Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
If you own a kitchen with Mr-Glass components and a part has failed, we stock and install Mr-Glass-compatible kitchen remodeling hardware and surfaces throughout Fort Lauderdale. Most Mr-Glass-related kitchen remodeling work here runs $14,000 – $45,000 for a full kitchen, though a single component repair or replacement typically lands between $800 and $6,500 depending on what failed. Call (754) 551-2922 and we’ll match the part to your model and give you a written price before any work starts.
The way most Fort Lauderdale homeowners discover a Mr-Glass part has failed isn’t dramatic. It’s a cabinet door that won’t close square anymore, a glass panel that’s fogged between the panes, or a countertop edge that’s delaminating near the sink. You open it, you notice it, and then you spend a week wondering whether it’s worth fixing. It usually is, and sooner than later, because humidity in South Florida doesn’t let a small failure stay small.
Which Mr-Glass Models This Applies To
Mr-Glass components in kitchens fall into three general categories: glass cabinet inserts and doors, glass backsplash panels, and glass-topped islands or peninsula surfaces. The compatibility gotcha most owners hit is thickness. Mr-Glass cabinet inserts are typically 3/16″ or 1/4″ tempered glass, and the channel that holds them is cut to a specific depth. If you order a replacement panel at 1/4″ for a frame routed for 3/16″, it won’t seat, and the door won’t close flush.
The second checkable spec is edge profile. Mr-Glass backsplash panels in older Fort Lauderdale kitchens were often cut with a polished flat edge; newer production runs use a beveled edge that catches light differently. They are not interchangeable in the same run of tile. We match edge profile first, then dimensions.
OEM Mr-Glass parts exist for most production models still under warranty or recently out of it. For discontinued lines, a quality aftermarket tempered panel cut to the same thickness, edge profile, and dimensions performs identically, and costs 20 – 30% less. We’ll tell you which route makes sense for your model, and we’ll put that recommendation in writing.
Penhallow Remodeling Fort Lauderdale is an independent service provider. We’re not affiliated with Mr-Glass, but we work with their components regularly and stock common replacement hardware on our trucks.
Styles & brands we work with
Signs Your Mr-Glass Kitchen Remodeling Is Failing
- Fogging between glass panes. The seal between the two panes has failed, and Florida humidity is now inside the unit. This doesn’t resolve on its own, and the moisture will eventually etch the interior glass. Replacement is the fix.
- Cabinet door that scrapes or won’t close. The hinge plate has loosened in its bore, or the door itself has swollen slightly from ambient moisture. If the hinge screw holes are stripped, a larger-diameter hinge plate or wood-fill repair is the standard fix.
- Chipped or starred glass edge. A small impact created a stress point along the tempered edge. Tempered glass can hold for months after starring, but it eventually fractures. This is a safety item, not a cosmetic one.
- Discolored or lifting edge on a glass-topped surface. The adhesive bond between glass and substrate is failing, often from sustained heat or standing water near the sink line. You’ll see a milky border spreading inward from the edge.
- Squealing or grinding hinge on a glass door. The hinge bearing has worn, or the hinge was installed slightly out of plane. Replacing the hinge before it binds saves the glass panel from a stress crack at the mounting point.
Replacement Cost & What’s Included
In Fort Lauderdale, a single Mr-Glass component replacement runs from $800 to $6,500 installed, depending on the part. A replacement tempered glass cabinet insert or single door panel typically lands between $800 and $2,500. A full glass backsplash replacement for a standard Fort Lauderdale kitchen runs $2,500 to $6,500. If the failure is part of a larger kitchen remodel, the full project range is $14,000 – $45,000, driven by cabinet line, countertop material, and whether you’re moving plumbing or electrical.
Every price we give is a written number before we start. That number includes the part, labor, haul-away of the failed component, and a written 365-Day Done Right Promise. If the new part fails inside that year, we come back and fix it at no charge. The price on day one is the price on the invoice.
You can also call us for a free estimate. We’ll come out, identify the exact Mr-Glass part, measure it, and hand you a written quote the same visit. No verbal ballpark that changes later.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely do: note the model number if there’s a label on the cabinet box or the underside of the panel, measure the glass thickness with a caliper or a coin reference, and take a photo of the edge profile. That tells us most of what we need to know before we arrive.
What we’d rather you not do: remove a tempered glass panel that’s starred or cracked. Tempered glass releases a lot of stored energy when it goes, and the shards are small and fast. Same caution applies to anything involving the hinge tension on a heavy glass door. If a spring-loaded hinge lets go while you’re working on it, the panel swings free. That’s a thumb breaker, or worse.
For a single cabinet insert swap where you already have the exact part in hand and the door removes cleanly, a careful homeowner can handle it in an afternoon. For anything involving sealed glass units, cracked panels, or hinge replacement on a heavy door, call (754) 551-2922. The estimate is free, and the repair comes with our 365-day guarantee.
FAQs
In a climate like Fort Lauderdale’s, sealed glass units typically last 10 – 15 years before the seal fails; tempered glass panels themselves last indefinitely unless impacted. Hinges on frequently used doors wear at 7 – 10 years. Humidity and salt air accelerate seal degradation more than anything else. Call (754) 551-2922 and we’ll tell you whether your specific part is at its expected lifespan.
No, not reliably. Once the seal between panes fails and moisture gets inside, the only true fix is replacement of the sealed unit. There are companies that drill and vent fogged glass, but the result in South Florida humidity is temporary, and it voids any remaining warranty. Replacement is the honest answer.
Most single-part replacements take 2 – 4 hours on site. Custom glass panels that need cutting and tempering add 5 – 10 business days for fabrication. We’ll give you a defined arrival window before we come, and we show up in that window.
We stock common Mr-Glass-compatible cabinet hinges, mounting hardware, and some standard panel sizes on our trucks. Custom-sized tempered panels, sealed units, and beveled edges are fabricated to order from a local Fort Lauderdale glass shop, which takes about a week. We’ll tell you which category your part falls into when you call (754) 551-2922.
Get a Written Price Before Any Work Starts
If you’ve got a Mr-Glass part that’s failed, or you’re planning a fuller kitchen remodel in Fort Lauderdale with Mr-Glass components, call (754) 551-2922. Trevor Nash and the Penhallow Remodeling Fort Lauderdale team will identify the part, give you a written price, and stand behind the work with the 365-Day Done Right Promise. Tell me what you need, I’ll tell you what it costs, then we’ll get it done.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
