Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Lauderdale Homeowners Choose CWS Construction
We provide independent CWS construction repair and service across Cws in Fort Lauderdale, focusing on the cabinetry, countertops, and shower systems installed in homes from Rio Vista to Coral Ridge. As an independent CWS service provider, we are not authorized by or affiliated with the manufacturer, but our crews work with these products every week, and we carry the replacement parts and materials needed to match existing CWS components or replace them outright. If you have CWS Arcadia cabinets with swollen stiles, a CWS Summit countertop delaminating at the sink, or a CWS Harmony shower pan flexing at the floor, call (754) 551-2922 and we will tell you straight what it costs to fix.
Why Trust Penhallow Remodeling Fort Lauderdale for Your CWS Construction?
Trevor Nash, our owner, learned the trade at Los Angeles Trade-Technical College and has spent the better part of two decades running crews across South Florida. He has seen what Fort Lauderdale humidity does to cabinet boxes, countertop substrates, and shower pans, and he trains every technician to diagnose CWS failures the way a remodeler would: not just patch the symptom, but fix what caused it. When we open a CWS Arcadia base cabinet and find the hinge plates pulling loose from particleboard stiles, we know the real fix is new solid-wood stile stock or complete box replacement, not longer screws that will strip out again in eighteen months.
We use genuine CWS replacement parts when a job calls for matching existing components, like matching cabinet doors or countertop edge profiles. When CWS parts are discontinued, we source aftermarket hinges, glides, and plumbing fixtures that meet the same specifications, and we tell you which parts are going into your home before we install them. Every job gets a written price before any work starts, and every CWS repair carries our 365-Day Done Right Promise in writing. If the fix fails inside a year, we come back and make it right at no charge. That promise is the backbone of how we operate under The Kingswell Way, the standard we have followed since 2004.
Styles & brands we work with
Common CWS Construction Problems We Fix in Fort Lauderdale
Fort Lauderdale’s subtropical climate, with its intense sun, salt air, and daily summer thunderstorms, accelerates certain failures in CWS products that you will not see listed on a manufacturer spec sheet. Here are the five most common problems we walk into:
- CWS Arcadia cabinet hinge plates pulling loose from particleboard stiles. Years of humidity exposure soften the particleboard around the hinge screws, and the plate starts to sag. The door hangs crooked, rubs the frame, or will not close flush. A proper fix means rebuilding the stile with solid wood or replacing the box entirely, not packing the holes with toothpicks and wood glue.
- CWS laminate countertop delamination at the sink cutout. Water sits at the cutout edge, wicks into the substrate, and the laminate separates in a bubbling ring around the sink. This is the classic CWS Summit laminate failure in Fort Lauderdale homes where the original installer skipped sealing the raw cutout edge. A repair means cutting out the damaged section and re-laminating with a properly sealed edge, and if the substrate is too far gone, a full countertop replacement is the honest call.
- CWS Harmony shower pan flex causing grout cracking at the wall-to-floor transition. The pan was set on an uneven subfloor or the mortar bed was too thin, and every step on the shower floor flexes the pan just enough to crack the grout line. Water gets behind the tile, and six months later you have a wet stud cavity. The fix is pulling the pan, leveling the substrate, and resetting it on a full mortar bed, then re-grouting with a flexible, waterproof grout.
- CWS drawer glide brackets bending from overloaded drawers. Homeowners stuff pots, pans, and small appliances into deep base drawers, and the factory glide brackets bend under the weight. The drawer front goes out of alignment, the drawer sticks or falls off the track, and one side rides higher than the other. Replacing the glides with a heavier-gauge aftermarket set rated for the load solves it, and we will tell you if your drawer has been carrying more than it should.
- CWS cabinet door warping on the hinge side. Fort Lauderdale’s humidity swings, especially in older 1950s-1970s ranch homes with concrete block walls and less consistent air conditioning, cause solid-wood CWS cabinet doors to expand and contract unevenly. A door that was true when installed now bows out at the corner. Depending on the warp, we can sometimes correct it by adjusting hinges and adding a warp-reducing catch; other times the door needs replacing and we match the CWS profile exactly.
CWS Parts & Our Repair-vs-Replace Approach
We stock common CWS-compatible hinges, drawer glides, cabinet door profiles, countertop edge trim, and shower pan components locally through CWS Construction in Oakland Park, FL so we are not waiting on a freight shipment from a regional warehouse. Genuine CWS parts are our first choice when a job requires matching an existing CWS cabinet door or countertop edge profile, because anything less will look like a patch job. When CWS has discontinued a line, like older Arcadia cabinet door colors, we source quality aftermarket equivalents that match the face profile and finish closely enough that you will not notice the difference from across the kitchen.
There are times when repairing a failing CWS component costs more per year of remaining life than replacing it. A CWS laminate countertop that has delaminated at two cutouts and bubbled along the backsplash will keep failing as the substrate absorbs more moisture. At that point we recommend replacing the whole run with a CWS Summit quartz or solid surface top, and we give you the repair price and the replacement price side by side so you can decide with real numbers. Call (754) 551-2922 and we will come out, diagnose the problem, and hand you a written line-item quote for whichever path you choose.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We inspect the CWS component in place, pull drawers, check hinge plates, feel for pan flex, and look for water staining or substrate swelling. If we need to open a wall or remove a cabinet toe kick to see what is happening behind the surface, we tell you before we do it. The written diagnosis report includes what we found, what caused it, and what it costs to fix.
- 2
Repair or install. We bring the CWS or CWS-compatible parts, the right adhesives and sealants for Fort Lauderdale’s humidity, and the tools to do the job cleanly. For cabinet repairs, that means solid-wood stile replacement, hinge reboring, and drawer glide alignment. For countertops, that means edge sealing at every cutout before the laminate or solid surface goes down. For showers, that means a properly set pan on a full mortar bed.
- 3
Test. After we finish, we open and close every drawer, hang on every door, run water in the sink, and stand in the shower pan to check for flex. If anything is not right, we fix it before we call the job done. We do not hand you a wet wall and say “give it a week.”
- 4
Written warranty. Every CWS repair and installation carries the 365-Day Done Right Promise in writing. If the fix fails inside a year, we come back and make it right at no charge. No service call fee, no re-inspection fee, no argument. That is the Kingswell Way, and it has been since 2004.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Fort Lauderdale
Our Cws in Hollywood crews have hands-on experience across the CWS product lines you are most likely to have in a South Florida home. We service and install CWS Arcadia cabinetry, including base, wall, and tall pantry cabinets, with matching doors, drawer fronts, and hardware. We install CWS Summit countertops in laminate and quartz, with properly sealed sink cutouts and backsplash integration. We also work on CWS Harmony shower systems, including pan replacement, wall surround repair, and full walk-in shower remodels. Our local stock includes CWS-compatible hinges, glides, edge trim, and shower pan components, so many repairs start the same week we diagnose them.
We Also Service These Brands
CWS is one of many product lines we work with here in Fort Lauderdale. If your kitchen or bath has KraftMaid cabinetry, Cambria or Silestone countertops, or Kohler fixtures, we service those brands too, which matters when a remodel mixes products from different manufacturers and you need one crew that can handle all of them without finger-pointing.
FAQs – CWS Construction Service in Fort Lauderdale
Yes, in most cases we can order or fabricate a CWS Arcadia-compatible door that matches the original face profile, rail width, and finish. If the door color has been discontinued, we source a close match and tell you honestly how close it is before we install it. Call (754) 551-2922 with a photo of your existing door and we will give you a written quote.
Sometimes. If the delamination is confined to the sink cutout and the substrate is still sound, we can cut back the damaged laminate, seal the raw edge, and re-laminate the section. If the bubbling extends across the substrate or the particleboard is soft from repeated soaking, replacement is the honest fix. We will show you both numbers before you decide.
We do. We remove the existing CWS Harmony shower pan, inspect the subfloor, level and seal it, and set a new pan on a full mortar bed. We re-install the existing wall surround if it is still in good shape, and replace the bottom course of tile if we need to. You get a solid, crack-free pan without paying for a full shower rebuild. Call (754) 551-2922 for a free estimate.
Yes. We replace the factory CWS drawer glides with aftermarket soft-close glides that match the same mounting points and weight rating. The drawers close quietly and straight, and we do not touch the cabinet face. This is one of the most common upgrades we do in Fort Lauderdale kitchens that still have their original CWS cabinet boxes.
Fort Lauderdale’s humidity causes the wall framing and the countertop substrate to expand and contract at different rates, and over a year the caulk line can separate and a small gap opens up. The fix is re-caulking with a flexible, high-moisture sealant, and if the gap is wide enough that the countertop has shifted, we will check the cabinet leveling and shim the boxes if needed. Call (754) 551-2922 and we will tell you exactly what is going on.
The answer depends on what you are asking us to do. Here are the most common CWS line items we quote in Fort Lauderdale:
| CWS Service | Line-Item Price Range |
|---|---|
| CWS cabinet replacement (per linear foot, installed) | $200 – $500 |
| CWS Summit quartz countertop installation | $2000 – $6500 |
| CWS Arcadia cabinet door match and install (per door) | $150 – $400 |
| CWS Harmony shower pan replacement | $1200 – $3500 |
| CWS drawer glide upgrade to soft-close (per drawer) | $45 – $110 |
For a full kitchen remodel that includes CWS cabinets, CWS countertops, and a CWS shower system in the adjacent bath, General Contractor services in Fort Lauderdale typically run $14,000 – $45,000 depending on layout, cabinet count, and countertop material. We give you a written line-item quote before any work starts, and the number on day one is the number on the invoice. Call (754) 551-2922 to schedule a free estimate.
Book Your CWS Service in Fort Lauderdale, FL
Tell me what you need, I’ll tell you what it costs – then we’ll get it done. Call (754) 551-2922 for a free CWS service estimate in Fort Lauderdale, and we will come out, look at what you have, and hand you a written number before any work begins.
Written by Trevor Nash, Owner at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale since our founding under the Kingswell standard.
