Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Fence Installation: The Fort Lauderdale Owner’s Guide
Wellborn fence installation in Fort Lauderdale typically runs $3,500 – $9,000 for a complete perimeter job, depending on linear footage, gate hardware, and whether we’re replacing failed sections or starting from scratch. Most owners discover a failing fence the hard way: a gate that drags after a heavy rain, a post that’s started to lean toward the property line, or pickets that have pulled free from the rails after one too many afternoon thunderstorms. If you’re standing in your backyard on a muggy Tuesday looking at a section that’s no longer doing its job, here’s what to expect.
We’re an independent service provider, not affiliated with Wellborn. But we work with Wellborn and Wellborn-compatible fence systems constantly across Fort Lauderdale, and we stock the hardware and fasteners that hold up in this specific climate. Salt air, hurricane season, and a water table that sits close to the surface all change how a fence should be installed here. A fence that works fine in Georgia fails in three years in Rio Vista or Victoria Park if the posts weren’t set right.
Which Wellborn Models This Applies To
Wellborn’s residential fence lines split into a few series: their classic wood privacy panels, their vinyl and composite lines, and aluminum styles that read more ornamental than industrial. The compatibility question matters most when you’re replacing a section rather than an entire run. A Wellborn 6-foot privacy panel from their standard series will not simply drop into the posts from their estate series. Rail spacing, post dimensions, and bracket style changed between series, which is the first thing we check on site.
Before you call, look for the small stamped serial tag on the interior face of a picket or on the horizontal rail near a corner post. If that tag is gone, we measure the panel width, the rail thickness, and the post interior dimension. In Fort Lauderdale, we see a lot of Wellborn product that was bought at different times, so a fence put up in 2018 and a replacement panel bought in 2024 may not match exactly even if both say Wellborn on the invoice. We source OEM Wellborn components where they’re still available and use quality aftermarket equivalents when the series has been discontinued. The aftermarket route often saves money without changing performance, but only if the profile and fasteners are correct for this climate. Stainless or coated fasteners are not optional here, not when the humidity sits above 80 percent for months at a stretch.
We also stock and install parts for KraftMaid, Cambria, and Silestone systems, though fencing work is where Wellborn questions come to us most often.
Styles & brands we work with
Signs Your Wellborn Fence Installation Is Failing
- Leaning posts that get worse after rain. This usually means the original installer set posts in soil without enough concrete depth, or used a shallow footing that’s been undermined by Fort Lauderdale’s drainage patterns. Once a post starts leaning, it won’t straighten itself, and attached panels will eventually pull rails out of alignment.
- Gate drag and pinched corners. A gate that scrapes the ground or won’t latch square is almost always a post that has shifted, not a hinge that failed. Swapping the hinge doesn’t fix the post, and the gate will sag again in a month.
- Pickets separating from rails. In humid, salty air, cheap fasteners corrode and swell, working themselves loose. You’ll see pickets that rattle, then drop. This is especially common on the east side of Fort Lauderdale where the ocean breeze carries salt a surprising distance inland.
- Powdery white or gray residue at the base of vinyl posts. This is environmental stress cracking starting, often from UV exposure combined with soil movement. It shows up first at the stress points where the post meets concrete, and it spreads upward from there.
- Mold streaks and rot at rail ends on wood fences. Fort Lauderdale’s wet season means any wood-to-wood contact that traps moisture rots from the inside. By the time you see a dark streak on the outside, the rail end has usually lost structural strength.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Fort Lauderdale Wellborn fence work, you’re looking at $3,500 – $9,000 installed for a typical residential perimeter. What drives the number: total linear feet (obviously), whether posts can be reused or need new concrete footings, gate count and gate hardware, and whether you’re on a corner lot with more exposed face than a mid-block property. A straight 120-foot run with two gates near Coral Ridge might land around the middle of that range. A 200-foot job with custom gate work near Harbor Beach will push toward the top.
Every quote includes the materials, tear-out of failing sections, post setting to the correct depth for our soil, rail and picket installation, gate alignment, and cleanup. We give you a written price before any work starts, and that’s the number on the invoice. No change orders unless you ask for additional scope while we’re on site. The work carries our 365-Day Done Right Promise: if the fence fails inside the guarantee period, we come back and fix it at no charge. That’s in writing, on every job.
DIY or Call Us?
There are a couple of things you can safely do yourself before you pick up the phone. You can check whether a gate is out of square, look for pulled fasteners, and see if a post wiggles when you push it. That’s useful information for us, and it costs you nothing. What you should not do is try to reset a leaning post by shoveling soil around it, and you should not attempt to pull a bowed section straight with a come-along and a tree. We have seen both, and both end with a fence section on the ground and a longer repair bill. Fence work is not high-tension like a garage spring, but incorrect post setting in Fort Lauderdale soil gives you a slow-motion failure that nobody notices until the whole section lists toward the neighbor’s yard.
If the section is leaning, the footing is shot, and that’s a job for a crew that’s done it in this soil. Call (754) 551-2922 and Trevor will tell you what he thinks, what it costs, and when we can be there. No pressure, no vague ballpark.
FAQs
A correctly installed Wellborn vinyl or composite fence generally lasts 18 to 25 years in Fort Lauderdale, while wood runs closer to 10 to 15 years with proper sealing and maintenance. The climate is hard on fences here, so give us a call at (754) 551-2922 and we’ll tell you what your specific material and site conditions suggest for a realistic lifespan.
Yes, in many cases we can replace the failed sections, reset posts, and rehang gates instead of tearing out the whole run, provided the remaining structure is sound and the series components are still available or matchable. Call (754) 551-2922 and we’ll assess what’s salvageable before you spend a dollar.
Most Wellborn fence replacements in Fort Lauderdale take one to three days on site, with concrete curing time on the posts adding a day before we hang gates and final panels depending on the weather. We’ll give you a defined arrival window and a clear schedule before any work starts.
We keep common Wellborn-compatible brackets, coated fasteners, rail hangers, and gate hardware in our work vehicles, and we order OEM panels or aftermarket profile-matched components for your specific series before we arrive. If we can identify the series before the visit, the parts are on the truck day one.
If you’re in Fort Lauderdale and your Wellborn fence has a problem, call (754) 551-2922 for a free estimate. We’ll give you a written number, a real schedule, and a guarantee on the work before we lift a single post out of the ground.
Written by Trevor Nash, Owner, Penhallow Remodeling Fort Lauderdale at Penhallow Remodeling Fort Lauderdale, serving Fort Lauderdale and nearby areas.
