Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The Fort Lauderdale Owner’s Guide
If you own a Therma-Tru product in Fort Lauderdale and a roofing-related component has cracked, warped, or pulled away from the frame, we can match the replacement part and install it right. Therma-Tru roofing components for door and window surrounds, awning assemblies, and entry hoods in Fort Lauderdale typically run $200 – $850 installed depending on the series and how much trim has to come off to get to it. Most Fort Lauderdale homeowners call us after a summer storm or a wet-season mildew bloom exposes a split in the cap, a failed seal, or rust creep where the flashing meets the roofline.
We stock common Therma-Tru-compatible replacement parts on our trucks and can get series-specific pieces direct from the manufacturer’s distribution network within a few days. Penhallow Remodeling Fort Lauderdale is an independent service provider, not affiliated with Therma-Tru, but we source genuine Therma-Tru parts along with quality aftermarket equivalents when the OEM piece is discontinued or backordered.
Which Therma-Tru Models This Applies To
Therma-Tru roofing parts are not universal, and that’s where we see most mismatched repairs happen. The company builds entry canopies, door surrounds with integrated drip caps, and awning assemblies that fit onto Classic-Craft, Fiber-Classic, and Pulse series door systems. The roofline cap for a Classic-Craft entry system will not seat correctly on a Benchmark series door surround, even if the width looks close on a tape measure.
Before we order anything, we look for the series label on the door slab edge or the hinge-side jamb. Therma-Tru prints the model and manufacturing date on a small white sticker, usually with a bar code. If that sticker is gone, we measure the cap profile height, the drip edge overhang, and the reveal width, because a half-inch difference changes the whole fit. For Fort Lauderdale homes, we lean toward genuine Therma-Tru OEM parts when the piece is still in production, because the factory matches the finish texture and the UV-stable coat. When a part is discontinued, we use aftermarket equivalents from suppliers we’ve worked with for years, and we tell you upfront which one you’re getting and why.
One compatibility gotcha we run into often in Fort Lauderdale neighborhoods like Victoria Park and Rio Vista: homes built before the 2002 Florida Building Code update often have older Therma-Tru surrounds with non-standard cap depths, so what looks like a standard replacement cap will sit proud by a quarter inch. We measure before we quote, so the part fits the first time.
Styles & brands we work with
Signs Your Therma-Tru Roofing Is Failing
Therma-Tru roofing components fail in predictable ways in Fort Lauderdale’s salt air and wet-season humidity. Here’s what owners typically see before they call us:
- Visible cracking or splitting along the cap seam. The cap expands and contracts with the heat-and-rain cycle, and once the factory seal breaks, moisture gets in behind the trim. What starts as a hairline crack becomes a water channel within one wet season.
- Rust staining on the drip edge or flashing. Salt air corrodes metal flashing faster here than inland. If you see rust bloom along the roofline above your entry door, the flashing has begun to fail and water is working its way into the surround.
- Mildew or dark streaks on the underside of the canopy. That means water is no longer shedding off the cap; it’s sitting in the seam or running behind the assembly. In Fort Lauderdale’s humidity, mold establishes within thirty days once water gets trapped.
- The cap has pulled away from the house or the door jamb. High winds from summer storms work fasteners loose over time, especially on entry hoods with a wide overhang. A proud cap is a wind catch waiting for the next brush with a tropical storm.
- The door below the roofline sticks or drags in the frame. When water gets behind the trim, it swells the jamb substrate, which shifts the door plane. By the time the door drags, the water has been at work for months.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, Therma-Tru roofing replacement runs $200 – $850 installed for most residential entry canopies, door surrounds, and awning caps. On the low end are simple drip cap swaps with the existing trim intact. On the high end are full surround replacements where the roofline cap, the side rails, and the flashing all come off because water got behind everything.
What you get with our price: the part itself (OEM or aftermarket, disclosed before we order), the labor to remove the failed piece without damaging the door frame, new flashing where the cap meets the house, the correct fasteners for Fort Lauderdale’s pressure-treated and masonry substrates, and haul-off of the old parts. The price is written before any work starts, and it does not change once we open the wall. Your 365-Day Done Right Promise covers the replacement in writing: if the cap fails inside a year, we come back and fix it at no charge, no re-inspection fee, no service call charge.
DIY or Call Us?
I’ll give you the honest split. What you can safely do: check the underside of the canopy with a flashlight for mildew, look at the cap seam for cracking, and pull back any loose caulk by hand to see if the material behind it is soft. That tells you whether you’re dealing with a bad seal or structural water damage. What I would not recommend doing yourself is pulling the cap or the surround off, because the flashing underneath is structural, and in most Fort Lauderdale homes the roofline assembly is tied into the door header. If you break the header flashing, you’ve turned a $300 part into a $1,500 repair, and you’ll be shopping for a door frame too.
Also: roofing work off a ladder near your entry is not the same as swapping a door knob. The steep pitch on some Fort Lauderdale awning assemblies and the wet-season algae on the surface make for a slick ladder. I’d rather you call us at (754) 551-2922 and let us put eyes on it. The estimate is free and the answer comes with a written price, whether the fix is a ten-minute cap swap or a full surround replacement.
FAQs
A Therma-Tru roofing cap or canopy should last 15 – 20 years in Fort Lauderdale if the flashing was installed correctly and the fasteners are stainless or coated for salt air. The finish can start showing UV fade by year eight, but that’s cosmetic. What shortens the lifespan here is water getting behind the trim during a wet season, because once the seal fails, the substrate rots fast.
Call (754) 551-2922 and we’ll tell you whether yours is at end-of-life or just needs a re-caulk and a repaint.
Yes, if the crack is in the finish and not through the material. We can sand, re-prime, and re-coat a cap with a match to the Therma-Tru finish, and that’s often all a Fort Lauderdale home needs after five years of sun. If the crack goes through the material or the flashing is rusted, repair won’t hold and you’re paying twice.
Call us at (754) 551-2922 and we’ll tell you which side of that line you’re on.
Most Therma-Tru roofing part replacements take two to four hours if the surrounding trim is intact. If we have to remove the side rails and replace flashing, it’s a half-day job. We’ll give you the arrival window before we start, and we don’t leave until the job is done and the old parts are off your property.
We stock common caps and drip edges on the truck, so we can often do the swap on the first visit. Call (754) 551-2922 to schedule.
We keep the most common Therma-Tru replacement caps, drip edges, and fasteners on our trucks, so many Fort Lauderdale calls are same-visit fixes. For series-specific pieces or discontinued parts, we order direct from Therma-Tru’s distribution network or through our aftermarket suppliers, and that takes two to five business days. We tell you the day we know.
We also stock parts for KraftMaid, Cambria, and Silestone systems, so if the roofline repair touches a door or surround attached to those brands, we can handle the whole job in one visit. Call (754) 551-2922 for a free estimate on any Therma-Tru roofing part.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
