Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Lauderdale Homeowners Choose KraftMaid Construction
Penhallow Remodeling Fort Lauderdale provides independent Kraftmaid in Fort Lauderdale construction, installation, refacing, and repair service across Fort Lauderdale and its coastal neighborhoods. We’re not a KraftMaid factory service center or an authorized dealer, and we won’t claim to be. What we are is a local general contractor that has pulled, measured, rehung, and refaced enough KraftMaid cabinetry in this salt-and-humidity climate to know exactly which door lines swell, which hinge finishes corrode first, and what a fair repair bill should look like before we touch a single cabinet. Call (754) 551-2922 and you’ll get a real person who can talk KraftMaid specifics without putting you on hold.
KraftMaid is one of the largest cabinet manufacturers in the country, and its Vantage, Momentum, Bainbridge, and Breckenridge lines show up in a huge share of mid-century and 1980s-2000s kitchens across Rio Vista, Victoria Park, Coral Ridge, and Las Olas Isles. We also handle Kraftmaid in Hollywood and nearby areas. We service all of them, entry-level to custom-order, with no manufacturer ties and no pressure to replace what can honestly be repaired.
Why Trust Penhallow Remodeling Fort Lauderdale for Your KraftMaid Construction?
The difference between a contractor who “works on KraftMaid sometimes” and one who actually knows the product shows up in the details. Our crews in Fort Lauderdale and KraftMaid Construction in Oakland Park, FL understand that KraftMaid’s thermofoil doors (used heavily in the Momentum line) react differently to South Florida sun than the wood-veneer doors on Vantage or the painted finishes on Bainbridge and Breckenridge. We know which hinge and glide generations KraftMaid used in which production years, and we know that a 2012-era Momentum soft-close glide is not a direct swap for the 2018 version without a mounting-plate adjustment. That’s the kind of thing that turns a two-hour hinge job into a two-day headache if you don’t catch it early.
Trevor Nash, owner of Penhallow Remodeling Fort Lauderdale, grew up in Los Angeles and trained at Los Angeles Trade-Technical College before spending the better part of two decades swinging a hammer and running crews across South Florida. He’s handled everything from full gut-renovations near Las Olas Boulevard to modest bathroom updates for longtime Fort Lauderdale homeowners. Trevor’s approach on KraftMaid work is the same as on every other job: a written scope and a written price before work starts, and a 365-Day Done Right Promise that’s in writing, not a handshake. Tell me what you need, I’ll tell you what it costs, then we’ll get it done. That’s the whole pitch, and it’s never changed.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in Fort Lauderdale
Fort Lauderdale’s climate does not treat cabinetry gently. Salt air, 90% humidity from May through October, and relentless UV exposure work on KraftMaid cabinet boxes, doors, and hardware in ways you don’t see in drier climates. These are the five issues we walk into most often.
- Warped or swollen cabinet boxes and doors. KraftMaid’s particleboard and MDF core boxes absorb moisture from the air, and in an unventilated Fort Lauderdale kitchen, that absorption never really stops. We see cabinet boxes that have swollen so far out of square that doors won’t close, especially in older Vantage kitchens with original side panels against exterior walls. The fix starts with finding the moisture source – a dishwasher steam leak, an unsealed window, or just decades of ambient humidity – then replacing damaged boxes with matching KraftMaid components.
- Dull, hazy thermofoil doors on Momentum cabinets. Momentum’s thermofoil door fronts are basically a vinyl layer heat-bonded over MDF. Intense sun and salt air eventually break down that vinyl bond, leaving a foggy, streaked finish that no amount of cleaning fixes. This shows up most in east-facing kitchens where morning sun hits the cabinets directly. Replacing thermofoil doors with a painted or veneer option from the same size profile is often the smartest move, and we’ll give you that number alongside the cost of living with the haze.
- Loose or corroded hinges and drawer glides. Salt-laden moisture in coastal Fort Lauderdale strips the plating off hinges and accelerates rust on glides and screws. The result is cabinet doors that sag, drawers that drag, and hardware that looks ten years older than the cabinets around it. We source KraftMaid-specific replacement hinges and glides wherever the original parts are still available, and we match aftermarket equivalents when they aren’t.
- Peeling laminate edges on base cabinets near water. The base cabinet beside the sink or dishwasher takes a beating. A small, slow leak that nobody noticed for months wicks up through the toe kick and delaminates the cabinet’s edge banding. By the time a homeowner sees it, the box itself is often compromised. We repair what’s structurally sound and replace what isn’t, and we always check the plumbing connection behind it so the new cabinet doesn’t meet the same fate.
- Soft-close mechanisms that stopped being soft. KraftMaid’s soft-close hinges and drawer glides use small hydraulic dampers that wear out and eventually fail, leaving drawers that slam and doors that close with a thud. It’s a five-minute job to swap a hinge on a current-model cabinet. On older Vantage or Breckenridge cabinets, the original damper may be discontinued, and that’s where aftermarket replacements properly matched to the spec keep the repair affordable.
KraftMaid Parts & Our Repair-vs-Replace Approach
We use genuine KraftMaid parts when they’re available and the right call. KraftMaid has built its cabinetry on a fairly standardized hinge and glide platform for the last 15-plus years, which means a current soft-close hinge often fits an older cabinet box without modification. For discontinued door styles – Bainbridge and Breckenridge go through more frequent color and profile changes than Vantage – we source high-grade aftermarket reproductions matched for grain, sheen, and color. In both cases, you’ll know before we order anything whether we’re using OEM KraftMaid components or a matched aftermarket part, and what each one costs.
On structural damage – a swollen box, a cracked face frame, a delaminated panel – we run an honest repair-versus-replace comparison before starting work. Some jobs make obvious sense to repair. A full kitchen of cabinets with one failed box and otherwise solid bones is a repair job. A kitchen where half the lower cabinets have water damage and the door finishes are shot is usually a reface or replace decision. We’ll put the numbers side by side and let you decide. Call (754) 551-2922 for a written line-item quote.
Our KraftMaid Service Process – Step by Step
We keep the process simple because our clients have mostly been through the opposite. Here’s how KraftMaid work runs with Penhallow Remodeling Fort Lauderdale.
- 1
Diagnosis. We inspect the cabinets, doors, hinges, and boxes, identify the KraftMaid line and production era when we can, and figure out what failed and why. In Fort Lauderdale, we always check for the moisture source behind a warped box or peeling edge before recommending any fix – otherwise we’re just treating the symptom.
- 2
Written price and scope. Before any work starts, you get a written number that covers parts and labor, with no ballpark language. If we’re matching a discontinued Bainbridge door, the match process is described in the scope, not a surprise later.
- 3
Repair, refacing, or install. Our uniformed, background-checked crew does the work – whether it’s replacing a single Vantage cabinet box, refacing a full kitchen in Breckenridge doors, or installing new KraftMaid cabinetry and a kitchen island.
- 4
Testing and adjustment. Every door, drawer, and glide gets cycled and adjusted. Soft-close mechanisms get checked under real use, not just a showroom tap.
- 5
365-Day Done Right Promise. Every job carries our written guarantee: if the work fails inside a year, we come back and fix it at no charge. No re-inspection fee, no service call. That’s the Kingswell standard, and it’s been in writing since 2004.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Fort Lauderdale
We service all four current KraftMaid construction lines and most legacy lines still sitting in Fort Lauderdale homes built from the 1980s onward:
- KraftMaid Vantage – the workhorse line, wood veneer doors, framed construction, huge door style selection.
- KraftMaid Momentum – thermofoil and painted door options, frameless and framed configurations, heavy presence in condos and spec builds.
- KraftMaid Bainbridge – mid-tier all-wood construction, painted finishes, frequent color refreshes that cause matching challenges down the road.
- KraftMaid Breckenridge – premium line with deeper door profiles and higher-end finishes, most likely to be worth refacing rather than replacing.
We stock common KraftMaid hinge plates, soft-close dampers, and drawer glide components in our Fort Lauderdale shop for faster turnaround on hinge and glide repairs. Door and box orders typically run through our supplier network, and we’ll give you that lead time in writing before you commit.
We Also Service These Brands
KraftMaid is a major part of what we do, but it’s not the only cabinet or surface brand in Fort Lauderdale kitchens. We regularly install and service Wellborn cabinetry, Cambria and Silestone countertops, and Kohler and Toto fixtures alongside KraftMaid work. That multi-brand experience means we’re matching cabinets to countertops and faucets without tunnel vision.
FAQs – KraftMaid Construction Service in Fort Lauderdale
No. We’re an independent general contractor and KraftMaid service provider, not a factory-authorized service center. That works in your favor in one important way: we have no incentive to push replacement parts or full cabinet swaps that you don’t need. We recommend the repair that makes sense, whether that’s a $40 hinge swap or a full reface.
Yes, when the part is available and the original spec is the right call. KraftMaid’s hinge and glide platforms are fairly standardized, so many current OEM parts fit older cabinets. For discontinued door styles and finishes, we source high-grade aftermarket reproductions matched for grain and color. You’ll know which option we’re quoting before we order anything.
Possibly, but it depends on how much the original finish has shifted. A Bainbridge cabinet exposed to ten years of Fort Lauderdale sun may have faded enough that a brand-new factory door in the same color code looks noticeably different. In that case, we match using a custom finish from an aftermarket door supplier, or we recommend refacing multiple doors on that wall or elevation so the kitchen looks intentional instead of patched. Call (754) 551-2922 and we’ll take a look in person before you spend anything.
Thermofoil peeling can’t be re-bonded once the vinyl separates from the MDF core. The repair is a new door and possibly a new drawer front, not a touch-up job. For Momentum cabinets, we can usually source a matching thermofoil door if the style is still in production; if it’s discontinued, we’ll quote a painted or veneer replacement that coordinates with your existing layout. Either way, you’ll have a written price before we order anything.
It can, if you choose the right material. Thermofoil doors are among the most vulnerable to humidity and UV breakdown. A reface with painted wood veneer or a high-grade laminate door in a matte or satin finish will typically hold up far better in a coastal Fort Lauderdale kitchen with sun exposure. We’ll walk you through the trade-offs for your specific kitchen and orientation before you commit to a reface.
It’s common, but it’s not something you should live with. KraftMaid’s soft-close glides use hydraulic dampers that wear out over ten to fifteen years of daily use, especially in salt air. The fix is usually a straight glide replacement with a matched OEM or equivalent aftermarket part, not a whole cabinet replacement. It’s one of the more affordable repairs we do, and the difference in feel is immediate. Call (754) 551-2922 for a written quote on glide replacement.
We match discontinued KraftMaid cabinets in one of two ways: we source a current KraftMaid line with the same door profile and finish as close as possible, or we have doors and panels custom-made to match your existing color and grain. For an island, we often recommend a complementary door style or color that works as a deliberate design choice rather than a near-miss match. Call (754) 551-2922 to get a written number on both options.
Here are the realistic ranges we see in Fort Lauderdale for KraftMaid work:
| Service | Typical Fort Lauderdale Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
What moves the number from the low end to the high end is the cabinet line (Breckenridge runs higher than Vantage), the number of cabinets, whether you’re refacing or full replacement, and how much structural work is needed around water damage or layout changes. The number we give you is a written line-item quote before work starts, and it’s the number you pay at the end. For an exact quote on your KraftMaid project, call (754) 551-2922.
Book Your KraftMaid Service in Fort Lauderdale, FL
If your KraftMaid cabinets are warped, peeling, sagging, or just tired, call (754) 551-2922. You’ll get a live person, a straight answer, and a written price before any work starts. We serve Fort Lauderdale and the surrounding coastal neighborhoods, and our estimates are always free.
