Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Lauderdale Homeowners Choose Belgard Construction
Penhallow Remodeling Fort Lauderdale provides Belgard in Fort Lauderdale construction service and repair throughout the city, from paver patios and driveways to pool decks and walkways. We’re not a Belgard dealer and we’re not authorized by the manufacturer – we’re an independent Belgard service provider, which means we repair and install these systems based on how they actually perform in South Florida’s salt air, high water table, and daily summer downpours. Most Belgard failures we see aren’t manufacturing defects. They’re installation shortcuts that coastal conditions eventually expose. That’s the difference in our work. Call (754) 551-2922 for a free estimate.
Why Trust Penhallow Remodeling Fort Lauderdale for Your Belgard Construction?
Our crews have rebuilt enough Belgard patios, driveways, and pool decks to know exactly how these products behave when the water table sits three feet down and the afternoon storm drops two inches of rain in forty minutes. We also bring that expertise to Belgard in Hollywood projects with similar coastal conditions. We see the same failure modes repeat: edge restraints sinking because the sand bed washed out, pavers creeping outward, joints packed with ant tunnels. Trevor Nash, owner of Penhallow Remodeling Fort Lauderdale, learned the trade at Los Angeles Trade-Technical College and spent nearly two decades running crews across South Florida before building this team. That experience matters when a Las Olas Isles homeowner asks why their three-year-old patio looks ten years old. We can usually point to the bedding course before we lift the first paver.
Every Belgard job we take gets the same treatment as our full kitchen and bath remodels: a written price before any work starts, a real arrival window, and our 365-Day Done Right Promise in writing. If the work fails inside that year, we come back and fix it at no charge. That’s The Kingswell Way, the standard we’ve operated under since 2004. It applies whether we’re installing a $3,500 paver patio or a $130,000 home addition.
Styles & brands we work with
Common Belgard Construction Problems We Fix in Fort Lauderdale
Here’s what we actually see on Belgard installations in Fort Lauderdale, and why each one happens:
- Paver creep from failed edge restraints. On Belgard Catalina Slate and Dublin Cobble installations, the plastic or aluminum edge restraint is only as strong as the soil holding it. In Fort Lauderdale’s flat, low-lying terrain, heavy rain saturates the sand bed, the restraint loses grip, and pavers start drifting outward within two or three years. The fix is removing the affected border, recompacting the base, and reinstalling with a deeper restraint set into compacted limestone – not just stapling the old one back down.
- Color fading and surface etching from salt spray and pool splash. Belgard surfaces on barrier island properties or around chlorinated pools take a beating that inland installations never see. Salt air oxidizes the surface, and pool splash etches the top layer. We’ve matched and replaced individual Lafitt Rustic Slab units where the color was still in production, but when the line’s discontinued, we’re honest about the limits of patching versus a full overlay.
- Weeds and ant tunnels through sand joints. This is the most common call we get. Regular sand joints hold up fine in dry climates, but Fort Lauderdale’s daily summer rain washes it out and ants move in. We strip the joints, treat the base if necessary, and install polymeric sand that hardens after wetting. It’s not permanent – nothing is in this climate – but it lasts years longer than regular sand.
- Standing water on paver patios. We regularly see Belgard patios that puddle after every afternoon storm because the original installer pitched the surface too flat. Fort Lauderdale’s afternoon downpours aren’t gentle; a quarter-inch drop over eight feet isn’t enough. We often remove and reset the pavers with a corrected slope, or if the sub-base is solid, we regrade and reinstall the same units. You shouldn’t need a squeegee after every storm.
- Sinking sections from washed-out base. When a paver driveway or patio sinks in the middle, the problem is almost never the Belgard units themselves. It’s the base underneath, usually unwashed sand or poorly compacted aggregate. We cut out the affected area, recompact a crushed limestone base, and reset the same pavers. On a Las Olas Isles property, our tech lifted a 200 sq ft Belgard Catalina Slate patio where the original installer used unwashed beach sand as the bedding course. We removed the contaminated sand, recompacted a new crushed limestone base, and reinstalled the same pavers with fresh polymeric sand – six months later the owner reports zero settling after three tropical downpours.
Belgard Parts & Our Repair-vs-Replace Approach
For Belgard pavers, we use OEM replacement units when matching color is critical – extending an existing Catalina Slate patio with mismatched units looks worse than leaving it alone. But for structural repairs, we source equivalent polymeric sand and base aggregate locally to keep costs down. There’s no reason to pay a premium for branded sand when the local crushed limestone from a Fort Lauderdale quarry performs the same or better in our soil.
The repair-versus-replace decision comes down to two things: the condition of the sub-base and whether the Belgard style is still in production. If the base is compromised, patching individual pavers is throwing money at a symptom. If the style is discontinued, matching becomes expensive or impossible. In either case, we recommend a full overlay or rebuild rather than a patch that will fail again in two years. Call (754) 551-2922 and we’ll tell you straight which path makes sense for your situation.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We evaluate the full paver system, not just the visible symptom. That means checking the edge restraints, probing the base depth, and examining drainage patterns. On Belgard Mega-Arbel driveways, we also check for rutting from vehicle weight over a too-thin base.
- 2
Written scope and price. Before any work starts, you get a written price. Not a range. Not a ballpark. The number on day one is the number on the invoice. This is The Kingswell Way, and it’s been our standard since 2004.
- 3
Repair or installation. We remove the affected area, recompact the base, reset or replace the Belgard units, and install the correct joint material. Every job is done by background-checked, uniformed technicians, so you know exactly who’s walking onto your property.
- 4
Testing. After installation, we run water across the surface to verify slope and drainage. We check joint sand depth and edge restraint stability. If anything looks off, we fix it before we call the job done.
- 5
Warranty. Every Belgard project includes our 365-Day Done Right Promise in writing. If the work fails inside that year, we come back and make it right at no charge – no service call fee, no re-inspection fee, no argument.
Belgard Products We Service & Install in Fort Lauderdale
We service and install the Belgard lines most common in Fort Lauderdale: Catalina Slate for large-format patio and walkway installations, Mega-Arbel for driveways that need to carry vehicle weight, Lafitt Rustic Slab for pool decks and modern designs, and Dublin Cobble for traditional driveways and borders. We keep joint materials and base aggregate stocked locally for fast turnaround. For OEM replacement units, we order direct from Belgard distributors, which typically adds a few days to the timeline. For homeowners planning a new paver patio in Fort Lauderdale, we typically recommend Catalina Slate or Lafitt Rustic Slab for their clean lines and consistent color under South Florida sun.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Belgard isn’t the only product line we work with. We install KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures on our kitchen and bath remodels. That matters because paver work often happens alongside a larger project – a pool deck that flows into an outdoor kitchen, or a driveway that complements a new front entry. We handle the whole scope, not just the pavers.
FAQs – Belgard Construction Service in Fort Lauderdale
No. We are an independent Belgard service provider. We’re not a Belgard dealer, and we’re not authorized by the manufacturer. What that means for you: our recommendations are based on what actually works in Fort Lauderdale’s climate, not on a dealership agreement.
Yes, when matching color or texture is critical – extending an existing Belgard patio, for example, or replacing a damaged Lafitt Rustic Slab on a pool deck. For structural components like base aggregate and polymeric sand, we source equivalent local products that perform as well or better in Fort Lauderdale’s soil at a lower cost. We’ll always tell you which parts are OEM and which are equivalent before we install them.
Most paver repairs in Fort Lauderdale take one to three days, depending on the size of the affected area and whether the sub-base needs recompaction. A full paver patio installation of 300 square feet typically runs four to seven days, including base prep, drainage work, and joint sand installation. We’ll give you a written timeframe before work starts – and a real arrival window, not a four-hour “sometime between 8 and 8.”
We service and install Catalina Slate, Mega-Arbel, Lafitt Rustic Slab, and Dublin Cobble. If you have a different Belgard line, call us at (754) 551-2922 – we’ll tell you before you book whether we can source the units and handle the repair.
Repairing or resetting individual Belgard units does not void the manufacturer’s warranty on the units themselves. However, if a previous installer used non-standard base materials and the system fails, Belgard’s warranty typically covers the units, not the installation. Our 365-Day Done Right Promise covers our workmanship in writing, regardless of what the manufacturer does or doesn’t cover.
Because Fort Lauderdale’s water table is high and our summer storms are intense. A standard sand bed that works fine in Arizona or inland Central Florida washes out here within a few seasons. The base needs to be crushed limestone, compacted in lifts, with proper drainage so water moves through and away from the paver system instead of pooling under it. If the base isn’t right, the Belgard units will shift no matter how good they look. Call (754) 551-2922 for an exact quote – estimates are free.
Sometimes. We check with Belgard distributors for remaining stock and look for close matches in current lines. If we can’t get a visual match, we’ll tell you before you spend money. The honest answer might be a full overlay or a deliberate design shift – a border in a contrasting Belgard line, for example – rather than a bad match that draws attention to itself.
Black mold and mildew on pavers is a moisture and shade problem, not a Belgard defect. We clean the surface with the right chemical treatment for paver materials, not bleach, which can etch the surface. Then we address the drainage: if water sits on the pavers after rain, mold will return. That usually means correcting the slope or adding drainage channels. In heavily shaded yards, we might also recommend sealing with a breathable paver sealer that slows regrowth. The fix isn’t just cleaning – it’s keeping the water moving.
If the middle of a Belgard Mega-Arbel driveway has sunk, the failure is in the base, not the units. Repair means cutting out the affected area, recompacting a new base, and resetting the same pavers – usually $4,000 to $8,000 depending on size. Replacement runs $7,000 to $18,000, which is harder to justify if the pavers themselves are in good shape. But if the base is shot across the whole driveway, patching sections will look like patching. We’ll tell you which is smarter for your situation – and the estimate is free. Call (754) 551-2922.
Lafitt Rustic Slab, hands down. The surface texture stays cooler under bare feet than denser lines, and the larger format means fewer joints for ants and weeds to colonize. No paver is fully salt-resistant in Fort Lauderdale’s air, but Lafitt Rustic Slab holds up better than most. For a chlorine-heavy splash zone, we recommend sealing with an appropriate paver sealer and keeping the deck angled at a two-percent slope so water runs off instead of pooling.
Belgard Service Costs in Fort Lauderdale
Here’s what Belgard paver work runs in Fort Lauderdale, based on the projects we’ve priced and completed across the city:
| Service | Fort Lauderdale Price Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
What drives the number up or down: the square footage, the condition of the existing base, access to the site, and whether you’re matching an existing Belgard line or starting fresh. Adding a pool deck or a walkway to a patio project also changes the total. We give you a written price before any work starts, so you’ll know the exact number for your project once we’ve seen the site. Call (754) 551-2922 for a free estimate.
Book Your Belgard Service in Fort Lauderdale, FL
If your Belgard patio is creeping, your driveway has sunk, or your pool deck holds water after every storm, call (754) 551-2922 for our General Contractor services. We’ll send a tech to diagnose the problem, hand you a written price, and if you decide to move forward, we’ll fix it right – under The Kingswell Way standard, backed by our 365-Day Done Right Promise. Tell me what you need, I’ll tell you what it costs – then we’ll get it done.
Written by Trevor Nash, Owner at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale since The Kingswell Way was established in 2004.
