Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Lauderdale Homeowners Choose Mr-Glass Construction
Mr Glass in Fort Lauderdale shower enclosures and tub-to-shower conversions are some of the most requested finish fixtures in local remodels, and our crews service and install them weekly from Rio Vista to Coral Ridge. We’re an independent Mr-Glass service provider – not a manufacturer-authorized dealer – which means we answer to you, not a corporate warranty office. Our Mr-Glass work comes with the same written price up front and 365-Day Done Right Promise every Penhallow Remodeling Fort Lauderdale project gets. If a Mr-Glass enclosure we install fails inside the guarantee period, we come back and fix it at no charge. Call (754) 551-2922 for a free estimate.
Trevor Nash grew up in Los Angeles, trained at Los Angeles Trade-Technical College, and spent the better part of two decades swinging a hammer and running crews across South Florida before establishing Penhallow Remodeling Fort Lauderdale. His team has handled everything from gut-renovations near Las Olas Boulevard to modest bathroom updates for longtime homeowners who just want the tile done right the first time. So when a Mr-Glass hinge binds or a bypass door jumps its track, the fix gets treated like what it is: a repair that should last, not a callback waiting to happen.
Why Trust Penhallow Remodeling Fort Lauderdale for Your Mr-Glass Construction?
Our crews work on Mr-Glass fixtures inside remodels across Fort Lauderdale, from frameless shower enclosures in waterfront condos to tub-to-shower conversions in mid-century ranch homes. We train specifically on Mr-Glass hardware – enclosure profiles, track systems, glass thickness tolerances – so our finish work lasts through salt-air humidity and hurricane-season pressure swings. A Mr-Glass Frameless Hinge Series door hangs on pivot blocks that seize in ocean air if they’re not set with the right anti-seize compound. A Mr-Glass Semi-Frameless Bypass door runs on roller clips that wear oval inside the top track when the glass weight exceeds the track gauge rated for it. These are the details that separate a repair that holds from one that fails in 14 months.
We stock genuine Mr-Glass seals, rollers, and handle sets where the supply chain allows. When a Mr-Glass profile kit is discontinued – and it happens more often than you’d think on older enclosures – we fabricate or adapt quality aftermarket extrusions that match the original profile. The glass is always tempered, always code-compliant, and always set to the plumb tolerance Mr-Glass frames demand. You get a written line-item quote before a single tool comes out of the truck, and the number on day one is the number on the invoice.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Fort Lauderdale
Fort Lauderdale’s salt air, hard water, and daily summer thunderstorms combine to create failure modes you won’t see in an owner’s manual. Here’s what we actually find on Mr-Glass enclosures in this city:
- Hard-water etching and spot corrosion on clear panels. Within 12 to 18 months near the shore, Mr-Glass clear glass develops a haze that no amount of cleaning removes. That haze is mineral etching – the glass surface itself has been eaten by calcium and salt deposits. The fix is machine polishing for shallow etching or full panel replacement when the etching is deep. We replaced a Mr-Glass Neo-Angle in Harbor Beach last March where the homeowner had tried every descaler on the shelf. The etching was 9 mils deep. New panel.
- Sagging bypass doors on the Semi-Frameless Bypass Shower Door. Mr-Glass roller clips are designed to a specific track gauge. In Fort Lauderdale’s humidity, the clips wear oval inside the top track, the panels drop a quarter-inch, and one day they jump the rail and slam into the frame. We see this most on doors installed in the 2010s when track gauges were narrower. Sometimes new rollers fix it. Sometimes the track itself has to be replaced because the clips chewed the rail.
- Leaking neo-angle hinge seals. The Mr-Glass corner gaskets shrink in the attic-level heat that builds in South Florida bathrooms, especially second-floor bathrooms where the ceiling cavity sits under direct sun. Once the gasket shrinks, water drips onto the curb and wicks behind the tile. We’ve opened walls in Rio Vista where the subfloor behind a Mr-Glass Neo-Angle was so rotted from a leaking hinge seal that the subfloor had to be replaced before the enclosure could be re-set. The seal itself is a $30 part. The water damage isn’t.
- Improperly set panel anchors from original installs. Mr-Glass fixed panels have to be anchored into plumb studs with the right thin-set. When the wall isn’t plumb – common in 1950s and 1960s Fort Lauderdale homes with block walls that shifted over decades – or the original installer over-watered the thin-set, the anchor pulls loose. The panel is fine. The wall is the problem. We re-tap the studs, re-plumb the wall where needed, and set new anchors with marine-grade hardware built for the humidity.
- Seized pivot blocks on Frameless Hinge Series doors. The pivot block on a Mr-Glass Frameless Hinge door is a brass-on-brass or brass-on-steel assembly depending on the model year. In salt air, that assembly corrodes and seizes. The door still opens, but it fights you the whole way, and eventually the hinge screw sockets strip. We pulled a second-floor Las Olas Isles door last fall where the owner had been wrestling it for two years. Re-tapped the wall studs, hung a new panel with the Mr-Glass profile kit, and set the hinges in a marine-grade anti-seize so the next owner never fights a stuck door again.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We source genuine Mr-Glass seals, rollers, and handle sets when they’re available through our supply channels. Genuine parts mean the profiles match the original install, which matters when a 1 millimeter gasket difference is the difference between watertight and dripping. When a Mr-Glass track is discontinued – which happens on enclosures installed before the current production runs – we fabricate or adapt quality aftermarket extrusions that match the original profile. We don’t install a generic extrusion and call it close enough. The extrusion either matches the profile or we tell you the enclosure needs to be re-spec’d.
On Fort Lauderdale remodels, we replace rather than repair any Mr-Glass panel with deep etching or micro-chipped edges. The math is simple: the labor to machine-polish a heavily etched panel in this market often costs more than new tempered glass, and a micro-chip at the edge is a breakage risk the first time someone bumps the panel. We’ll tell you honestly which side of that line your enclosure falls on, and the written quote lets you see the numbers yourself. Call (754) 551-2922 and we’ll come look.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the Mr-Glass enclosure, measure the track gauge, check the plumb of the walls, and test the rollers, hinges, and seals. For a Frameless Hinge Series, we’re checking pivot block wear and glass chip edges. For a Bypass, we’re checking roller clip ovalization and track rail wear. You get a written diagnosis before we quote a fix.
- 2
Repair or install. We either execute the repair with the right Mr-Glass or matching aftermarket parts, or we pull the old enclosure and install the new one. All glass is tempered. All anchors are marine-grade. The work is done to the manufacturer’s profile spec.
- 3
Test. We run water on every seal, open and close every panel through its full range, and check for leaks at the curb, hinge, and track junctions. If it’s a tub-to-shower conversion, we test the drain and overflow before we leave.
- 4
Warranty. Every Mr-Glass repair and install carries the 365-Day Done Right Promise in writing. If the seal fails or the door binds inside the year, we return at no charge. No service call fee, no re-inspection fee. That’s the guarantee, in writing, on every job.
Mr-Glass Products We Service & Install in Fort Lauderdale
We service and install the Mr-Glass Frameless Hinge Series, the Mr-Glass Semi-Frameless Bypass Shower Door, the Mr-Glass Neo-Angle Shower Enclosure, and the Mr-Glass Fixed Panel with Inline Return. The frameless and fixed panel lines are the ones we install most often in Fort Lauderdale remodels, particularly for walk-in showers where the curb is being eliminated entirely. The Neo-Angle works well in the smaller bathrooms of 1950s ranch homes where a square enclosure won’t fit the corner. We stock common Mr-Glass seals, roller clips, and handle sets locally for fast turnaround on repairs.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Penhallow Remodeling Fort Lauderdale works across the full range of finish and fixture brands in a remodel as your trusted General Contractor. Beyond Mr-Glass, our crews regularly install KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and Kohler and Moen plumbing fixtures. That means a tub-to-shower conversion with a Mr-Glass enclosure gets the same standard applied to the subfloor, the tile, and the curb as it does to the glass. We’re not tied to any single manufacturer’s catalog, so the recommendation you hear is the one a real contractor would make for your house.
How Mr-Glass Enclosures Handle Fort Lauderdale’s Salt Air and Humidity
Fort Lauderdale’s subtropical climate – the intense sun, the salt air off the Atlantic, and the daily summer thunderstorms – accelerates corrosion of metal fasteners and hardware on nearly every finish fixture in a home. Mr-Glass enclosures are no exception. The pivot blocks on Frameless Hinge doors are the most vulnerable component. In a standard inland bathroom, a pivot block might last 15 years. In a waterfront condo on Las Olas Isles where the windows are open half the year, that same pivot block can seize in five. The fix is not a different door. It’s the right anti-seize compound on the hinges and a marine-grade anchor set at the wall. Those choices are what keep a Mr-Glass enclosure working long after the manufacturer’s standard install spec has been eaten by the climate.
Hard water is the second Fort Lauderdale-specific factor. The city’s municipal water supply leaves mineral deposits that bond to clear glass far faster than homeowners in non-coastal markets experience. A Mr-Glass clear panel in Fort Lauderdale will begin showing etching within 12 to 18 months near the shore unless a water softener is installed or the glass is squeegeed after every use. That’s a maintenance reality the manufacturer’s generic page won’t tell you. We will, before we install the glass, so you can decide what trade-offs you want to make.
Mr-Glass Enclosure Pricing in Fort Lauderdale
What you’ll pay for Mr-Glass service or a new enclosure in Fort Lauderdale depends on three things: the enclosure type and glass thickness, the condition of the wall behind it, and whether the existing curb and drain are being modified. Here are the market ranges we quote in this city:
| Mr-Glass Service | Typical Fort Lauderdale Price Range |
|---|---|
| Frameless Glass Shower Enclosure | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
The spread comes from glass thickness (3/8″ versus 1/2″ tempered), wall plumb corrections, curb elimination, and whether we’re re-tiling the surrounding walls. A straight enclosure swap in a plumb, modern bathroom runs the lower end. A tub removal with subfloor repair, new drain, and tile work runs the upper end. You’ll get a written number before any work starts, and it won’t change. Call (754) 551-2922 for an exact quote.
FAQs – Mr-Glass Construction Service in Fort Lauderdale
Is Penhallow Remodeling Fort Lauderdale authorized by Mr-Glass?
No. We are an independent Mr-Glass service provider. We are not a factory-authorized dealer or a manufacturer warranty station. What we are is a Fort Lauderdale remodeling company that installs and repairs Mr-Glass enclosures daily, trains on the hardware, and backs our work with our own 365-Day Done Right Promise in writing.
Do you use genuine Mr-Glass/OEM parts?
Yes, when they’re available. We stock genuine Mr-Glass seals, rollers, and handle sets for current production models. When a Mr-Glass track or profile has been discontinued, we fabricate or adapt quality aftermarket extrusions that match the original profile. We’ll tell you which we’re using and why before the work starts.
How long does Mr-Glass service take?
Most Mr-Glass roller and seal repairs in Fort Lauderdale are done in one visit, same day. A full enclosure replacement or tub-to-shower conversion typically takes three to five working days depending on tile work, plumbing changes, and glass lead time. We’ll give you a defined arrival window before we start, and we keep it.
What Mr-Glass models/series do you cover?
We service and install the Mr-Glass Frameless Hinge Series, the Semi-Frameless Bypass Shower Door, the Neo-Angle Shower Enclosure, and the Fixed Panel with Inline Return. If you have a Mr-Glass enclosure that predates those production lines, bring us a photo and the measurements. We can often match the profile and hardware.
Will service void my Mr-Glass warranty?
If your Mr-Glass enclosure is still under the manufacturer’s warranty, we recommend you check the warranty terms before any independent service. Because we are not an authorized Mr-Glass provider, work we perform may affect the manufacturer’s warranty coverage on the affected components. Our own 365-Day Done Right Promise covers the work we do in writing, regardless of the manufacturer’s coverage. Ask us and we’ll walk you through what that means for your specific enclosure.
How much does Mr-Glass construction cost in Fort Lauderdale?
A Mr-Glass frameless shower enclosure in Fort Lauderdale typically runs $4,500 to $12,000 installed. A tub-to-shower conversion with a Mr-Glass enclosure runs $3,500 to $10,000. The number depends on glass thickness, wall plumb, tile scope, and whether we’re replacing a curb or drain. Call (754) 551-2922 for a written line-item quote – estimates are free.
Book Your Mr-Glass Service in Fort Lauderdale, FL
If your Mr-Glass enclosure is etched, leaking, sagging, or seizing, call us. Tell me what you need, I’ll tell you what it costs – then we’ll get it done. Penhallow Remodeling Fort Lauderdale serves the city and the surrounding waterfront communities. Free estimates, written quotes, and a real person on the phone. Call (754) 551-2922.
Written by Trevor Nash, Owner at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale homeowners since expanding his South Florida practice to the city’s waterfront and inland communities.
