Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ViewLux Fence Installation: The Fort Lauderdale Owner’s Guide
ViewLux fence installation in Fort Lauderdale typically costs $3,500 – $9,000 depending on fence height, linear footage, and whether we’re replacing a failed section or installing a full run. We stock ViewLux-compatible posts, rails, and panel hardware on our trucks, and most repairs are completed in a single visit. Owners usually discover a problem the same way: a gate starts dragging, a panel bows in the afternoon heat, or a post leans after a hard rain. What started as a visual annoyance is now a structural issue, because South Florida’s humidity and sandy soil don’t forgive fence hardware that was undersized from day one.
Which ViewLux Models This Applies To
ViewLux fence systems are built around an aluminum post-and-rail frame with vinyl or composite infill panels. The critical measurement is post spacing: ViewLux rails are cut to fit 6-foot and 8-foot centers, and if your original installer used 7-foot spacing to save on posts, the rails will sag at the midpoint within three to five years in Fort Lauderdale. Check the post cap for a stamped model number, or measure the rail channel width (1.5 inches is the standard ViewLux profile; 2-inch channels are an older series that ViewLux no longer manufactures). For OEM parts, we order direct through ViewLux’s distribution network. For aftermarket equivalents, we match gauge thickness and powder-coat finish so the new section doesn’t stand out. The honest trade-off: OEM guarantees a perfect color match but costs 20 – 30% more and takes 10 – 14 days to arrive. Quality aftermarket stock gets you back to a solid fence faster, and we stand behind it with our written guarantee either way.
Styles & brands we work with
Signs Your ViewLux Fence Installation Is Failing
- Gate sag or drag: The hinge posts weren’t set in enough concrete, or the concrete wasn’t cured before the gate weight went on. In Fort Lauderdale’s sandy soil, a hinge post needs a minimum 24-inch footing with a 12-inch diameter to hold a ViewLux gate long-term.
- Panel bowing or rattling: This is almost always the rail channel spreading. Salt air accelerates it. Once the channel opens up, the panel flexes with every gust off the Atlantic, and the powder coat starts flaking at the stress points.
- Post lean after rain: The footing was poured too shallow, or the installer didn’t account for drainage. In a 2-inch downpour, water pools around the base, saturates the soil, and the post tips. Repairs here mean resetting the post and letting concrete cure for 48 hours before reattaching panels.
- Discolored or chalky finish: UV exposure and salt spray break down cheap powder coatings faster in Fort Lauderdale than almost anywhere in the continental U.S. Quality ViewLux-compatible finishes should look clean for 15+ years, not 5.
- Missing or loose fasteners: If you can count missing screws from the sidewalk, the entire fence was assembled with the wrong hardware. ViewLux specs call for stainless steel fasteners at every bracket; zinc-coated screws in a coastal climate corrode within two years.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a typical Fort Lauderdale yard, full ViewLux fence installation runs $3,500 – $9,000. That’s parts, labor, concrete footings, and hauling away the old fence. On the lower end, you’re looking at a 40 – 50 linear foot run with one gate, flat yard, no tree roots. On the upper end, you’re at 100+ linear feet, double gates, concrete post removal, or a yard with serious grade changes. Section repair work is different: if you’ve got one failed panel and the posts are solid, you’re typically in the $600 – $1,500 range depending on part sourcing and labor time. Every quote we write includes a line-item breakdown: panels, posts, hardware, concrete, and labor. The number we hand you before work starts is the number on the invoice. If something fails inside 365 days, we come back and fix it at no charge, covered in writing on every ViewLux job we do.
DIY or Call Us?
A homeowner can safely check post plaque, rail channel width, and fastener condition with a tape measure and a decent light. That tells us what needs replacing and whether the failure is isolated or systemic. What we don’t recommend is pulling posts or removing rail brackets yourself: an aluminum post under tension from a sagging gate can release fast, and a 6-foot panel with wind behind it is heavier and less cooperative than it looks. Digging out a footing and resetting a post correctly means knowing your soil (sand pockets are common in Fort Lauderdale, and they need a different footing than compacted clay), and that’s where most DIY fence repairs I see start strong and end with a fresh call to us. Call (754) 551-2922 and we’ll come measure, identify the exact ViewLux part, and put a written price in your hand.
FAQs
A properly installed ViewLux fence in Fort Lauderdale lasts 15 – 20 years with minimal maintenance. Aluminum posts and rails with quality powder coat resist the salt air well, but the failure point is usually the footing or the fasteners, not the fence material itself. Call (754) 551-2922 if you want us to inspect an older fence before it becomes a bigger repair.
A leaning post can usually be reset without replacing the post itself, as long as the aluminum isn’t cracked or severely corroded. We dig out the old footing, set the post plumb in fresh concrete with proper drainage, and reattach the panels after curing. Call (754) 551-2922 for an exact quote; estimates are free, and the repair carries our written guarantee.
A full ViewLux fence installation in Fort Lauderdale typically takes 2 – 4 days, depending on linear footage and whether we’re removing an old fence. A single-panel repair is usually a half-day job. We’ll give you a defined arrival window in writing before work starts.
We keep ViewLux-compatible rails, brackets, and stainless fasteners on our trucks, and we can source OEM ViewLux panels quickly through the distribution network. When we arrive for a repair, we bring the part with us. Call (754) 551-2922 and tell us your model number; we’ll confirm whether we have it on hand before we schedule.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
