Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The Fort Lauderdale Owner’s Guide
Tremron roof components installed in Fort Lauderdale typically cost $400 – $1,800 to repair or $8,000 – $20,000 for a full replacement, depending on what failed and how much of the system it took with it. We stock Tremron-compatible flashing, ridge caps, vent collars, and underlayment on our trucks, and we can usually diagnose the issue same day. Most homeowners discover a failing Tremron roof part the way you probably did: a water stain on the ceiling after a heavy afternoon storm, granules collecting in the gutter, or a ridge cap that lifted somewhere along Las Olas or Victoria Park.
You’re not imagining it. Roofing in Fort Lauderdale lives harder than almost anywhere else in the country. Salt air, 60-plus inches of annual rainfall, hurricane-force wind gusts, and relentless UV all chew through roofing components faster than manufacturer averages suggest. A part that should last 20 years in a dry climate often gives out in 12 here. That’s not a Tremron defect. It’s the environment we build in. The good news is that identifying the failed part early keeps a $400 repair from becoming a $12,000 roof deck replacement.
Which Tremron Models This Applies To
Tremron manufactures concrete roof tile in several profiles that show up constantly on Fort Lauderdale homes: flat, low-barrel, and high-barrel configurations, most commonly in the standard 16½-inch by 13-inch tile size. Your specific tile profile matters more than a model name, because Tremron tiles from different series don’t always interlock cleanly. A flat tile won’t seat properly against a barrel tile, and mixing profiles creates gaps where wind-driven rain gets underneath. If you’re matching a cracked or blown-off tile, pull one intact tile and check the underside for the profile shape and overall width. That’s the information that determines whether we’re matching OEM Tremron stock or fitting a certified equivalent with the same dimensions and weight rating.
One compatibility gotcha we see often in Fort Lauderdale: older Tremron installations from the 1990s and early 2000s frequently used a thinner tile than what Tremron produces today. Color and profile may look identical at arm’s length, but the new tile sits a few millimeters higher, and the difference compounds across a roof slope. When we repair these older roofs, we shim the replacement tile or source reclaimed matching pieces where possible. This is the kind of thing that separates a repair that holds through the next hurricane season from one that starts leaking again in October.
Styles & brands we work with
Signs Your Tremron Roofing Is Failing
- Ceiling stains that appear after heavy rain. This usually points to failed underlayment beneath the Tremron tile, not the tile itself. Tile is a water-shedding layer; the underlayment below it is what actually keeps water out of your attic. Once underlayment tears or degrades, water finds the gap.
- Tile granules collecting in gutters or at downspout bases. Concrete tile surfaces erode slowly under Florida sun and rain. Some granule loss is normal. Heavy granule shedding, especially paired with visible pitting on the tile surface, means the tile has lost its protective finish and is absorbing water.
- Lifted or missing ridge caps along the roof peak. Ridge caps take the brunt of wind uplift in Fort Lauderdale storms. If you can see a cap sitting crooked from the street, water has already been getting under it. This is the most common Tremron-specific failure we repair, and it’s usually a sub-$600 fix if caught early.
- Daylight visible through the roof from inside the attic. That means a tile has shifted, broken, or blown off entirely. It doesn’t always show up as a leak right away if the underlayment below is still intact, but it’s an open invitation to pests and wind-driven rain.
- Damp insulation or a musty smell in the attic after any rain, even light rain. This indicates slow moisture intrusion that hasn’t yet stained drywall. By the time a ceiling stain appears, the leak has been active for weeks or months. Check the attic before you check the ceiling.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, Tremron roof repair work falls into a few clear price bands. Isolated tile replacement, ridge cap reseating, and small flashing repairs run $400 – $800. Moderate repairs like replacing a full section of damaged tiles, swapping out vent collars, or patching underlayment in a defined area cost $800 – $1,800. If the failure has compromised the roof deck or spread underlayment rot across a large section, you’re looking at a full or partial roof replacement starting around $8,000, with most Fort Lauderdale homes landing between $12,000 and $20,000 depending on square footage and deck condition.
Every repair we quote includes the same written baseline: the part itself, the labor to install it correctly, disposal of damaged material, and our 365-Day Done Right Promise in writing. If our repair fails inside the guarantee window, we come back and fix it at no charge. We don’t charge a re-inspection fee for a warranty callback. And before any work starts, you’ll have a written number you can hold us to. That’s how Trevor Nash runs every job, from a single ridge cap near Riverside Park to a full tile roof replacement in Coral Ridge.
DIY or Call Us?
Walking a tile roof in Fort Lauderdale is genuinely dangerous. Concrete tile is brittle, and it gets slick with even light moisture and mildew growth, which is a constant in our humidity. A fall from a single-story roof ridge is a hospital trip. We don’t recommend anyone climb onto a tile roof without the right safety equipment and experience walking tile properly. That said, there are safe checks you can do from the ground or from inside: photograph the roof with your phone zoom from the street, check the attic for damp insulation, and inspect gutters for granule buildup.
What you shouldn’t do is lift a tile, pry up a ridge cap, or attempt to re-seat anything. Tile fractures under foot pressure, and a hairline crack you create today becomes a leak in August. If you’ve spotted a problem, call us at (754) 551-2922. We’ll diagnose it, give you a written price, and tell you honestly whether it’s a repair or a replacement. Trevor’s rule on this is simple: tell us what you need, we’ll tell you what it costs, then we’ll get it done.
FAQs
Tremron concrete tile can last 30 to 50 years in dry climates, but in Fort Lauderdale’s salt air and heavy rainfall, expect 20 to 30 years from the tile itself and 12 to 18 years from the underlayment beneath it. The underlayment is almost always what fails first. Call (754) 551-2922 for an inspection if your roof is past the 12-year mark and you’re seeing any of the warning signs above.
Small cracks can sometimes be sealed, but a broken or deeply cracked Tremron tile should be replaced. Sealed cracks in our climate tend to reopen within a year or two as the tile expands and contracts through wet and dry cycles. Replacement is usually the cheaper long-term fix. A single tile replacement runs $400 – $800 including labor, and we’ll match the profile and color as closely as the current Tremron production allows.
Most isolated tile, ridge cap, and flashing repairs in Fort Lauderdale are completed in a single visit, usually two to four hours. Larger repairs that involve underlayment replacement may take a full day. We’ll give you a defined arrival window before we come out, and a written price before we start.
We stock Tremron-compatible flashing, ridge caps, vent collars, and underlayment on our trucks for common Fort Lauderdale installations. For less common profiles or color matches, we source from regional suppliers, typically within a couple of business days. You don’t need to track down parts yourself. We handle sourcing and confirm the part spec with you before work begins. Penhallow Remodeling Fort Lauderdale is an independent service provider and not affiliated with Tremron, but we work with their components regularly, alongside parts for KraftMaid, Cambria, and Silestone products on the remodeling side.
No. The written price we give you before any work starts is the number on the invoice. The only exception is if we open up a section and find hidden damage that genuinely changes the scope, and in that case we stop, show you exactly what we found, and get your sign-off on a new written number before touching anything else. No change orders you didn’t approve. That’s the Penhallow standard, and it’s been our operating rule since the beginning.
If your Tremron roof is showing signs of trouble, don’t wait for the next storm to confirm it. Call (754) 551-2922 and we’ll schedule an inspection, diagnose the failed part, and hand you a written price you can make a decision on. Free estimates, written guarantees, and a real person on the phone when you call.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
