Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
Boral kitchen remodeling in Fort Lauderdale typically runs $14,000 – $45,000 installed, depending on cabinet line, countertop material, and whether we’re doing a full gut or a targeted refresh. Most owners call us because a previous remodel has started to show its age: delaminating cabinet faces, swollen door panels from South Florida humidity, or countertop seams that have opened up. Trevor Nash and our crew have handled Boral-related kitchen work across Fort Lauderdale, from Victoria Park condos with tight footprints to larger homes in Rio Vista and Coral Ridge, so we know how this material behaves within a mile of the ocean.
Which Boral Models This Applies To
Boral is best known in Florida kitchens for two things: their tile backer boards and, more recently, their exterior trim and siding products that sometimes wrap into kitchen bump-outs or breakfast nooks. The compatibility question we hear most often is about Boral’s cement-based backer board under tile floors and backsplashes. If your kitchen has a Boral substrate, the critical thing to match is thickness: 1/4-inch panels are for floors over existing subfloor, 1/2-inch panels are for walls, and using the wrong one is why tile cracks within two years near the joints. For OEM replacements, we source genuine Boral panels and verify the lot stamp; for everything else, we carry quality equivalents from Schluter and HardieBacker that meet or exceed the same moisture ratings. One compatibility gotcha: Boral’s older 3-foot-by-5-foot panel format was discontinued, so if your original install used those dimensions, a modern 3-by-5 replacement changes your seam layout and affects tile alignment. We check the framing before we quote, because in Fort Lauderdale’s humidity, a seam placed wrong is a crack waiting to happen.
Key Takeaways:
- We install Boral-compatible kitchen remodeling from $14,000 – $45,000, written price before work starts.
- Boral substrate thickness must match the original spec or tile failure follows.
- We stock genuine Boral panels and quality equivalents on the truck for same-day substrate swaps during remodel work.
- 365-Day Done Right Promise: if the work fails, we come back and fix it at no charge.
Styles & brands we work with
Signs Your Boral Kitchen Remodeling Is Failing
- Tile cracks running in straight lines between cabinets. This is almost always a substrate problem, not a tile problem. The Boral backer board underneath has shifted, cracked, or was installed with the wrong fastener spacing, and now the tile above it has no stable base.
- Grout keeps pulling away from the tile edges. In Fort Lauderdale, interior humidity swings from air-conditioned dry to wet-season damp. If the substrate wasn’t gapped properly at the seams, expansion pushes the grout out. Re-grouting fixes the symptom; replacing or re-securing the substrate fixes the cause.
- Cabinet doors or drawer fronts have swollen edges or peeling laminate. Boral’s trim and panel products do well outdoors, but inside a humid kitchen, any wood-adjacent product near the dishwasher or sink needs proper sealing. Once the core swells, the door is done and the fix is replacement, not sanding.
- Countertop seams have opened or shifted. If your countertop was set over a Boral substrate that’s moving, the seam will telegraph that movement. A seam that opens more than 1/16 inch means something underneath is no longer flat.
- Base cabinets feel soft at the kickplate or wobble when you lean on the counter. Moisture has worked up from the floor. We’ve opened enough Fort Lauderdale kitchens to know that a tile floor installed without a proper moisture barrier over a slab will eventually transfer that moisture into the cabinet boxes.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full kitchen remodel in Fort Lauderdale runs $14,000 – $45,000. Smaller kitchens or single-wall layouts fall in the $14,000 – $20,000 range, while a full gut with an island, new cabinet layout, and stone counters runs toward the top. What drives the number: cabinet line (KraftMaid and Wellborn are our standard options, and they land differently on price), countertop material (Cambria or Silestone quartz runs $2,000 – $6,500 installed), whether we’re replacing the Boral substrate under the tile, and whether plumbing or electrical moves are involved. Every quote we write includes parts, labor, the substrate work, and disposal. If another contractor gives you a number without opening the walls, that number is a guess. Ours is written before work starts, and it’s the number on the invoice.
DIY or Call Us?
For Boral kitchen remodeling, the honest split is this: you can safely check whether your cabinet doors are swollen, whether your grout is pulling away, and whether your countertop seams have opened. What you should not DIY is anything involving substrate work, tile demolition, or cabinet removal: pulling up tile that’s set over Boral board can release silica dust, and cutting old substrate without knowing what’s behind the wall can put a blade through plumbing or electrical. Trevor Nash grew up in Los Angeles and learned the trade at Los Angeles Trade-Technical College before spending nearly two decades running crews across South Florida, so we have seen every shortcut a previous contractor can take with a substrate in this climate. If you’re wondering whether your kitchen needs a full remodel or a targeted fix, call (754) 551-2922 and describe what you’re seeing; we’ll give you a straight answer and a free estimate.
FAQs
A properly installed Boral-substrate kitchen in Fort Lauderdale should last 15 – 20 years before major work is needed, though the cabinet boxes and countertop materials we install alongside it often last longer. The failure point in this climate is almost always moisture management at the floor and sink base, which is why we verify the barrier situation before quoting. Call (754) 551-2922 for an evaluation, and we’ll tell you what’s actually wearing out versus what’s fine.
Yes, in about half of cases we can replace the affected substrate panels and re-tile a section without touching the rest of the kitchen, and that typically falls in the $3,000 – $8,000 range depending on square footage. If the moisture has spread into the cabinet boxes or the substrate failure runs under the cabinets, a spot repair turns into a bigger job, and we’ll show you exactly why in our written quote. Call (754) 551-2922 for a free estimate so you know which situation you have.
A full kitchen remodel typically takes 3 – 6 weeks from demo to final walkthrough, while a substrate repair with re-tile can be done in 3 – 5 working days. We give you a written arrival window before work starts, and a live person answers our phone 24/7 at (754) 551-2922 if you ever need to ask where things stand.
We stock genuine Boral panels in the common thicknesses and common sizes, plus quality equivalents from Schluter and HardieBacker, and we carry the matching fasteners and seam tape on the truck. If your job requires a specific Boral product we don’t have on hand, we order direct and tell you the lead time before you commit. Call (754) 551-2922 and we’ll confirm availability for your specific kitchen.
Tell me what you need, I’ll tell you what it costs – then we’ll get it done.
Penhallow Remodeling Fort Lauderdale is an independent service provider, not affiliated with Boral. We also install kitchen products from KraftMaid, Cambria, and Silestone.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
