fully exposed to salt air near the beach. Shingle sheds run 8 to 12 years. If your shed is over a decade old and showing rust at the edges, price a replacement before the next wet season. Call (754) 551-2922 and we will give you an honest assessment.
It depends on the failure. A single backed-out screw or a small seam gap can usually be repaired with the right fastener and a quality sealant; a panel with rust pinholes or a torn seam needs replacement. We will not sell you a full roof when three screws will fix the problem. Call (754) 551-2922 for a straight answer, not an upsell.
Most Tuff Shed roof replacements in Fort Lauderdale take one day on site. If the underlying framing needs repair, add a second day. We will tell you before we start which scenario applies to your shed, and the written price covers either one.
We keep common steel panel profiles and matching trim on the truck for most Tuff Shed models, and we can source discontinued or odd-size panels within a few days through local Fort Lauderdale suppliers. Alongside Tuff Shed-compatible roofing, we also stock parts for KraftMaid, Cambria, and Silestone product lines. If you call with your shed’s measurements, we will tell you before the visit whether we can fix it same trip or need a follow-up.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
