Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
If you’re searching for Cambridge Pavers kitchen remodeling in Fort Lauderdale, you’re likely holding a paver sample, a photo of a cracked paver island facade, or a floor plan that calls for pavers somewhere they don’t traditionally belong. We install and repair Cambridge Pavers-compatible kitchen work in Fort Lauderdale, with full kitchen remodels typically running $14,000 to $45,000 depending on layout, cabinet line, and whether you’re incorporating pavers as an accent wall, island base, flooring, or outdoor kitchen transition. Here’s the reality we see on service calls: Cambridge Pavingstones with ArmorTec are rated for outdoor hardscaping, not interior kitchen floors, and when they end up in a kitchen, the failure usually isn’t the paver itself. It’s the substrate, the setting bed, or the wrong sealant reacting to cooking grease and humidity. This page tells you what actually fails, what it costs to fix in Fort Lauderdale, and how we handle the work.
Which Cambridge Pavers Models This Applies To
Cambridge Pavers has three primary product lines that cross into kitchen work: the Ledgestone series (thin veneer pieces used for accent walls and island faces), the Maytrx and Sherwood paver lines (used for outdoor kitchen floors and patio-to-kitchen transitions), and the RoundTable collection (often chosen for curved outdoor kitchen counters and fire table bases). The compatibility gotcha that surprises Fort Lauderdale homeowners is this: Ledgestone veneer is a thin, lightweight product designed for vertical adhesion, while Maytrx and Sherwood are full-depth pavers meant to sit on a compacted base outdoors. You cannot swap one for the other just because the color matches. Cambridge color codes like Toffee/Onyx Lite, Bluestone, or Slate are consistent across some lines but not all, and the dye lots can shift between manufacturing runs. If you’re trying to match an existing paver, take a photo in daylight, flip a piece over and look for the raised product code on the back, and measure the actual dimensions with a tape measure, not a ruler app. Those three data points tell us in about five minutes whether we can source an exact match or need to blend from the nearest current run.
On OEM versus aftermarket: for Cambridge-specific color runs, OEM is effectively the only way to get a true match. Aftermarket equivalents exist for generic gray or tan bluestone-look pieces, but the color variance in Florida sun means a “close enough” aftermarket paver usually becomes an obvious patch within two seasons of UV exposure. We source Cambridge Pavingstones directly through authorized regional distributors. We also stock KraftMaid and Cambria for the cabinetry and countertop elements that surround paver accents, and Silestone where a homeowner prefers a manufactured quartz surface next to a paver feature.
Styles & brands we work with
Signs Your Cambridge Pavers Kitchen Remodeling Is Failing
- Efflorescence (white chalky haze) that returns after cleaning. This is mineral salt wicking through the paver from trapped moisture, usually because the setting bed was laid over a slab with no drainage plane. In Fort Lauderdale’s humidity, a once-cleaned paver that re-hazes within six weeks means water is moving through the system, not around it.
- Hollow-sounding pavers when tapped, especially near the range or sink. This is a bond failure between the paver and the thinset or mortar beneath. Kitchen heat cycles and under-sink leaks accelerate it. A hollow paver is a cracked paver waiting for a dropped stockpot.
- Grout or joint sand washing into the floor drain. That means the paver joints were sealed with the wrong product or never sealed at all. Grease, tomato sauce, and soap degrade unsealed joints faster than you’d believe, and once the joint material starts moving, the pavers start shifting.
- Lippage (one paver edge sitting visibly higher than its neighbor) near the kitchen entry. This shows up at the transition where the paver floor meets the wood or tile threshold. It’s almost always a substrate that wasn’t leveled before the pavers went down, and it’s a trip hazard first and a cosmetic problem second.
- Sealer peeling in sheets or turning milky white. A solvent-based sealer applied over pavers that weren’t fully cured, or in humidity above the manufacturer’s threshold, does exactly this. Fort Lauderdale’s moisture levels mean we schedule paver sealing work only when the dew point cooperates, which is a scheduling detail most contractors never mention.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
When a Cambridge Pavers kitchen feature fails, the cost depends on scope rather than a single part number. A paver accent wall or island facade repair in Fort Lauderdale typically runs $800 to $2,500, which includes removing the failed veneer, correcting the substrate, and reinstalling with the right adhesive and joint treatment. A paver floor section replacement inside a kitchen runs $1,500 to $4,000 depending on square footage and whether the subfloor needs leveling first. If the pavers are part of a full kitchen remodel, the complete project range is $14,000 to $45,000, with cabinetry, countertops, and the paver element priced as separate line items. We don’t bundle a “paver upgrade” into a single vague number. You get a written price that breaks out materials, labor, substrate prep, and sealing. Every job carries the same two promises: a written price before any work starts, and a 365-Day Done Right Promise that says if the work fails inside a year, we come back and fix it at no charge. That’s not a verbal commitment. It’s printed on the paperwork you sign before the crew arrives.
DIY or Call Us?
Here’s the honest split. Things you can safely check yourself: photograph the affected pavers in daylight, flip a loose piece to read the product code on the back, and note whether the problem appeared after a specific event like a hurricane, a leak, or a new appliance installation. Things you should not attempt: removing and resetting pavers over an unknown substrate, mixing mortar or thinset to “re-stick” a veneer piece, or applying a sealer you picked up at a big-box store. The sealer point matters more than it sounds. A water-based sealer over a solvent-based factory finish creates a chemical bond failure that turns into a milky, peeling mess, and removing it costs three times what sealing it correctly would have. The same applies to anything involving an outdoor kitchen gas line or appliance connection adjacent to paver surfaces. No step-by-step instructions from me there. Turn the gas off and call a licensed professional. For everything else paver-related, call (754) 551-2922 and we’ll look at it in person.
FAQs
A properly installed Cambridge Pavingstone feature should last 25 years or more, and the ArmorTec protective layer is genuinely good at slowing color fade. What shortens that lifespan in Fort Lauderdale kitchens is what’s underneath: a poorly prepped substrate fails in 2 to 5 years and takes the pavers with it. Call (754) 551-2922 and we’ll tell you what you’re actually working with before you spend anything.
A hairline crack in a veneer piece can sometimes be repaired if the substrate is sound and the paver hasn’t shifted, but a full-depth floor paver with a crack through the body is a replacement, not a repair. The repair-versus-replace call depends on whether the crack is cosmetic or structural, and that’s a five-minute inspection. Estimates are free, so call (754) 551-2922 and we’ll look.
A typical paver accent wall or island facade repair takes one day for the tear-out and reset, plus 24 hours of cure time before we apply the sealant and you can use the area normally. A floor section replacement is usually two days. We’ll put the schedule in writing before we start, with a real arrival window, not a “sometime next week.”
We keep common Ledgestone veneer colors and the most-requested Maytrx and Sherwood pavers in our Fort Lauderdale inventory, but Cambridge’s full color catalog runs too deep to stock everything. If we don’t have your exact paver on hand, we source it from a regional Cambridge distributor, usually within three to five business days. We’ll tell you the lead time on day one, in writing.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
