Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Fence Installation: The Fort Lauderdale Owner’s Guide
Schluter fence installation in Fort Lauderdale typically runs $3,500 to $9,000 installed, depending on linear footage, substrate condition, and whether we’re replacing a failed run or building new. Most owners discover the problem the hard way: a section pulls loose after a storm, the bottom rail starts rotting where sprinkler overspray hits it, or the gate drags because the post has shifted in sandy soil. We stock Schluter-compatible fence components on our trucks, and Trevor Nash has been matching Fort Lauderdale homeowners with the right hardware for years.
We’re an independent remodeling contractor, not a Schluter dealer or affiliate. That means we can tell you honestly when an OEM part is worth the money and when a quality equivalent does the job for less.
Which Schluter Models This Applies To
Here’s the compatibility gotcha most Fort Lauderdale homeowners run into: Schluter makes several fence lines, and the mounting hardware is not interchangeable across all of them. The Schluter systems we see most in Broward County include the RONDEC, QUADEC, and DESIGNLINE profiles, plus the fence elements used in their shower and balcony applications. You cannot take a bracket sized for a 2-inch post and force it onto a 1.5-inch profile without wallowing out the fastener holes, which is exactly what causes the wobble and eventual pull-out we repair on older installs.
To identify your part, look for the profile name printed on the end cap or the underside of the rail. If the label is gone, measure the outside dimension of the post or rail with a tape measure; Schluter sells these in 1/2-inch increments, and a half-inch mistake is the difference between a clean mount and a call-back. We recommend OEM Schluter hardware when the fence is still under warranty or when the profile is a discontinued color match. For standard satin anodized and brushed finishes, we often install high-grade aftermarket brackets that meet the same load spec and cost 20-30% less.
Styles & brands we work with
Signs Your Schluter Fence Installation Is Failing
- Wobble at the post base: In Fort Lauderdale’s sandy soil, posts set with the wrong anchor depth start leaning within two seasons. The fix is excavation, a proper concrete collar, and re-anchoring, not just tightening a bolt.
- Corrosion at the connector points: Salt air near the Intracoastal and Las Olas eats zinc-plated hardware fast. If you see rust streaks running down from the brackets, the fasteners are failing and need to be swapped for marine-grade stainless.
- Gate drag or misalignment: A gate that scrapes the ground or won’t close square usually means the hinge post has shifted. The hinge itself is rarely the problem; the post footing underneath it is.
- Loose or missing rail end caps: These small pieces keep water out of the rail channel. Once they go missing, standing water pools inside, and corrosion starts from the inside where you can’t see it until the wall of the rail fails.
- Staining or blistering on the finish near the bottom rail: Sprinkler spray and salt mist accelerate finish failure. If you catch it early, a re-coat is cheap; if you wait, you’re replacing the rail section.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Fort Lauderdale Schluter fence installation, expect $3,500 to $9,000. A short run of 20-30 linear feet with good existing footings lands on the low end. A longer run, gate replacement, or repairs where we have to dig and re-set posts in clay or shell rock push toward the high end. We write the price before any work starts, and that number does not move once we open the ground unless you ask us to expand the scope.
Every Schluter fence job includes the mounting hardware, the profile sections, concrete and anchors as needed, and clean removal of the failed materials. You get a written line-item quote, not a verbal ballpark. The work carries the 365-Day Done Right Promise: if your fence fails inside a year, we come back and fix it at no charge, and the second visit costs you nothing.
DIY or Call Us?
You can safely check a few things before you pick up the phone. Grab a level and check each post for plumb. Walk the line and look for rust at the connectors. Wiggle the gate and see if the movement is at the hinge or down at the footing. Those observations tell us a lot and save time on the estimate.
What you shouldn’t do is start pulling anchors or re-setting posts yourself. A fence that lets go in a Fort Lauderdale storm becomes a projectile, and an improperly anchored post in sandy soil will lean again within months no matter how tight you crank the bolt. We’ve repaired enough DIY re-anchors to know the pattern. Call (754) 551-2922 and we’ll send a background-checked technician in uniform who will give you a written number before any work begins.
FAQs
A properly installed Schluter fence with marine-grade stainless hardware lasts 15 to 25 years in Fort Lauderdale’s climate. The finish and the post footings fail long before the aluminum profile does. Poor drainage around the post base or regular sprinkler contact can drop that lifespan significantly. Call (754) 551-2922 if your fence is showing rust or lean; catching it early is a repair, not a replacement.
Yes, in most cases a leaning post or wobbly rail can be repaired by excavating the footing, re-setting the post with a proper concrete collar, and re-anchoring the hardware. The profile sections themselves rarely need to be replaced unless they have corroded from trapped water. We’ll tell you which parts can be saved and which cannot before we quote you a number.
Most residential Schluter fence installs and repairs are completed in one to two working days. Larger runs or multiple gate replacements can stretch to three days. We give you a written arrival window before the crew shows up, and we leave the job site clean at the end of each day, per the Kingswell standard we’ve operated under since 2004.
Yes. Our Fort Lauderdale trucks carry common Schluter-compatible brackets, fasteners, end caps, and rail sections in standard finishes. Specialty colors and discontinued profiles may need to be ordered, which adds a few days. We’ll tell you on the first call whether we can start immediately or need to order. Call (754) 551-2922 and a live person will answer, any hour, to check stock.
If your Schluter fence is leaning, corroded, or just not what it was five years ago, call Penhallow Remodeling Fort Lauderdale at (754) 551-2922 for a free estimate. Tell us what you need, we’ll tell you what it costs, then we’ll get it done. We serve Fort Lauderdale and nearby areas, and we also carry parts for KraftMaid, Cambria, and Silestone products on select jobs.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
