Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Fence Installation: The Fort Lauderdale Owner’s Guide
Owens Corning fence installation in Fort Lauderdale typically runs $3,500 to $9,000 for a full perimeter fence, depending on linear footage, post depth, and whether we’re replacing existing posts or starting fresh. We install Owens Corning-compatible fencing and can usually match your existing panels and posts within a week of measuring. Most homeowners discover they need replacement after a tropical storm pushes a section over, or when the post sleeves crack at the base where sprinkler water has been hitting them for years.
We’re an independent Fort Lauderdale remodeling contractor, not a factory branch of Owens Corning. What that means for you: we measure against what’s actually in your yard, order the correct series, and install it with concrete footings that hold in South Florida’s sandy, saturated soil. If a section fails inside a year, the 365-Day Done Right Promise covers the return visit and the fix.
Which Owens Corning Models This Applies To
Owens Corning discontinued its residential fencing product lines in the early 2000s, but plenty of Fort Lauderdale homes still have the original panels standing. The two series you’ll most often see around town are the WeatherStrong and the older Classic line. Both use a hollow composite post-and-panel system, and the panels are interchangeable within the same series, but not across them. A Classic panel will not seat properly in a WeatherStrong post channel, and the post cap dimensions differ by roughly a quarter inch.
How to identify what you have: pull one post cap and look for a molded code on the inside lip of the post sleeve. WeatherStrong posts carry a WS prefix. If the cap is rounded rather than squared, you likely have the Classic series. If the markings are gone, measure the panel width. Classic panels are 72 inches wide. WeatherStrong ran both 72-inch and 96-inch panels, and that matters because the 96-inch panels require posts set on 8-foot centers, not the 6-foot centers most local fence contractors assume. Measuring wrong is the most common reason a Fort Lauderdale homeowner ends up with mismatched sections.
For replacement material, you have two honest options: OEM-style panels from a specialty supplier who bought up remaining inventory, or a quality composite aftermarket panel with the same reveal and channel profile. We default to the OEM-style material when it’s available because the color match is closer, and in direct sun a color mismatch shows shamefully fast. Trevor Nash has been matching these systems across South Florida long enough to know which suppliers actually have stock and which are selling faded warehouse remnants at full price.
Styles & brands we work with
Signs Your Owens Corning Fence Installation Is Failing
- Posts leaning at the base after rain. In Fort Lauderdale, the real problem is usually the footing, not the post itself. Shallow concrete plugs, common with original 20-year-old installs, loosen in sandy soil once an irrigation system saturates the ground.
- Cracks running vertically down the post sleeves. UV exposure and salt air degrade the outer composite shell over time. Once a sleeve starts peeling, the interior foam core absorbs water and expands.
- Panels sagging between posts. The bottom rail channels on older panels warp with humidity cycles. You’ll notice it most on west-facing runs that bake in the afternoon sun and then cool under evening storms.
- Panels rattling or lifting in wind. The locking tabs that seat the panel into the post channel break off over time, which is why you’ll see Fort Lauderdale fences with one end of a panel popped loose after summer squalls.
- Chalky, faded surface that won’t clean up. The composite skin eventually loses its protective layer. It isn’t a structural issue, but it’s a visible sign the material has reached its practical lifespan in South Florida conditions.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
| Scope | Typical Price Range (Fort Lauderdale) |
|---|---|
| Replace 3-5 damaged posts, reset panels | $900 – $2,200 |
| Replace one full side (approx. 40-60 linear feet) | $2,800 – $4,500 |
| Full perimeter replacement (100-150 linear feet) | $3,500 – $9,000 |
The range moves based on three things: linear footage, how many existing posts can be reused, and whether we’re pulling a permit. Fort Lauderdale requires permits for fence replacement over a certain height, and we pull them ourselves, which is part of the number. You get a written line-item price before any work starts, so the figure on day one is the figure on the invoice. We don’t write change orders for discovered rot because we inspect the post bases before we quote. Every fence installation includes the 365-Day Done Right Promise in writing, and the materials themselves carry their own manufacturer warranty.
DIY or Call Us?
An Owens Corning fence isn’t high-tension or electrical, so the danger factor is low. But here’s the reality of doing it yourself in Fort Lauderdale: you need a post-hole digger that can get through coral rock pockets, a concrete mixer or strong back, and the patience to set posts plumb on 6-foot or 8-foot centers depending on your panel width. If you’re replacing one broken post and your panel is intact, a careful homeowner with a level and a weekend can handle it. If you’re replacing a full run, the quote is free and the crew arrives on time, which is worth something after you’ve spent a Saturday afternoon fighting a root system.
If you’d rather not find out what’s under your lawn the hard way, call (754) 551-2922. We’ll measure, give you a written number, and install it like it’s going to stand through the next ten hurricane seasons.
FAQs
In Fort Lauderdale’s salt air, UV exposure, and humidity cycles, the composite panels themselves typically last 20 to 25 years, while the post sleeves and footings start showing real problems around the 15-year mark. If your posts are leaning but the panels are still solid, you may only need post replacement.
Yes, if the failure is isolated to a broken locking tab or a cracked post sleeve, individual components can be replaced without redoing the whole fence. If multiple panels are sagging or the channels are warped, patching becomes more expensive than replacing the run. Call (754) 551-2922 and we’ll give you an honest read on which one you’re in.
Most residential Owens Corning fence replacements in Fort Lauderdale take two to four days from digging the first post hole to the final walkthrough. Weather can push that, and so can permit scheduling, which is why we factor both into the written timeline.
We stock the common post caps, locking tabs, and matching fasteners in our Fort Lauderdale shop, and we can source panels and post sleeves within about a week from suppliers who still hold the OEM-style inventory. Unlike some suppliers, we don’t sell you faded remnants; we inspect material before it goes on the truck.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
