Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Fence Installation: The Fort Lauderdale Owner’s Guide
ES Windows-compatible fence installation in Fort Lauderdale typically runs $3,500 – $9,000 installed, depending on the fence line length, post anchoring method, and whether we’re replacing an existing frame or starting fresh. Most owners discover the part has failed when a panel starts rattling in the afternoon seabreeze or a gate stops latching square, and by then the salt air has usually done more damage than a quick fix can reverse. We stock the common ES Windows fence profiles on the truck and can usually schedule the replacement within the same week we come out for the written estimate.
Before we get into symptoms and pricing, one thing worth saying plainly: Penhallow Remodeling Fort Lauderdale is an independent service provider. We are not affiliated with ES Windows, and we don’t claim to be. What we do claim is that we know the product line well enough to match your failed part correctly the first time, because Trevor Nash and the crew have been pulling apart South Florida window and fence hardware for the better part of two decades.
Which ES Windows Models This Applies To
ES Windows manufactures several fence and gate lines that show up throughout Fort Lauderdale, particularly in the waterfront neighborhoods where aluminum frames meet salt spray every single day. The most common profiles we service are the ES-300 and ES-500 series fence panels, along with the matching swing and slide gate hardware. The compatibility gotcha most homeowners run into is this: the ES-300 uses a 3-inch top rail channel, while the ES-500 steps up to a 4-inch rail, and the fence pickets are not interchangeable between the two. If you order the wrong width rail online, the pickets will not seat, and you’ll be returning a freight shipment.
To identify what you have, look for the small stamped plate on the inside face of the gate post or the lower corner of the first panel. It will list the series number and often the production year. If the plate has corroded away (which happens with older installations within a few blocks of the Intracoastal), measure the top rail width. Three inches means ES-300. Four inches means ES-500. For OEM replacement parts, ES Windows uses a proprietary powder-coat color called “Coastal White” that is hard to match with aftermarket paint, so we carry their factory finish whenever possible. Quality aftermarket equivalents exist for non-visible components like post anchors and hinge bushings, and on those we have no hesitation using them. On the visible rails and pickets, we stick with the ES finish so the repaired section doesn’t read as a patch.
Styles & brands we work with
Signs Your ES Windows Fence Installation Is Failing
- Panel rattle in wind. The aluminum pickets are held into the top and bottom rails with rubber spline seals, and after enough UV exposure those splines shrink and crack. Once they let go, every gust moves the picket and that’s the rattling you hear from the porch.
- Gate dragging or not latching. In Fort Lauderdale, the culprit is almost always the bottom hinge bushing. Salt air eats the nylon bushing, the gate drops a quarter inch, and the latch no longer lines up with the striker plate. Forcing it closed bends the latch arm, which turns a $30 bushing job into a rail replacement.
- White chalky residue on the frame. This is the powder coat oxidizing, a condition called filiform corrosion. It starts as a cosmetic issue but once the aluminum underneath is exposed to coastal air, pitting begins and the structural integrity of the rail follows within a few years.
- Loose posts that wobble at the base. ES posts are set into concrete footers, and the failure we see most often is from an original installer who used dry-pack concrete in a hole that held standing water. The post base corrodes inside the footer, and the wobble you feel is the post moving inside its own anchor.
- Gate opens on its own or swings in the wind. The hydraulic closer or spring hinge has lost its charge. It’s not a structural failure, but an unlatched gate in a storm gust will snap the frame at the hinge side, and that failure is not worth risking for a part that costs under $80.
Replacement Cost & What’s Included
For a standard 20 to 25-foot ES Windows fence run in Fort Lauderdale, installed replacement pricing runs $3,500 – $9,000. The spread comes down to three things: the series you have (the ES-500 materials run roughly 15 to 20 percent higher than the ES-300), the post count and footer condition, and whether the existing frame is salvageable or the powder coat has oxidized to the point where patching it just delays the next failure. We write the price as a single number before any work starts, and that number includes the parts, the labor, haul-away of the failed components, and the written 365-Day Done Right Promise on the entire job.
Everything gets itemized in the written quote, so you’ll see exactly what the ES Windows parts cost and exactly what the labor costs. We don’t pad the parts line and we don’t hide setup fees. The day-one price is the invoice price, and if something we touched fails inside that 365-day window, we come back and make it right at no charge. That includes a free second visit, with no service call and no re-inspection fee.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There are a few things you can safely check yourself before you call us. Look at the hinge bushings on the gate. If you see cracked nylon or exposed metal, that’s a diagnosis you can trust. You can also measure the top rail to confirm which ES series you own. What we’d tell you to avoid is attempting to reset a post or replace a tensioned gate closer without help. A gate closer under load holds enough force to take a finger off if it releases wrong, and lifting a failed post out of a corroded footer by hand is how shoulders get injured and adjacent panels get bent.
For everything else, call (754) 551-2922 and we’ll come out, confirm what you have, and hand you a written number with no obligation. You’ll know the price before you decide, and you’ll know exactly what parts are going in.
FAQs
With proper installation and the OEM Coastal White finish, an ES Windows fence line in Fort Lauderdale should last 15 to 20 years before the rails need replacement, but homes within a half mile of salt water often see hinge bushings and closer hardware fail in the 5 to 7 year range regardless of the finish. Call (754) 551-2922 for an on-site evaluation of how your specific location is wearing the hardware.
A single failed post or hinge can be repaired without replacing the run, but once the top rail shows visible filiform corrosion or more than two pickets are loose in the spline, the repair stops making financial sense and the cost of a new section is close to the cost of repeated patch work.
A standard single-side fence replacement runs two to three working days, with the first day going to post extraction and footer prep, the second to frame and panel installation, and the third to gate hardware, adjustment, and cleanup. Call (754) 551-2922 for a written schedule specific to your property.
We stock the common ES-300 and ES-500 rails, pickets, hinge bushings, latch sets, and closer hardware on the service truck, and we order factory-finished Coastal White components directly from ES Windows for the less common profiles, which usually arrive within three to five business days.
Get a Written Price for Your ES Windows Fence Repair in Fort Lauderdale
If your ES Windows fence is rattling, dragging, or showing chalky corrosion, the fastest way to a real number is a phone call. Tell me what you need, I’ll tell you what it costs, then we’ll get it done. Call (754) 551-2922 and we’ll set a time that works for you, show up on schedule, and hand you a written quote before any work starts. We also carry parts for KraftMaid, Cambria, and Silestone products, but if your fence is the problem, that’s where we’ll start.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
